Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by Elsevier. This book was released on 2014-05-30 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers Includes data on additional materials and applications, particularly in automotive and medical industries
Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by William Andrew. This book was released on 2007-08-11 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are few if any adequate guides to the properties, processing, and applications of thermoplastic elastomers, in spite the skyrocketing rise in the use of these materials. Until now. This new book sets the standard for a reference on these materials by compiling in one comprehensive volume an applicable knowledge of the chemistry, processing, and all properties, and uses of thermoplastic elastomers. Copiously illustrated and full of applicable processing and engineering data, this is the very definition of a ""definitive"" user's guide.
Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by William Andrew Pub. This book was released on 2014-06-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added - particularly in the growing automotive and medical fields - and changes in chemistry and processing technology are covered. Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers Includes data on additional materials and applications, particularly in automotive and medical industries
Download or read book Thermoplastic Elastomers written by Chapal Kumar Das and published by BoD – Books on Demand. This book was released on 2015-11-26 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic elastomers (TPEs), commonly known as thermoplastic rubbers, are a category of copolymers having thermoplastic and elastomeric characteristics. A TPE is a rubbery material with properties very close to those of conventional vulcanized rubber at normal conditions. It can be processed in a molten state even at elevated temperatures. TPEs show advantages typical of both rubbery materials and plastic materials. TPEs are a class of polymers bridging between the service properties of elastomers and the processing properties of thermoplastics. Nowadays, the best use of thermoplastics is in the field of biomedical applications, starting from artificial skin to many of the artificial human body parts. Apart from these, thermoplastic elastomers are being used for drug encapsulation purposes, and since they are biocompatible in many cases, their scope of applications has been broadened in the biotechnological field as well. The present book highlights many biological and biomedical applications of TPEs from which the broader area readers will benefit.
Download or read book Understanding Thermoplastic Elastomers written by Geoffrey Holden and published by Hanser Gardner Publications. This book was released on 2000 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the outstanding advantages of TPE's can be summarized in a single phrase: They allow rubberlike articles to be produced using the rapid processing techniques developed by the thermoplastic industry.
Download or read book Thermoplastic Elastomers written by P. W. Dufton and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains discussion of the different families of thermoplastic elastomer materials, and of the trends in material developments. The key end-use sectors are analysed in terms of material usage and future trends.
Download or read book Thermoplastic Elastomers written by Günter Scholz and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-08-02 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a qualified and fast view into the world of TPE including the difference to rubber materials. It describes their classification as they are presented in the market, characterization, manufacturing, processing and behavior. Aside from the self-learning option, it is a companion to seminars and studies about elastomers.
Download or read book Thermoplastic Elastomers written by Günter Scholz and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-08-02 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a qualified and fast view into the world of TPE including the difference to rubber materials. It describes their classification as they are presented in the market, characterization, manufacturing, processing and behavior. Aside from the self-learning option, it is a companion to seminars and studies about elastomers.
Download or read book Understanding Thermoplastic Elastomers written by G. Holden and published by . This book was released on 2000 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the outstanding advantages of TPE's can be summarized in a single phrase: They allow rubberlike articles to be produced using the rapid processing techniques developed by the thermoplastic industry. The commercial development of TPE's enabled the rubber industry to utilize new processing techniques including blow molding, comolding and coextrusion, hot melt coating of pressure sensitive adhesives, and direct injection molding. New products, new processing techniques, new properties, and new applications have been experienced in the last decade. All this is reflected in this general introduction to the subject.
Download or read book Handbook of Thermoplastic Elastomers written by Benjamin M. Walker and published by . This book was released on 1979 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoplastic Elastomers written by J. A. Brydson and published by iSmithers Rapra Publishing. This book was released on 1995 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nature and general properties of TPE's are explained, and the classes of materials considered in turn include styrenic block copolymers, polyether-esters, polyamides, polyurethanes, polyolefins and other miscellaneous systems. Developments in specific market sectors are also outlined. The review is supported by an extensive References and Abstracts section, containing over 400 abstracts, which provide a great deal more information on these useful materials.
Download or read book Handbook of Condensation Thermoplastic Elastomers written by Stoyko Fakirov and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reporting on the work of an international team of scientists actively involved in the study of thermoplastic elastomers (TPE) based on polyesters, polyamides, and polyurethanes, this book is the first to provide a detailed description of condensation TPE with close attention paid to polyamide-based systems. Reflecting the increasing importance of TPE as engineering plastics, the authors discuss the widened application opportunities by preparing systems with various chemical compositions and molecular structures as (semi-) interpenetrating networks. The contents also cover the chemical aspects, physical structure and properties, life cycle assessment, and recycling possibilities as well as such unique "smart" properties like the shape memory effect of the three classes of thermoplastic elastomers.
Download or read book Thermoplastic Elastomers written by Adel El-Sonbati and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastics can be used for various applications, which range from household articles to the aeronautic sector. This book, "Thermoplastic Elastomers", is comprised of nineteen chapters, written by specialized scientists dealing with physical and/or chemical modifications of thermoplastics and thermoplastic starch. Such studies will provide a great benefit to specialists in food, electric, telecommunication devices, and plastic industries. Each chapter provides a comprehensive introduction to a specific topic, with a survey of developments to date.
Download or read book Advanced Elastomers written by Anna Boczkowska and published by BoD – Books on Demand. This book was released on 2012-09-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an extensive overview of current trends in the area of elastomers and their composites from the chapters contributed by internationally recognized specialists. The book deals with novel synthesis, modelling and experimental methods in elastomers. Contents include: new approach to crosslinking, liquid crystal elastomers, nanocomposites, smart elastomers, elastomers in microelectronics and microfluidics, elastomers in cement concrete and mortar, experimental testing and modelling. Each section demonstrates how enhancements in materials, processes and characterization techniques can improve performance in the field of engineering. The book provides a unique opportunity to discover the latest research on elastomer advances from laboratories around the world. This book addresses to industrial and academic researchers in the fields of physical, chemical, biological sciences and engineering.
Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.
Download or read book Developments in Thermoplastic Elastomers written by K. E. Kear and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic elastomers (TPEs) have the elastic behaviour of rubber and the processability of thermoplastics. The Freedonia Group has forecast that demand will expand by 6.4% per year to around 2.15 million tons in 2006. There is potential for these new, exciting materials to expand into the much larger thermoset rubber markets. This review includes comparisons between the two material types. There are three major types of TPE: block copolymers, rubber/plastic blends and dynamically vulcanised rubber/plastic alloys known as thermoplastic vulcanisates. The chemistry of these materials and how.
Download or read book Handbook of Elastomers Second Edition written by Anil K. Bhowmick and published by CRC Press. This book was released on 2000-11-02 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides the latest authoritative research on the developments, technology, and applications of rubbery materials. Presents structures, manufacturing techniques, and processing details for natural and synthetic rubbers, rubber-blends, rubber composites, and thermoplastic elastomers. 80% revised and rewritten material covers major advances since publication of the previous edition."
