Download or read book Understanding the Morphology at Donor acceptor Interfaces in Organic Semiconductors written by Zixuan Guo and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic electronic devices, including organic photovoltaics (OPV), organic light-emitting diodes (OLEDs), and organic field-effect transistors (OFETs), have become increasingly important in consumer electronic applications due to the development of organic semiconductors, including organic small molecules, and conjugated polymers. They have advantages such as light weight, flexibility/stretchability, and the ability for roll-to-roll manufacturing. The structure and mechanism of organic devices are analogous to inorganic semiconductor devices, where donor materials (p-type) and acceptor materials (n-type) are used to create interfaces. To build high-performance organic electronic devices, it is essential to understand functionalities of organic heterojunction because they are building blocks of electronics. Organic heterojunction is interfaces created between donor and acceptor organic semiconductors. Exciting electronic action of devices occurs at organic interfaces. From a fundamental viewpoint, the role of interfaces must have optimal electronic and physical communication to yield highly efficient devices. From a technological viewpoint, one must understand, control, and have a rational design of the desired electronic and optical properties at organic interfaces for the development of different electronics and a host of potential new device concepts that have not yet been developed or realized. In this dissertation, we will use organic semiconductors for organic photovoltaics (OPV) as an example to investigat organic heterojunction interfaces, including interface fabrication, epitaxy, morphology control, and characterization, with the aim of building high-performance devices with good stability. We begin by discussing the growth of organic single-crystalline crystals with controlled orientations. Materials used are two small molecules: zinc phthalocyanine (ZnPc, p-type) and 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA, n-type). In this study, a self-built vertical physical vapor transport (v-PVT) chamber is used for crystallization, and a graphene-coated substrate is used to control molecular packing. Although ZnPc and PTCDA have a planar molecular shape and face-on packing motif on graphene, we find that they have different growth modes. Such growth mechanism difference can be explained by competition between intermolecular and molecule-graphene interactions. We then continue the abovementioned study by building model heterojunctions on graphene substrates using ZnPc and PTCDA. We discover that thermodynamics and kinetics of the system affect P-N junction morphology. We find that ZnPc and PTCDA form the "line-on-line" organic weak epitaxy at heterojunction interfaces from X-ray studies and crystallography refinement. We also verify that P-N junctions can generate electron-hole pairs. This work will advance the knowledge and create enabling opportunities to fabricate single-crystalline-oriented nanostructures. Besides using organic small molecules, we also explore the structure-property-performance relationship of conjugated block copolymers (BCPs) for OPV applications. In this work, a new donor-acceptor BCP is synthesized and added into polymer blend solar cells. We find that adding BCP could potentially retain the relative degree of crystallinity of [pi]-[pi] stacking regions, and decrease the detrimental interaction between donor polymer and electrode under thermal stress, thus improving the solar device's thermal stability by 30%. Finally, we explore the possibility of using graphene engineering for epitaxial growth dynamics control of organic small molecules. We determine that two distinct, alternating morphologies of ZnPc crystals are simultaneously observed on a single epitaxial SiC-graphene substrate. We hypothesize that the different morphologies arise from electronic structure and surface energy differences of underlying SiC-graphene regions ZnPc is grown on. The result will enable selective patterning of organic semiconductors for use in advanced warfare device applications. We hope these studies throughout this work will advance knowledge on fundamental crystallization mechanisms, interface engineering, morphology control, and characterization in organic crystalline systems. This work could further produce various future architectures for different applications in organic electronics.

Download or read book The Non Local Density of States of Electronic Excitations in Organic Semiconductors written by Carl. R Poelking and published by Springer. This book was released on 2017-10-24 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the microscopic understanding of the function of organic semiconductors. By tracing the link between their morphological structure and electronic properties across multiple scales, it represents an important advance in this direction. Organic semiconductors are materials at the interface between hard and soft matter: they combine structural variability, processibility and mechanical flexibility with the ability to efficiently transport charge and energy. This unique set of properties makes them a promising class of materials for electronic devices, including organic solar cells and light-emitting diodes. Understanding their function at the microscopic scale – the goal of this work – is a prerequisite for the rational design and optimization of the underlying materials. Based on new multiscale simulation protocols, the book studies the complex interplay between molecular architecture, supramolecular organization and electronic structure in order to reveal why some materials perform well – and why others do not. In particular, by examining the long-range effects that interrelate microscopic states and mesoscopic structure in these materials, the book provides qualitative and quantitative insights into e.g. the charge-generation process, which also serve as a basis for new optimization strategies.

Download or read book Examining and Controlling the Morphology of the Photoactive Layer of Organic Photovoltaic Devices written by Sameer Vajjala Kesava and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic devices such as solar cells, transistors and light-emitting diodes (LEDs) fabricated using organic semiconductors offer a potential feasible alternative to their inorganic counterparts due to several advantages such as ease of processing (ink-jet printing, roll-to-roll processing), flexibility and excellent control over the electronic properties through chemical modifications. Compared to the inorganic semiconductors, however, the performance of organic semiconductor-based electronic devices are much lower. For example, in the case of photovoltaic devices (solar cells), the power-conversion efficiencies are still lower (7%-10%) compared to that of inorganic solar cells (> 25%). The efficiency of a solar cell is determined, among other factors, to a significant extent by the morphology of the active layer, the thin film where photons are absorbed and charges generated. Even though significant improvement in the efficiencies have been achieved, mainly through band-gap engineering and processing optimization, a fundamental understanding of the structural and morphological effects of the active layer on the performance of organic photovoltaic devices remains obscured. In this work, the focus is on examining the structure-function relationships in solution-processed bulk-heterojunction organic photovoltaic devices and development of processing techniques for device optimization. A bulk-heterojunction device is formed by mixing of donor-acceptor semiconductors, and the subsequent structure formed in the active layer is dictated by the miscibility and crystallization of the components, which are functions of processing conditions. Excitons (electron-hole pairs bound by coulombic forces) formed in the donor semiconductor upon absorption of light have a diffusion length of around 5-10 nm before recombination occurs. Thus the structural length scales formed in the active layer determine the number of excitons that can dissociate into charges. We have examined the microstructure of poly(3-hexyl thiophene) (P3HT) donor and phenyl-C61-butyric acid methyl ester (PC61BM) acceptor mixture using grazing incidence small angle X-ray scattering (GISAXS) and energy-filtered transmission electron microscopy (EFTEM) to characterize the in-plane structural length scales for various processing conditions such as annealing temperatures and spin-casting solvents. Our results show that the structural length scales are driven by self-limiting P3HT crystallization upon thermal annealing, which correlate to the internal quantum efficiencies of the devices. In contrast, it has been reported in the case of poly[2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT)/ fullerene mixtures that thermal annealing results in crystallization of PBTTT with unconstrained lateral dimensions causing coarsening of the in-plane characteristic length scales. Thus the morphological evolution in polymer/fullerene solar cells, and consequently device performance, depends on the crystallization motif of the polymer. The microstructure resulting from mixing of donor-acceptor semiconductors can yield distinctive donor-acceptor interfaces that affect charge separation and recombination. Our studies utilizing a low band-gap poly[(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]germole)-2,6-diyl-alt-(2,1,3-benzothiadiazole)-4,7-diyl] (PGeBTBT) donor and PC71BM acceptor examine the effects of mixing on the charge generation in a device. Composition of mixed phases ascertained qualitatively and quantitatively using EFTEM and resonance soft X-ray scattering (RSOXS) show that the concentration of polymer in the mixed phase decreases as fullerene concentration in the mixture is increased. This resulted in a concomitant increase in the device performance. Similarly, photo-induced absorption studies carried out using ultrafast spectroscopy show increase in polaron concentration with increase in purity of the mixed phase. Grazing-incidence wide-angle X-ray scattering (GIWAXS) data show a change in fullerene aggregation with increase in fullerene concentration in the mixture. This indicates that adding polymer to the mixed phase results in dispersal of fullerene, and consequently, changing the local environment of the polymer affects formation of charge-transfer states and subsequent dissociation into individual charges. Thus, high interfacial area that is formed upon intimate mixing of polymer/fullerene, considered ideal for efficient exciton dissociation, counteracts through high charge recombination. Our results show that the composition of mixed phases affects charge separation at the interface consequently affecting device performance of organic photovoltaics. Another important aspect that has been shown to affect device performance of organic photovoltaics is the orientation of polymer crystals with respect to the substrate. For example, P3HT predominantly orients in an edge-on configuration, i.e., with the [pi]-[pi] bond stacking direction parallel to the substrate. It is hypothesized that out of plane [pi]-[pi] stacking, called face-on orientation, is important for effective charge transport. One way to achieve enhancement of face-on orientation is by directional crystallization which has been shown to be very effective for P3HT -- in this case, directional crystallization from solution. In this context, 'zone-annealing' is relevant as it has been employed to directionally crystallize polymers. In this work, we designed and developed the zone-annealing equipment, which can yield thermal gradients greater than 60°C/mm. Preliminary results from GIWAXS experiments on P3HT/PC61BM thin films show anisotropy in the structure and a moderate enhancement of face-on orientated P3HT crystallites. This technique was extended to organic field-effect transistors (OFET) to enhance charge mobilities through directional crystallization of organic semiconductors. In case of P3HT, the increment in charge mobilities was by a factor of 2 upon zone-annealing. However, in the case of organic small molecule semiconductor, 2,7-dioctyl[1]benzo- thieno[3,2-b][1] benzothiophene (C8-BTBT) , highly aligned crystalline domains were obtained -- a very promising result for fabricating high mobility OFETs. Thus, the zone-annealing technique provides a handle for controlling the morphology of organic thin film electronic devices.

Download or read book Donor acceptor Organic Semiconductors written by Jia Du and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic semiconductors have drawn remarkable attention due to their light weight, feasible fabrication and flexibility in the field of organic photovoltaics and field effect transistors. The rapidly increasing world population and the accompanied with huge energy demands are becoming a big concern for the future, which makes harvesting unlimited solar power using photovoltaic devices extremely important. A remarkable amount of research has been done to improve the power conversion efficiency in terms of the materials design, morphology investigations and device engineering. Organic field effect transistors utilizing solution-processed conjugated polymers can be fabricated efficiently at a low cost roll-to-roll technique over a large area. Designing high performing conjugated polymers and investigating their morphology is essential. In this dissertation, the fundamentals and the recent developments of organic semiconductors are covered in Chapter 1. The basic operation mechanism of organic photovoltaics and field effect transistors are introduced. Semiconducting molecules and polymers that have been reported using benzo[1,2-b;4,5-b’]dithiophene (BDT), benzo[1,2-b;4,5-b’]difuran (BDF), 2,1,3-benzothiadiazole (BT), and diketopyrrolopyrrole (DPP), are discussed and summarized. Chapter 2 describes the isomeric effect of two small molecules containing BDT and BT units on the photovoltaic performance. The influence on UV-vis absorption, frontier molecular orbital energy level, and morphology due to the position of the BT unit was systematically investigated. The photovoltaic performance was studied in bulk heterojunction solar cells with [6, 6]-phenyl-C71-butyric acid methyl ester used as the acceptor. Chapter 3 describes the synthesis of novel conjugated polymers built from BDF and furan substituted DPP unit. Furan and its derivatives are regarded as green and renewable building units. This polymer was tested in bulk heterojunction solar cells with the highest power conversion efficiency of 5.55% and high fill factor of 0.73 achieved when 4% diphenyl ether was applied to optimize the phase separation. The morphology of the blend films was investigated by atomic force microscopy, grazing incident wide-angle X-ray scattering and transmission electron microscopy. In Chapter 4, an alternative copolymer built from furan substituted DPP and (E)-1,2-di(furan-2-yl)ethene was synthesized by Stille coupling and employed in organic field effect transistors. Hole mobility of 0.42 cm2 V-1 s-1 was achieved with current on/off ratio of 104 after annealing the thin film at 150 oC for 5 minutes. The higher mobility after thermal annealing was explained by the increased crystallinity, which was revealed by atomic force microscopy and grazing incident X-ray diffraction. At the end, the prospective and future work for the organic photovoltaics and field effect transistors are discussed in Chapter 5.

Download or read book Organic Solar Cells written by Qiquan Qiao and published by CRC Press. This book was released on 2017-12-19 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current energy consumption mainly depends on fossil fuels that are limited and can cause environmental issues such as greenhouse gas emissions and global warming. These factors have stimulated the search for alternate, clean, and renewable energy sources. Solar cells are some of the most promising clean and readily available energy sources. Plus, the successful utilization of solar energy can help reduce the dependence on fossil fuels. Recently, organic solar cells have gained extensive attention as a next-generation photovoltaic technology due to their light weight, mechanical flexibility, and solution-based cost-effective processing. Organic Solar Cells: Materials, Devices, Interfaces, and Modeling provides an in-depth understanding of the current state of the art of organic solar cell technology. Encompassing the full spectrum of organic solar cell materials, modeling and simulation, and device physics and engineering, this comprehensive text: Discusses active layer, interfacial, and transparent electrode materials Explains how to relate synthesis parameters to morphology of the photoactive layer using molecular dynamics simulations Offers insight into coupling morphology and interfaces with charge transport in organic solar cells Explores photoexcited carrier dynamics, defect states, interface engineering, and nanophase separation Covers inorganic–organic hybrids, tandem structure, and graphene-based polymer solar cells Organic Solar Cells: Materials, Devices, Interfaces, and Modeling makes an ideal reference for scientists and engineers as well as researchers and students entering the field from broad disciplines including chemistry, material science and engineering, physics, nanotechnology, nanoscience, and electrical engineering.

Download or read book Introduction to Organic Semiconductor Heterojunctions written by Donghang Yan and published by John Wiley & Sons. This book was released on 2010-11-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that most important electronic devices use Schottky junctions and heterojunctions. Unfortunately there is not an advanced book introducing heterojunctions systematically. Introduction to Organic Semiconductor Heterojunctions fills the gap. In this book, the authors provide a comprehensive discussion and systematic introduction on the state-of-the-art technologies as well as application of organic semiconductor heterojunctions. First book to systematically introduce organic heterojunctions Arms readers with theoretical, experimental and applied aspects of organic heterojunctions The Chinese edition of the book is part of the Chinese Academy of Sciences’ Distinguished Young Scholar Scientific Book Series Introduction to Organic Semiconductor Heterojunctions is an ideal and valued reference for researchers and graduate students focusing on organic thin film devices like organic light-emitting diodes (OLEDs), organic photovoltaic (OPV) cells, and organic field-effect transistors (OFETs). Instructors can use the book as a supplementary text for a semiconductor physics or organic electronics course, giving students a better feel for the application of organic thin film devices.

Download or read book Electronic Processes in Organic Semiconductors written by Anna Köhler and published by John Wiley & Sons. This book was released on 2015-03-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first advanced textbook to provide a useful introduction in a brief, coherent and comprehensive way, with a focus on the fundamentals. After having read this book, students will be prepared to understand any of the many multi-authored books available in this field that discuss a particular aspect in more detail, and should also benefit from any of the textbooks in photochemistry or spectroscopy that concentrate on a particular mechanism. Based on a successful and well-proven lecture course given by one of the authors for many years, the book is clearly structured into four sections: electronic structure of organic semiconductors, charged and excited states in organic semiconductors, electronic and optical properties of organic semiconductors, and fundamentals of organic semiconductor devices.

Download or read book Organic Nanomaterials written by Tomas Torres and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a new generation of organic nanomaterials and their applications Recent developments in nanoscience and nanotechnology have given rise to a new generation of functional organic nanomaterials with controlled morphology and well-defined properties, which enable a broad range of useful applications. This book explores some of the most important of these organic nanomaterials, describing how they are synthesized and characterized. Moreover, the book explains how researchers have incorporated organic nanomaterials into devices for real-world applications. Featuring contributions from an international team of leading nanoscientists, Organic Nanomaterials is divided into five parts: Part One introduces the fundamentals of nanomaterials and self-assembled nanostructures Part Two examines carbon nanostructures from fullerenes to carbon nanotubes to graphene reporting on properties, theoretical studies, and applications Part Three investigates key aspects of some inorganic materials, self-assembled monolayers, organic field effect transistors, and molecular self-assembly at solid surfaces Part Four explores topics that involve both biological aspects and nanomaterials such as biofunctionalized surfaces Part Five offers detailed examples of how organic nanomaterials enhance sensors and molecular photovoltaics Most of the chapters end with a summary highlighting the key points. References at the end of each chapter guide readers to the growing body of original research reports and reviews in the field. Reflecting the interdisciplinary nature of organic nanomaterials, this book is recommended for researchers in chemistry, physics, materials science, polymer science, and chemical and materials engineering. All readers will learn the principles of synthesizing and characterizing new organic nanomaterials in order to support a broad range of exciting new applications.

Download or read book Functional Metal Oxides written by Satishchandra Balkrishna Ogale and published by John Wiley & Sons. This book was released on 2013-11-08 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional oxides are used both as insulators and metallic conductors in key applications across all industrial sectors. This makes them attractive candidates in modern technology ? they make solar cells cheaper, computers more efficient and medical instrumentation more sensitive. Based on recent research, experts in the field describe novel materials, their properties and applications for energy systems, semiconductors, electronics, catalysts and thin films. This monograph is divided into 6 parts which allows the reader to find their topic of interest quickly and efficiently. * Magnetic Oxides * Dopants, Defects and Ferromagnetism in Metal Oxides * Ferroelectrics * Multiferroics * Interfaces and Magnetism * Devices and Applications This book is a valuable asset to materials scientists, solid state chemists, solid state physicists, as well as engineers in the electric and automotive industries.

Download or read book Optoelectronic Organic Inorganic Semiconductor Heterojunctions written by Ye Zhou and published by CRC Press. This book was released on 2021-01-19 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optoelectronic Organic-Inorganic Semiconductor Heterojunctions summarizes advances in the development of organic-inorganic semiconductor heterojunctions, points out challenges and possible solutions for material/device design, and evaluates prospects for commercial applications. Introduces the concept and basic mechanism of semiconductor heterojunctions Describes a series of organic-inorganic semiconductor heterojunctions with desirable electrical and optical properties for optoelectronic devices Discusses typical devices such as solar cells, photo-detectors, and optoelectronic memories Outlines the materials and device challenges as well as possible strategies to promote the commercial translation of semiconductor heterojunctions-based optoelectronic devices Aimed at graduate students and researchers working in solid-state materials and electronics, this book offers a comprehensive yet accessible view of the state of the art and future directions.

Download or read book Supramolecular Materials for Opto Electronics written by Norbert Koch and published by Royal Society of Chemistry. This book was released on 2015 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: For years, concepts and models relevant to the fields of molecular electronics and organic electronics have been invented in parallel, slowing down progress in the field. This book illustrates how synthetic chemists, materials scientists, physicists, and device engineers can work together to reach their desired, shared goals, and provides the knowledge and intellectual basis for this venture. Supramolecular Materials for Opto-Electronics covers the basic principles of building supramolecular organic systems that fulfil the requirements of the targeted opto-electronic function; specific material properties based on the fundamental synthesis and assembly processes; and provides an overview of the current uses of supramolecular materials in opto-electronic devices. To conclude, a "what's next" section provides an outlook on the future of the field, outlining the ways overarching work between research disciplines can be utilised. Postgraduate researchers and academics will appreciate the fundamental insight into concepts and practices of supramolecular systems for opto-electronic device integration.

Download or read book Printed Electronics written by Zheng Cui and published by John Wiley & Sons. This book was released on 2016-04-12 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the newly emerged and highly interdisciplinary field of printed electronics • Provides an overview of the latest developments and research results in the field of printed electronics • Topics addressed include: organic printable electronic materials, inorganic printable electronic materials, printing processes and equipments for electronic manufacturing, printable transistors, printable photovoltaic devices, printable lighting and display, encapsulation and packaging of printed electronic devices, and applications of printed electronics • Discusses the principles of the above topics, with support of examples and graphic illustrations • Serves both as an advanced introductory to the topic and as an aid for professional development into the new field • Includes end of chapter references and links to further reading

Download or read book Advanced Micro and Nanomaterials for Photovoltaics written by and published by Elsevier. This book was released on 2019-05-25 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials are becoming increasingly important photovoltaic technologies from absorbers to contacts. This book is dedicated to describing the novel materials and technologies for photovoltaics that derive from these new and novel approaches in solar technologies. We have collected a set of renowned experts in their respective fields as authors and their expertise covers a broad set of areas including novel oxides, quantum dots, CZTS and organic solar cells, as well as light management and reliability testing. The organization of the book is divided into three sections; the first part deals with emerging photovoltaic absorbers and absorber approaches, the second part is focused on novel solar cell architectures and device concepts and components; and the last part is focused on their integration into module technologies. The first chapter is an introduction to the basics of solar cells technology facilitating an understanding by the non-expert of the following chapters. The book is intended for academics and professionals, at the research and R&D level in materials and devices, who are looking for opportunities for applications in the solar materials, devices and modules areas. Hopefully it will serve as a reference for students and professionals looking into the potential and development of novel photovoltaic technologies, researchers looking into the development of innovative projects, and teachers in the field of energy and sustainability. Showcases a range of cutting-edge photovoltaic materials and devices, exploring their special properties and how they are best used Assesses the challenges of fabricating solar cell devices using nanotechnology Explores how producing cheaper modules, increasing reliability and increasing efficiency have led to new applications for photovoltaic devices

Download or read book Elementary Processes in Organic Photovoltaics written by Karl Leo and published by Springer. This book was released on 2016-12-20 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the results of a multi-year research programme funded by the Deutsche Forschungsgemeinschaft (German Research Council), which explains how organic solar cells work. In this new promising photovoltaic technology, carbon-based materials are deposited by low-cost methods onto flexible substrates, thus allowing devices which open completely new applications like transparent coatings for building, solar cells integrated into clothing or packages, and many more. The investigation of organic solar cells is an interdisciplinary topic, covering physics, chemistry and engineering. The different chapters address topics ranging from the synthesis of new organic materials, to the characterization of the elementary processes such as exciton transport and separation, and the principles of highly efficient device design. /div

Download or read book Organic Solar Cells written by Liming Ding and published by John Wiley & Sons. This book was released on 2022-02-09 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Solar Cells A timely and singular resource on the latest advances in organic photovoltaics Organic photovoltaics are gaining widespread attention due to their solution processability, tunable electronic properties, low temperature manufacture, and cheap and light materials. Their wide range of potential applications may result in significant near-term commercialization of the technology. In Organic Solar Cells: Materials Design, Technology and Commercialization, renowned scientist Dr. Liming Ding delivers a comprehensive exploration of organic solar cells, including discussions of their key materials, mechanisms, molecular designs, stability features, and applications. The book presents the most state-of-the-art developments in the field alongside fulsome treatments of the commercialization potential of various organic solar cell technologies. The author also provides: Thorough introductions to fullerene acceptors, polymer donors, and non-fullerene small molecule acceptors Comprehensive explorations of p-type molecular photovoltaic materials and polymer-polymer solar cell materials, devices, and stability Practical discussions of electron donating ladder-type heteroacenes for photovoltaic applications In-depth examinations of chlorinated organic and single-component organic solar cells, as well as the morphological characterization and manipulation of organic solar cells Perfect for materials scientists, organic and solid-state chemists, and solid-state physicists, Organic Solar Cells: Materials Design, Technology and Commercialization will also earn a place in the libraries of surface chemists and physicists and electrical engineers.

Download or read book Unconventional Thin Film Photovoltaics written by Enrico Da Como and published by Royal Society of Chemistry. This book was released on 2016-08-04 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both organic materials, where recent advances in the understanding of device physics is driving progress, and the newly emerging field of mixed halide perovskites, which are challenging the efficiencies of conventional thin film PV cells, this book provides a balanced overview of the experimental and theoretical aspects of these two classes of solar cell. The book explores both the experimental and theoretical aspects of these solar cell classes. Emphasis is placed on understanding the fundamental physics of the devices. The book also discusses modelling over many length scales, from nano to macro. The first book to cover perovskites, this is an important reference for industrialists and researchers working in energy technologies and materials.

Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions