Download or read book Understanding Thermoforming written by James L. Throne and published by Hanser Verlag. This book was released on 2008 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern thermoforming practice is a balance of practical experience and the application of engineering principles. This very practical book introduces the process, its tools and machinery, and the commonly used materials to novices and practicing engineers alike.
Download or read book Understanding Thermoforming written by James L. Throne and published by Hanser Publications. This book was released on 2008 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern thermoforming practice is a balance of practical experience and the application of engineering principles. This very practical book introduces the process, its tools and machinery, and the commonly used materials to novices and practicing engineers alike.
Download or read book Fundamentals of Plastics Thermoforming written by Peter Klein and published by Springer Nature. This book was released on 2022-06-01 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental Issues
Download or read book Thermoforming of Single and Multilayer Laminates written by Syed Ali Ashter and published by William Andrew. This book was released on 2013-11-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoforming of Single and Multilayer Laminates explains the fundamentals of lamination and plastics thermoforming technologies along with current and new developments. It focuses on properties and thermoforming mechanics of plastic films and in particular single and multilayered laminates, including barrier films. For environmental and economic reasons, laminates are becoming increasingly important as a replacement for solid sheets and paint finishes in many industries, including transportation, packaging, and construction. Yet the processes of film formability during the extensive deformation and elevated temperatures experienced in conventional processing technologies, such as thermoforming, are poorly understood by most engineers. This book covers production processes, such as extrusion, calendaring, and casting, as well as mechanical and impact testing methods. It also describes how testing protocols developed for metals can be leveraged for plastic films and laminates, and includes a thorough discussion on methods for performing optical strain analysis. Applications in transportation vehicles and packaging, including packaging for food, medical and electronics applications, sports equipment, and household appliances, are discussed. Safety, recycling and environmental aspects of thermoforming and its products complete the book. First comprehensive source of information and hands-on guide for the thermoforming of multilayered laminates Covers applications across such sectors as automotive, packaging, home goods, and construction Introduces new testing methods leveraging protocols used for metals
Download or read book Advanced Thermoforming written by Sven Engelmann and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the latest innovations in thermoforming materials, processes, and applications Advanced Thermoforming brings readers fully up to date with the latest standards, processes, materials, and applications in the field. From forming to filling to sealing processes, the author explains everything that can now be accomplished using the most advanced thermoforming technologies available. Moreover, readers learn how to fully leverage these technologies in order to design and manufacture products that meet all specifications at minimum cost and maximum efficiency. Emphasizing the application of advanced thermoforming for the production of technical parts and packaging, the book: Guides readers through all facets of development, design, and machine and mold technology Recommends new technologies that offer higher productivity, better quality, and lower costs Describes common raw materials used in thermoforming, including how specific materials affect the production process Explains the proper handling of semi-finished products and formed parts Sets forth the basic principles of extrusion, an essential process underlying thermoforming Introduces the latest software techniques to simulate the thermoforming of new products Throughout the book, readers learn about the latest innovations in thermoforming, from thermoformed automobile body parts to fully automated packaging assembly lines. The author offers valuable content from his interviews with leading industrial thermoformers, sharing insights and tips from their years of hands-on experience with readers. With Advanced Thermoforming as their guide, polymer and plastics engineering professionals and students can now explore and exploit the full range of possibilities that thermoforming technology offers.
Download or read book Thermoforming Improving Process Performance written by Stanley R. Rosen and published by Society of Manufacturing Engineers. This book was released on 2002 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoforming is a processing technique involving air pressure applied to heated plastic, and combines the earlier terminology of vacuum-formed and pressure-formed operations. A specialist in thermoforming, mechanical engineer Rosen describes the roll-fed process, properties of plastic materials, designing products, thermoforming machines, trim presses, knife-like trim dies, and off-line punch-and-die trimming. Chapters on molds cover mold design, system components, layout and base design, and cost estimating. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Thermoforming written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2024-06-21 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive reference manual that contains essential information on thermoforming processing and technology. The field of thermoforming is experiencing rapid development driven by commercial factors; millions of tons of polymers are manufactured for use in various applications, both as commodity and specialty polymers. Building on the previous edition published about ten years ago, this edition includes new, as well as, fully revised chapters and updated information on materials and processes. The book is designed to provide practitioners with essential information on processing and technology in a concise manner. The book caters to both engineers and experts by providing introductory aspects, background information, and an overview of thermoforming processing and technology. The troubleshooting section includes flowcharts to assist in correcting thermoforming processes. p”emThermoforming: Processing and Technology offers a complete account of thermoplastics, covering properties and forming, with chapters providing perspective on the technologies involved. Readers will find it: serves as a handy knowledge source for professionals who occasionally work on thermoforming projects or need to refresh their knowledge; offers a troubleshooting guide that can help to identify and solve challenges that may arise in thermoforming processes; provides insights into process optimization, helping businesses improve efficiency, reduce waste, and enhance the quality of thermoformed products; acts as a course book to inform students about the thermoforming process. Audience The book will be of interest to mechanical, materials engineers, and process engineers who are involved in designing and optimizing thermoforming processes; professionals in the manufacturing and production industries who use thermoforming as a manufacturing method, such as in the production of plastic packaging, automotive components, and consumer goods; scientists, researchers, and students in plastics/polymer engineering and technology, materials science, polymer technology; professionals responsible for ensuring product quality and compliance with industry standards.
Download or read book Fundamentals of Plastics Thermoforming written by Peter Klein and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental Issues
Download or read book Manufacturing and Design written by Erik Tempelman and published by Elsevier. This book was released on 2014-03-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Design presents a fresh view on the world of industrial production: thinking in terms of both abstraction levels and trade-offs. The book invites its readers to distinguish between what is possible in principle for a certain process (as determined by physical law); what is possible in practice (the production method as determined by industrial state-of-the-art); and what is possible for a certain supplier (as determined by its production equipment). Specific processes considered here include metal forging, extrusion, and casting; plastic injection molding and thermoforming; additive manufacturing; joining; recycling; and more. By tackling the field of manufacturing processes from this new angle, this book makes the most out of a reader's limited time. It gives the knowledge needed to not only create well-producible designs, but also to understand supplier needs in order to find the optimal compromise. Apart from improving design for production, this publication raises the standards of thinking about producibility. - Emphasizes the strong link between product design and choice of manufacturing process - Introduces the concept of a "production triangle" to highlight tradeoffs between function, cost, and quality for different manufacturing methods - Balanced sets of questions are included to stimulate the reader's thoughts - Each chapter ends information on the production methods commonly associated with the principle discussed, as well as pointers for further reading - Hints to chapter exercises and an appendix on long exercises with worked solutions available on the book's companion site: http://booksite.elsevier.com/9780080999227/
Download or read book Practical Thermoforming Principles and Applications written by Florian and published by CRC Press. This book was released on 1996-08-09 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides in-depth coverage of the entire thermoforming molding process from market domain and materials options to manufacturing methods and peripheral support. Second Edition furnishes entirely new information on twin sheet forming, corrugated tubing and pipe manufacturin gtechniques, plastics recycling, forthcoming equipment, and energy and labor costs."
Download or read book Handbook of Troubleshooting Plastics Processes written by John R. Wagner, Jr. and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a framework for understanding how to characterize plastic manufacturing processes for use in troubleshooting problems. The 21 chapters are authored by well-known and experienced engineers who have specialized knowledge about the processes covered in this practical guide. From the Preface: “In every chapter, the process is described and the most common problems are discussed along with the root causes and potential technical solutions. Numerous case studies are provided that illustrate the troubleshooting process. Mark A. Spalding, The Dow Chemical Company
Download or read book Thermoforming written by Peter Schwarzmann and published by . This book was released on 2018-12-10 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoforming is an area of plastics processing with especially high growth, applying to both production of technical parts as well as for packaging. In the area of plastics packaging, thermoforming is unrivaled as a processing method. This popular and unparalleled book has been substantially extended and revised in its second edition. New topics include thermoforming tools, decoration in thermoforming, and energy usage in thermoforming. In addition to the thermoplastic materials, all procedural steps of thermoforming as well as the essential machine types and fundamentals of making tools and molds are described comprehensively and illustrated with practical examples. This is a practical manual for both beginners and experienced professionals, based on a well-proven teaching program employed in training courses, with detailed descriptions of the principles and processes of thermoforming. It provides an introduction to the topic for students, as well as the fundamental knowledge for deeper treatment of specific problems for working engineers and technicians with practical field experience.
Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.
Download or read book Plastic Product Material and Process Selection Handbook written by Dominick V Rosato and published by Elsevier. This book was released on 2004-08-04 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for people involved in working with plastic material and plastic fabricating processes. The information and data in this book are provided as a comparative guide to help in understanding the performance of plastics and in making the decisions that must be made when developing a logical approach to fabricating plastic products to meet performance requirements at the lowest costs. It is formatted to allow for easy reader access and this care has been translated into the individual chapter constructions and index. This book makes very clear the behaviour of the 35,000 different plastics with the different behaviours of the hundreds of processes. Products reviewed range from toys to medical devices, to cars, to boats, to underwater devices, containers, springs, pipes, aircraft and spacecraft. The reader's product to be designed and/or fabricated can be directly or indirectly related to plastic materials, fabricating processes and/or product design reviews in this book.*Essential for people involved in working with plastic material and plastic fabricating processes *Will help readers understand the performance of plastics *Helps readers to make decisions which meet performance requirements and to keep costs low
Download or read book Basics of Troubleshooting in Plastics Processing written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Basics of Troubleshooting in Plastics Processing is a condensed practical guide that gives the reader a broad introduction to properties of thermoplastics plastics, additives, the major processes (extrusion, injection molding, rotational molding, blow molding, and thermoforming), as well as troubleshooting. The main goal is to provide the plastics processor with an improved understanding of the basics by explaining the science behind the technology. Machine details are minimized as the emphasis is on processing problems and the defects in an effort to focus on basic root causes to problems and how to solve them. The book’s framework is troubleshooting in plastics processing because of the importance it has to the eventual production of high quality end products. Each chapter contains both practical and detailed technical information. This basic guide provides state-of-the-art information on: Processing problems and defects during manufacturing Plastics materials, their properties and characterization The plastics processing techniques Plastics additives Troubleshooting of the 5 main plastics processes References for further reading
Download or read book Polypropylene written by Clive Maier and published by William Andrew. This book was released on 1998-04-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene: The Definitive User's Guide and Databook presents in a single volume a panoramic and up-to-the-minute user's guide for today's most important thermoplastic. The book examines every aspectùscience, technology, engineering, properties, design, processing, applicationsùof the continuing development and use of polypropylene. The unique treatment means that specialists can not only find what they want but for the first time can relate to and understand the needs and requirements of others in the product development chain. The entire work is underpinned by very extensive collections of property data that allow the reader to put the information to real industrial and commercial use. Despite the preeminence and unrivaled versatility of polypropylene as a thermoplastic material to manufacture, relatively few books have been devoted to its study. Polypropylene: The Definitive User's Guide and Databook not only fills the gap but breaks new ground in doing so.Polypropylene is the most popular thermoplastic in use today, and still one of the fastest growing. Polypropylene: The Definitive User's Guide and Databook is the complete workbook and reference resource for all those who work with the material. Its comprehensive scope uniquely caters to polymer scientists, plastics engineers, processing technologists, product designers, machinery and mold makers, product managers, end users, researchers and students alike.
Download or read book Processing and Finishing of Polymeric Materials 2 Volume Set written by Wiley and published by John Wiley & Sons. This book was released on 2012-12-03 with total page 1477 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the processing and finishing of polymeric materials for scientists and practitioners Owing to their versatility and wide range of applications, polymeric materials are of great commercial importance. Manufacturing processes of commercial products are designed to meet the requirements of the final product and are influenced by the physical and chemical properties of the polymeric material used. Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, Processing and Finishing of Polymeric Materials provides comprehensive, up-to-date details on the latest manufacturing technologies, including blending, compounding, extrusion,molding, and coating. Written by prominent scholars from industry, academia, and research institutions from around the globe, this reference features more than forty selected reprints from the Encyclopedia as well as new contributions, providing unparalleled coverage of such topics as: Additives Antistatic agents Bleaching Blowing agents Calendaring Casting Coloring processes Dielectric heating Electrospinning Embedding Processing and Finishing of Polymeric Materials is an ideal resource for polymer and materials scientists, chemists, chemical engineers, materials scientists, process engineers, and consultants, and serves as a valuable addition to libraries of chemistry, chemical engineering, and materials science in industry, academia, and government.
