Download or read book Scaling Analysis in Modeling Transport and Reaction Processes written by William B. Krantz and published by John Wiley & Sons. This book was released on 2007-06-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique as the first effort to expound on the subject of systematic scaling analysis. Not written for a specific discipline, the book targets any reader interested in transport phenomena and reaction processes. The book is logically divided into chapters on the use of systematic scaling analysis in fluid dynamics, heat transfer, mass transfer, and reaction processes. An integrating chapter is included that considers more complex problems involving combined transport phenomena. Each chapter includes several problems that are explained in considerable detail. These are followed by several worked examples for which the general outline for the scaling is given. Each chapter also includes many practice problems. This book is based on recognizing the value of systematic scaling analysis as a pedagogical method for teaching transport and reaction processes and as a research tool for developing and solving models and in designing experiments. Thus, the book can serve as both a textbook and a reference book.

Download or read book Tokamaks written by John Wesson and published by Oxford University Press. This book was released on 2011-10-13 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tokamak is the principal tool in controlled fusion research. This book acts as an introduction to the subject and a basic reference for theory, definitions, equations, and experimental results. The fourth edition has been completely revised, describing their development of tokamaks to the point of producing significant fusion power.

Download or read book Plasma Science written by Panel on Opportunities in Plasma Science and Technology and published by National Academies Press. This book was released on 1995-01-15 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma science is the study of ionized states of matter. This book discusses the field's potential contributions to society and recommends actions that would optimize those contributions. It includes an assessment of the field's scientific and technological status as well as a discussion of broad themes such as fundamental plasma experiments, theoretical and computational plasma research, and plasma science education.

Download or read book Scaling of Differential Equations written by Hans Petter Langtangen and published by Springer. This book was released on 2016-06-15 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves both as a reference for various scaled models with corresponding dimensionless numbers, and as a resource for learning the art of scaling. A special feature of the book is the emphasis on how to create software for scaled models, based on existing software for unscaled models. Scaling (or non-dimensionalization) is a mathematical technique that greatly simplifies the setting of input parameters in numerical simulations. Moreover, scaling enhances the understanding of how different physical processes interact in a differential equation model. Compared to the existing literature, where the topic of scaling is frequently encountered, but very often in only a brief and shallow setting, the present book gives much more thorough explanations of how to reason about finding the right scales. This process is highly problem dependent, and therefore the book features a lot of worked examples, from very simple ODEs to systems of PDEs, especially from fluid mechanics. The text is easily accessible and example-driven. The first part on ODEs fits even a lower undergraduate level, while the most advanced multiphysics fluid mechanics examples target the graduate level. The scientific literature is full of scaled models, but in most of the cases, the scales are just stated without thorough mathematical reasoning. This book explains how the scales are found mathematically. This book will be a valuable read for anyone doing numerical simulations based on ordinary or partial differential equations.

Download or read book The Department of Energy s Restructured Fusion Energy Sciences Program written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1996 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Hydraulics Methods Instrumentation Data Processing and Management written by Marian Muste and published by CRC Press. This book was released on 2017-07-28 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume guide to designing, conducting and interpreting laboratory and field experiments in a broad range of topics associated with hydraulic engineering. Specific guidance is provided on methods and instruments currently used in experimental hydraulics, with emphasis on new and emerging measurement technologies and methods of analysis. Additionally, this book offers a concise outline of essential background theory, underscoring the intrinsic connection between theory and experiments. This book is much needed, as experimental hydraulicians have had to refer to guidance scattered in scientific papers or specialized monographs on essential aspects of laboratory and fieldwork practice. The book is the result of the first substantial effort in the community of hydraulic engineering to describe in one place all the components of experimental hydraulics. Included is the work of a team of more than 45 professional experimentalists, who explore innovative approaches to the vast array of experiments of differing complexity encountered by today’s hydraulic engineer, from laboratory to field, from simple but well-conceived to complex and well-instrumented. The style of this book is intentionally succinct, making frequent use of convenient summaries, tables and examples to present information. All researchers, practitioners, and students conducting or evaluating experiments in hydraulics will find this book useful.

Download or read book Crashworthiness of Transportation Systems Structural Impact and Occupant Protection written by Jorge A.C. Ambrósio and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic treatment of current crashworthiness practice in the automotive, railroad and aircraft industries. Structural, exterior and interior design, occupant biomechanics, seat and restraint systems are dealt with, taking account of statistical data, current regulations and state-of-the-art design tool capabilities. Occupant kinematics and biomechanics are reviewed, leading to a basic understanding of human tolerance to impact and of the use of anthropometric test dummies and mathematical modelling techniques. Different types of restraining systems are described in terms of impact biomechanics. The material and structural behaviour of vehicle components is discussed in relation to crash testing. A variety of commonly used techniques for simulating occupants and structures are presented, in particular the use of multibody dynamics, finite element methods and simplified macro-elements, in the context of design tools of increasing complexity, which can be used to model both vehicles and occupants. Audience: An excellent reference for researchers, engineers, students and all other professionals involved in crashworthiness work.

Download or read book Heat Transfer written by Anthony F. Mills and published by CRC Press. This book was released on 1992 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developing Solid Oral Dosage Forms written by Yihong Qiu and published by Academic Press. This book was released on 2016-11-08 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing Solid Oral Dosage Forms: Pharmaceutical Theory and Practice, Second Edition illustrates how to develop high-quality, safe, and effective pharmaceutical products by discussing the latest techniques, tools, and scientific advances in preformulation investigation, formulation, process design, characterization, scale-up, and production operations. This book covers the essential principles of physical pharmacy, biopharmaceutics, and industrial pharmacy, and their application to the research and development process of oral dosage forms. Chapters have been added, combined, deleted, and completely revised as necessary to produce a comprehensive, well-organized, valuable reference for industry professionals and academics engaged in all aspects of the development process. New and important topics include spray drying, amorphous solid dispersion using hot-melt extrusion, modeling and simulation, bioequivalence of complex modified-released dosage forms, biowaivers, and much more. - Written and edited by an international team of leading experts with experience and knowledge across industry, academia, and regulatory settings - Includes new chapters covering the pharmaceutical applications of surface phenomenon, predictive biopharmaceutics and pharmacokinetics, the development of formulations for drug discovery support, and much more - Presents new case studies throughout, and a section completely devoted to regulatory aspects, including global product regulation and international perspectives

Download or read book Chemical Engineering in the Pharmaceutical Industry written by Mary T. am Ende and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the important chemical engineering concepts for the development of new drugs, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry offers a guide to the experimental and computational methods related to drug product design and development. The second edition has been greatly expanded and covers a range of topics related to formulation design and process development of drug products. The authors review basic analytics for quantitation of drug product quality attributes, such as potency, purity, content uniformity, and dissolution, that are addressed with consideration of the applied statistics, process analytical technology, and process control. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The contributors explore technology transfer and scale-up of batch processes that are exemplified experimentally and computationally. Written for engineers working in the field, the book examines in-silico process modeling tools that streamline experimental screening approaches. In addition, the authors discuss the emerging field of continuous drug product manufacturing. This revised second edition: Contains 21 new or revised chapters, including chapters on quality by design, computational approaches for drug product modeling, process design with PAT and process control, engineering challenges and solutions Covers chemistry and engineering activities related to dosage form design, and process development, and scale-up Offers analytical methods and applied statistics that highlight drug product quality attributes as design features Presents updated and new example calculations and associated solutions Includes contributions from leading experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduation students, and professionals in the field of pharmaceutical sciences and manufacturing, Chemical Engineering in the Pharmaceutical Industry, Second Edition contains information designed to be of use from the engineer's perspective and spans information from solid to semi-solid to lyophilized drug products.

Download or read book Flowfield Modeling and Diagnostics written by Ashwani K. Gupta and published by Taylor & Francis. This book was released on 1985 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 2004. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book High Energy Density Physics written by R Paul Drake and published by Springer. This book was released on 2018-01-02 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The raw numbers of high-energy-density physics are amazing: shock waves at hundreds of km/s (approaching a million km per hour), temperatures of millions of degrees, and pressures that exceed 100 million atmospheres. This title surveys the production of high-energy-density conditions, the fundamental plasma and hydrodynamic models that can describe them and the problem of scaling from the laboratory to the cosmos. Connections to astrophysics are discussed throughout. The book is intended to support coursework in high-energy-density physics, to meet the needs of new researchers in this field, and also to serve as a useful reference on the fundamentals. Specifically the book has been designed to enable academics in physics, astrophysics, applied physics and engineering departments to provide in a single-course, an introduction to fluid mechanics and radiative transfer, with dramatic applications in the field of high-energy-density systems. This second edition includes pedagogic improvements to the presentation throughout and additional material on equations of state, heat waves, and ionization fronts, as well as problem sets accompanied by solutions.

Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 3, Procedures and Applications includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout

Download or read book Transport Processes in Chemically Reacting Flow Systems written by Daniel E. Rosner and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Processes in Chemically Reacting Flow Systems discusses the role, in chemically reacting flow systems, of transport processes—particularly the transport of momentum, energy, and (chemical species) mass in fluids (gases and liquids). The principles developed and often illustrated here for combustion systems are important not only for the rational design and development of engineering equipment (e.g., chemical reactors, heat exchangers, mass exchangers) but also for scientific research involving coupled transport processes and chemical reaction in flow systems. The book begins with an introduction to transport processes in chemically reactive systems. Separate chapters cover momentum, energy, and mass transport. These chapters develop, state, and exploit useful quantitative ""analogies"" between these transport phenomena, including interrelationships that remain valid even in the presence of homogeneous or heterogeneous chemical reactions. A separate chapter covers the use of transport theory in the systematization and generalization of experimental data on chemically reacting systems. The principles and methods discussed are then applied to the preliminary design of a heat exchanger for extracting power from the products of combustion in a stationary (fossil-fuel-fired) power plant. The book has been written in such a way as to be accessible to students and practicing scientists whose background has until now been confined to physical chemistry, classical physics, and/or applied mathematics.

Download or read book Special Report written by and published by . This book was released on 1989 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterisation of Areal Surface Texture written by Richard Leach and published by Springer Science & Business Media. This book was released on 2013-04-03 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The function of a component part can be profoundly affected by its surface topography. There are many examples in nature of surfaces that have a well-controlled topography to affect their function. Examples include the hydrophobic effect of the lotus leaf, the reduction of fluid drag due to the riblet structure of shark skin, the directional adhesion of the gecko foot and the angular sensitivity of the multi-faceted fly eye. Surface structuring is also being used extensively in modern manufacturing. In this way many properties can be altered, for example optical, tribological, biological and fluidic. Previously, single line (profile) measurements were adequate to control manufacture of surfaces, but as the need to control the functionality of surfaces increases, there is a growing need for three-dimensional (areal) measurement and characterisation techniques. For this reason there has been considerable research, development and standardisation of areal techniques. This book will present the areal framework that is being adopted by the international community. Whereas previous books have concentrated on the measurement aspects, this book concentrates on the characterisation techniques, i.e. how to interpret the measurement data to give the appropriate (functional) information for a given task. The first part of the book presents the characterisation methods and the second part case studies that highlight the use of areal methods in a broad range of subject areas - from automobile manufacture to archaeology. Contents Introduction to Surface Topography The Areal Field Parameters The Areal Feature Parameters Areal Filtering Methods Areal Form Removal Areal Fractal Methods Choosing the Appropriate Parameter Characterisation of Individual Areal Features Multi-Scale Signature of Surface Topography Correlation of Areal Surface Texture Parameters to Solar Cell Efficiency Characterisation of Cylinder Liner Honing Textures for Production Control Characterisation of the Mechanical Bond Strength for Copper on Glass Plating Applications Inspection of Laser Structured Cams and Conrods Road Surfaces

Download or read book Biotechnological Approaches in Waste Management written by Rangabhashiyam S and published by CRC Press. This book was released on 2022-11-14 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste generation from industrial and domestic sectors is imposing a very challenging environment and the intervention of biotechnology offers a viable solution for their effective management. This book deals with the employment of biotechnological aspects for waste treatment including the basic concepts, biochemical processes, and various technologies for pollutant reduction and production of value-added products for a cleaner environment. It covers different aspects of biotechnology in the conservation of environment dealing with the sustainable management of waste through the concept of waste-to-economy along with the management of environmental pollutants and natural resource conservation. Focuses on ecological approaches i.e., the use of biocatalysts and biotechnological approaches for waste management Explores the different biotechnology-based solutions for the removal of environmental pollutants Covers various microbiological routes, technological options for waste to energy, removal of contaminants, and the production of value-added products Reviews the bioremediation potential of microbial strains and enzymes Explores the significant routes of biotechnological means of obtaining eco-friendly products substituting the hazardous chemical-based products This volume is aimed at researchers and professionals in environmental, biotechnology, and chemical engineering.