Download or read book Understanding the Growth of Dilute Nitrides from First Principles written by Hazem Abu Farsakh and published by Sudwestdeutscher Verlag Fur Hochschulschriften AG. This book was released on 2010-12 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the large band-gap bowing associated with low N contents in III-V semiconductors, ternary and quaternary dilute nitride alloys have sparked interest over the last years for a wide range of technological applications. However, the realization of these alloys has been hampered by several challenges such as the extremely low equilibrium solubility of N and composition fluctuations. In order to overcome these challenges a detailed understanding of the growth of these alloys at the atomic level is crucial. Therefore, by employing state-of-the art first-principles calculations, this work provides (i) a detailed study of the thermodynamic N solubility limits at technologically relevant GaAs and InAs surfaces/subsurfaces as function of growth conditions, and (ii) the kinetic mechanisms for N adatoms that affect and control their incorporation, such as adatom diffusion and surface/subsurface substitution. A detailed analysis of the interplay between thermodynamics and kinetics allowed to predict the optimum conditions for N incorporation and to explain experimental results. This study provides a prototype for understanding the growth highly mismatched multi-component alloys.
Download or read book Physics and Applications of Dilute Nitrides written by I. Buyanova and published by CRC Press. This book was released on 2004-08-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their development in the 1990s, it has been discovered that diluted nitrides have intriguing properties that are not only distinct from those of conventional semiconductor materials, but also are conducive to various applications in optoelectronics and photonics. The book examines these applications and presents a broad and in-depth look at t
Download or read book Physics and Applications of Dilute Nitrides written by Irina A. Buyanova and published by CRC Press. This book was released on 2020-06-30 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their development in the 1990s, it has been discovered that diluted nitrides have intriguing properties that are not only distinct from those of conventional semiconductor materials, but also are conducive to various applications in optoelectronics and photonics. The book examines these applications and presents a broad and in-depth look at the basic electronic and optical properties of diluted nitrides. The aim of Physics and Applications of Diluted Nitrides is to provide graduate students, researchers and engineers with a comprehensive overview of the present knowledge and future perspectives of diluted nitrides. Co-authored by a group of leading scientists in the field, this book brings the reader up to speed on the development and current state of diluted nitride applications, as well as the technologies to be developed in the near future.
Download or read book Nitrides and Dilute Nitrides written by Javier Miguel-Sánchez and published by . This book was released on 2007-01-01 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early developments of the last century, a lot of investigations and works have been devoted to the study of the science and technology of semiconductors. Although silicon and germanium were the pioneering semiconductors, in the last years, the so called III-V semiconductors [(B,Al,Ga,In)(P,As,Sb)] attracted a lot of attention for their interesting properties (high mobility, direct transitions, ...) which yielded to the successful development of high speed electronic devices and light emitting and laser diodes. Current telecom applications are mainly based in these semiconductor devices (mobile phones, VCSELs in fibre optic applications, etc.). But in the last decades, the incorporation of the small and highly electronegative nitrogen atom in the 'old' III-V semiconductors has opened a new and interesting field in semiconductor physics and applications: Nitrides (III-N) and dilute nitrides (III-V-N) are nowadays the main candidates for the development of devices with improved characteristics: laser diodes in the wavelengths of interest for telecom applications, in the visible and UV range, high electron mobility transistors, white LED for automotive, home and airplane illumination with much lower heat dissipation than bulb-based illumination, high temperature applications, ... This book is devoted to a detailed compilation of comprehensive reviews of the main topics under investigation in the field of nitride and dilute nitrides, written by the pioneers and researchers from the leading research labs from all over the world, describing the properties of these semiconductors: From the ab initio theory to the growth (MOCVD, MBE) and characterization (magnetic, electric, structural) of the materials and the devices.
Download or read book Dilute III V Nitride Semiconductors and Material Systems written by Ayse Erol and published by Springer Science & Business Media. This book was released on 2008-01-12 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current status of research and development in dilute III-V nitrides. It covers major developments in this new class of materials within 24 chapters from prominent research groups. The book integrates materials science and applications in optics and electronics in a unique way. It is valuable both as a reference work for researchers and as a study text for graduate students.
Download or read book Bismuth Containing Alloys and Nanostructures written by Shumin Wang and published by Springer. This book was released on 2019-07-03 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on novel bismuth-containing alloys and nanostructures, covering a wide range of materials from semiconductors, topological insulators, silica optical fibers and to multiferroic materials. It provides a timely overview of bismuth alloys and nanostructures, from material synthesis and physical properties to device applications and also includes the latest research findings. Bismuth is considered to be a sustainable and environmentally friendly element, and has received increasing attention in a variety of innovative research areas in recent years. The book is intended as a reference resource and textbook for graduate students and researchers working in these fields.
Download or read book Molecular Beam Epitaxy written by Mohamed Henini and published by Elsevier. This book was released on 2018-06-27 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular Beam Epitaxy (MBE): From Research to Mass Production, Second Edition, provides a comprehensive overview of the latest MBE research and applications in epitaxial growth, along with a detailed discussion and ‘how to’ on processing molecular or atomic beams that occur on the surface of a heated crystalline substrate in a vacuum. The techniques addressed in the book can be deployed wherever precise thin-film devices with enhanced and unique properties for computing, optics or photonics are required. It includes new semiconductor materials, new device structures that are commercially available, and many that are at the advanced research stage. This second edition covers the advances made by MBE, both in research and in the mass production of electronic and optoelectronic devices. Enhancements include new chapters on MBE growth of 2D materials, Si-Ge materials, AIN and GaN materials, and hybrid ferromagnet and semiconductor structures. Condenses the fundamental science of MBE into a modern reference, speeding up literature review Discusses new materials, novel applications and new device structures, grounding current commercial applications with modern understanding in industry and research Includes coverage of MBE as mass production epitaxial technology and how it enhances processing efficiency and throughput for the semiconductor industry and nanostructured semiconductor materials research community
Download or read book Handbook of Optoelectronic Device Modeling and Simulation written by Joachim Piprek and published by CRC Press. This book was released on 2017-10-10 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Provides a comprehensive survey of fundamental concepts and methods for optoelectronic device modeling and simulation. • Gives a broad overview of concepts with concise explanations illustrated by real results. • Compares different levels of modeling, from simple analytical models to complex numerical models. • Discusses practical methods of model validation. • Includes an overview of numerical techniques.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Nitride Semiconductors and Devices Materials Properties Physics and Growth written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2009-07-30 with total page 1311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes of this handbook treat the fundamentals, technology and nanotechnology of nitride semiconductors with an extraordinary clarity and depth. They present all the necessary basics of semiconductor and device physics and engineering together with an extensive reference section. Volume 1 deals with the properties and growth of GaN. The deposition methods considered are: hydride VPE, organometallic CVD, MBE, and liquid/high pressure growth. Additionally, extended defects and their electrical nature, point defects, and doping are reviewed.
Download or read book Rare Earth and Transition Metal Doping of Semiconductor Materials written by Volkmar Dierolf and published by Woodhead Publishing. This book was released on 2016-01-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare Earth and Transition Metal Doping of Semiconductor Material explores traditional semiconductor devices that are based on control of the electron’s electric charge. This book looks at the semiconductor materials used for spintronics applications, in particular focusing on wide band-gap semiconductors doped with transition metals and rare earths. These materials are of particular commercial interest because their spin can be controlled at room temperature, a clear opposition to the most previous research on Gallium Arsenide, which allowed for control of spins at supercold temperatures. Part One of the book explains the theory of magnetism in semiconductors, while Part Two covers the growth of semiconductors for spintronics. Finally, Part Three looks at the characterization and properties of semiconductors for spintronics, with Part Four exploring the devices and the future direction of spintronics. Examines materials which are of commercial interest for producing smaller, faster, and more power-efficient computers and other devices Analyzes the theory behind magnetism in semiconductors and the growth of semiconductors for spintronics Details the properties of semiconductors for spintronics
Download or read book Advanced Semiconducting Materials and Devices written by K.M. Gupta and published by Springer. This book was released on 2015-08-20 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments in semiconducting materials and devices, providing up-to-date information on the science, processes, and applications in the field. A wide range of topics are covered, including optoelectronic devices, metal–semiconductor junctions, heterojunctions, MISFETs, LEDs, semiconductor lasers, photodiodes, switching diodes, tunnel diodes, Gunn diodes, solar cells, varactor diodes, IMPATT diodes, and advanced semiconductors. Detailed attention is paid to advanced and futuristic materials. In addition, clear explanations are provided of, for example, electron theories, high-field effects, the Hall effect, transit-time effects, drift and diffusion, breakdown mechanisms, equilibrium and transient conditions, switching, and biasing. The book is designed to meet the needs of undergraduate engineering students and will also be very useful for postgraduate students; it will assist in preparation for examinations at colleges and universities and for other examinations in engineering. Practice questions are therefore presented in both essay and multiple choice format, and many solved examples and unsolved problems are included.
Download or read book Diffusion and Defect Data written by and published by . This book was released on 2004 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Compound Semiconductor Nanowires written by Fumitaro Ishikawa and published by CRC Press. This book was released on 2017-10-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: One dimensional electronic materials are expected to be key components owing to their potential applications in nanoscale electronics, optics, energy storage, and biology. Besides, compound semiconductors have been greatly developed as epitaxial growth crystal materials. Molecular beam and metalorganic vapor phase epitaxy approaches are representative techniques achieving 0D–2D quantum well, wire, and dot semiconductor III-V heterostructures with precise structural accuracy with atomic resolution. Based on the background of those epitaxial techniques, high-quality, single-crystalline III-V heterostructures have been achieved. III-V Nanowires have been proposed for the next generation of nanoscale optical and electrical devices such as nanowire light emitting diodes, lasers, photovoltaics, and transistors. Key issues for the realization of those devices involve the superior mobility and optical properties of III-V materials (i.e., nitride-, phosphide-, and arsenide-related heterostructure systems). Further, the developed epitaxial growth technique enables electronic carrier control through the formation of quantum structures and precise doping, which can be introduced into the nanowire system. The growth can extend the functions of the material systems through the introduction of elements with large miscibility gap, or, alternatively, by the formation of hybrid heterostructures between semiconductors and another material systems. This book reviews recent progresses of such novel III-V semiconductor nanowires, covering a wide range of aspects from the epitaxial growth to the device applications. Prospects of such advanced 1D structures for nanoscience and nanotechnology are also discussed.
Download or read book Functional Nanostructures written by Sudipta Seal and published by Springer Science & Business Media. This book was released on 2010-06-02 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book about functional nanostructures. Nanocrystalline materials exhibit outstanding properties and represent a new class of structural materials having a wide range of applications. In particular, there is considerable interest in developing nanocrystalline materials to be used as functional materials in aerospace applications, automotive industry, wear applications, etc. Future progress in these high technological applications of nanocrystalline materials depends on development of new methods of their fabrication and understanding of the underlying nano-scale and interface effects causing their unique mechanical properties.
Download or read book GaN and Related Materials II written by Stephen J. Pearton and published by CRC Press. This book was released on 2000-10-31 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first GaN and Related Materials covered topics such as a historical survey of past research, optical electrical and microstructural characterization, theory of defects, bulk crystal growth, and performance of electronic and photonic devices. This new volume updates old research where warranted and explores new areas such as UV detectors, microwave electronics, and Er-doping. This unique follow-up features contributions from leading experts that cover the full spectrum of growth.
Download or read book Ternary Alloys Based on III V Semiconductors written by Vasyl Tomashyk and published by CRC Press. This book was released on 2017-09-29 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors have attracted considerable attention due to their applications in the fabrication of electronic and optoelectronic devices as light-emitting diodes and solar cells. Because of their wide applications in a variety of devices, the search for new semiconductor materials and the improvement of existing materials is an important field of study. This new book covers all known information about phase relations in ternary systems based on III-V semiconductors. This book will be of interest to undergraduate and graduate students studying materials science, solid state chemistry, and engineering. It will also be relevant for researchers at industrial and national laboratories, in addition to phase diagram researchers, inorganic chemists, and solid state physicists.