Download or read book Understanding Impact induced Fatigue Failure written by Brad Lee Boyce and published by . This book was released on 2001 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.
Download or read book Fracture Fatigue Failure and Damage Evolution Volume 8 written by Allison M. Beese and published by Springer. This book was released on 2015-11-07 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture, Fatigue, Failure and Damage Evolution, Volume 8 represents the eighth of nine volumes of technical papers presented at the Society for Experimental Mechanics (SEM) 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Challenges in Mechanics of Time Dependent Materials, Advancement of Optical Methods in Experimental Mechanics, Experimental and Applied Mechanics, 16th International Symposium on MEMS and Nanotechnology, International Symposium on the Mechanics of Composite and Multi-functional Materials, 5th International Symposium on the Mechanics of Biological Systems and Materials, International Symposium on the Mechanics of Composite and Multi-functional Materials; and Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems.
Download or read book Commercial Motor Vehicle Driver Fatigue Long Term Health and Highway Safety written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-09-12 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are approximately 4,000 fatalities in crashes involving trucks and buses in the United States each year. Though estimates are wide-ranging, possibly 10 to 20 percent of these crashes might have involved fatigued drivers. The stresses associated with their particular jobs (irregular schedules, etc.) and the lifestyle that many truck and bus drivers lead, puts them at substantial risk for insufficient sleep and for developing short- and long-term health problems. Commercial Motor Vehicle Driver Fatigue, Long-Term Health and Highway Safety assesses the state of knowledge about the relationship of such factors as hours of driving, hours on duty, and periods of rest to the fatigue experienced by truck and bus drivers while driving and the implications for the safe operation of their vehicles. This report evaluates the relationship of these factors to drivers' health over the longer term, and identifies improvements in data and research methods that can lead to better understanding in both areas.
Download or read book Fatigue Failure and Fracture Mechanics written by Dariusz Skibicki and published by Trans Tech Publications Ltd. This book was released on 2012-08-20 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Conference on XXIV Symposium on Fatigue Failure and Fracture Mechanics, May 22-25, 2012, Bydgoszcz-Pieczyska, Poland
Download or read book Fatigue of Structures and Materials written by Jaap Schijve and published by Springer Science & Business Media. This book was released on 2001-06-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily a textbook written for engineers, students and teachers, and for people working on fatigue problems of engineering structures and materials. The book can be used for graduate and undergraduate courses, workshops, and short courses for people working in the industry or research institutes. The book also offers useful comments for researchers in view of the practical relevance of investigations and to plan future research. An important theme of the book is the understanding of what happens in the material of an engineering structure subjected to a spectrum of cyclic loads in service. Knowledge of the fatigue mechanism in the material and how it can be affected by a large variety of practical conditions is essential for dealing with fatigue problems. The structure must be designed for durability, and thus against fatigue. This includes not only the overall concept of the structure and safety and economic aspects, but also questions on detail design, joints, production and material surface quality. The designer must predict the fatigue performance of the structure. Knowledge of the various influencing factors is essential. Similar considerations arise if fatigue problems occur after a period in service when decisions have to be made on remedial actions. A unique feature of the book is the integrated approach to fatigue of engineering structures as outlined in the picture on the front cover of the book.
Download or read book Fatigue of Materials written by Raghavan Srinivasan and published by John Wiley & Sons. This book was released on 2010-11-11 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of Materials covers a broad spectrum of topics that represent the truly diverse nature of the subject that has grown to become a key area of scientific and applied research. Constituting an international forum for the materials industry, the book provides the perspectives of operators, engineers, and researchers regarding all aspects of current and emerging technologies for materials.
Download or read book Fracture Fatigue Failure and Damage Evolution Volume 3 written by Shuman Xia and published by Springer Nature. This book was released on 2021-03-26 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture, Fatigue, Failure and Damage Evolution, Volume 3 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of seven from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Novel Experimental Methods Extreme Environments Interfacial Fracture Integration of Models & Experiments Mechanics of Energy & Energetic Materials Integration of Models & Experiments In Situ Techniques for Fatigue & Fracture Microscale & Microstructural Effects on Mechanical Behavior
Download or read book Fatigue Damage Crack Growth and Life Prediction written by F. Ellyin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failure is a multi-stage process. It begins with the initiation of cracks, and with continued cyclic loading the cracks propagate, finally leading to the rupture of a component or specimen. The demarcation between the above stages is not well-defined. Depending upon the scale of interest, the variation may span three orders of magnitude. For example, to a material scientist an initiated crack may be of the order of a micron, whereas for an engineer it can be of the order of a millimetre. It is not surprising therefore to see that investigation of the fatigue process has followed different paths depending upon the scale of phenomenon under investigation. Interest in the study of fatigue failure increased with the advent of industrial ization. Because of the urgent need to design against fatigue failure, early investiga tors focused on prototype testing and proposed failure criteria similar to design formulae. Thus, a methodology developed whereby the fatigue theories were proposed based on experimental observations, albeit at times with limited scope. This type of phenomenological approach progressed rapidly during the past four decades as closed-loop testing machines became available.
Download or read book Metal Fatigue Analysis Handbook written by Yung-Li Lee and published by Elsevier. This book was released on 2011-08-17 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand why fatigue happens and how to model, simulate, design and test for it with this practical, industry-focused reference Written to bridge the technology gap between academia and industry, the Metal Fatigue Analysis Handbook presents state-of-the-art fatigue theories and technologies alongside more commonly used practices, with working examples included to provide an informative, practical, complete toolkit of fatigue analysis. Prepared by an expert team with extensive industrial, research and professorial experience, the book will help you to understand: Critical factors that cause and affect fatigue in the materials and structures relating to your work Load and stress analysis in addition to fatigue damage-the latter being the sole focus of many books on the topic How to design with fatigue in mind to meet durability requirements How to model, simulate and test with different materials in different fatigue scenarios The importance and limitations of different models for cost effective and efficient testing Whilst the book focuses on theories commonly used in the automotive industry, it is also an ideal resource for engineers and analysts in other disciplines such as aerospace engineering, civil engineering, offshore engineering, and industrial engineering. The only book on the market to address state-of-the-art technologies in load, stress and fatigue damage analyses and their application to engineering design for durability Intended to bridge the technology gap between academia and industry - written by an expert team with extensive industrial, research and professorial experience in fatigue analysis and testing An advanced mechanical engineering design handbook focused on the needs of professional engineers within automotive, aerospace and related industrial disciplines
Download or read book Structural Integrity and Fatigue Failure Analysis written by Grzegorz Lesiuk and published by Springer Nature. This book was released on 2022-05-04 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains full papers presented at the First Virtual Conference on Mechanical Fatigue (VCMF 2020), which was organised by the University of Porto (FEUP, Portugal), the Wroclaw University of Science and Technology (Poland), University of Electronic Science and Technology of China (China), Siberian Federal University (Russia), and the ESIS/TC12 Technical Committee (European Structural Integrity Society–ESIS), between 9 and 11 of September 2020. This conference was intended to be a forum of discussion of new research concepts, equipment, technology, materials and structures and other scientific advances within the field of mechanical fatigue and fracture. The first edition of the VCMF 2020 event has reached more than 60 participants from more than 20 nationalities demonstrating the vitality of this new event.
Download or read book Fatigue of Metals written by P. G. Forrest and published by Elsevier. This book was released on 2013-10-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of Metals provides a general account of the failure of metals due to fatigue, a subject of great practical importance in the field of engineering and metallurgy. The book covers a wide range of topics on the study of the fatigue of metals. The text presents in the first three chapters the characteristics and detection of fatigue fractures; methods of fatigue testing; and the fatigue strengths of different materials. The resistance of materials to fatigue under complex stress; the determination and effects of stress concentration; influence of surface treatment on fatigue strength; and effects of corrosion and temperature are also studied in detail. In relation to the previous chapters of fatigue information, a chapter is devoted to engineering design to prevent fatigue. The last two chapters provide a brief historical survey of the developments of the study of the mechanism of fatigue and fatigue of non-metallic materials such as wood, plastic, rubber, glass, and concrete. Mechanical engineers, designers, metallurgists, researchers, and students will find the book as a good reference material.
Download or read book Metal Fatigue written by Norman Edward Frost and published by Courier Corporation. This book was released on 1999-01-01 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Definitive, clearly written, and well-illustrated volume addresses all aspects of the subject, from the historical development of understanding metal fatigue to vital concepts of the cyclic stress that causes a crack to grow. Examines effect of stress concentrations on notches, theories of fatigue crack propagation, and many other topics. Seven appendixes describe laboratory fatigue testing, stress concentrations, material stress-strain relationships, and more. Invaluable text for students of engineering design and metallurgy.
Download or read book Fatigue Testing and Analysis written by Yung-Li Lee and published by Elsevier. This book was released on 2011-04-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis: Theory and Practice presents the latest, proven techniques for fatigue data acquisition, data analysis, and test planning and practice. More specifically, it covers the most comprehensive methods to capture the component load, to characterize the scatter of product fatigue resistance and loading, to perform the fatigue damage assessment of a product, and to develop an accelerated life test plan for reliability target demonstration. This book is most useful for test and design engineers in the ground vehicle industry. Fatigue Testing and Analysis introduces the methods to account for variability of loads and statistical fatigue properties that are useful for further probabilistic fatigue analysis. The text incorporates and demonstrates approaches that account for randomness of loading and materials, and covers the applications and demonstrations of both linear and double-linear damage rules. The reader will benefit from summaries of load transducer designs and data acquisition techniques, applications of both linear and non-linear damage rules and methods, and techniques to determine the statistical fatigue properties for the nominal stress-life and the local strain-life methods. - Covers the useful techniques for component load measurement and data acquisition, fatigue properties determination, fatigue analysis, and accelerated life test criteria development, and, most importantly, test plans for reliability demonstrations - Written from a practical point of view, based on the authors' industrial and academic experience in automotive engineering design - Extensive practical examples are used to illustrate the main concepts in all chapters
Download or read book Fatigue of Materials II written by T.S. Srivatsan and published by Springer. This book was released on 2016-12-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this collection cover a diverse range of topics on the topic of fatigue of materials. The editors have grouped the papers into five sections. Sections 1 and 2 contain papers that (i) review the current state of knowledge both related and relevant to the subject of fatigue behavior of materials, and (ii) present new, innovative, and emerging techniques for experimental evaluation of the fatigue behavior. Sections 3 and 4 focus on advanced materials that are used in performance-critical applications in the aerospace and automotive industries, such as the alloys of titanium, nickel, aluminum, and magnesium. Section 5 presents papers relating to other materials of engineering interest, such as iron and steel, polymer, rubber, and composites.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Academic Press. This book was released on 2019-06-15 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers looking at factors that cause metals to fail through stress, corrosion, or other processes. Predicting the influence of small defects and non-metallic inclusions on fatigue with any degree of accuracy is a particularly complex part of this. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions is the most trusted, detailed and comprehensive guide to this subject available. This expanded second edition introduces highly important emerging topics on metal fatigue, pointing the way for further research and innovation. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book. - Demonstrates how to solve a wide range of specialized metal fatigue problems relating to small defects and non-metallic inclusions. - Provides a detailed introduction to fatigue mechanisms and stress concentration. - This edition is expanded to address even more topics, including low cycle fatigue, quality control of fatigue components, and more.
Download or read book The Psychology of Fatigue written by Robert Hockey and published by Cambridge University Press. This book was released on 2013-05-16 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue can have a major impact on an individual's performance and well-being, yet is poorly understood, even within the scientific community. There is no developed theory of its origins or functions, and different types of fatigue (mental, physical, sleepiness) are routinely confused. The widespread interpretation of fatigue as a negative consequence of work may be true only for externally imposed goals; meaningful or self-initiated work is rarely tiring and often invigorating. In the first book dedicated to the systematic treatment of fatigue for over sixty years, Robert Hockey examines its many aspects - social history, neuroscience, energetics, exercise physiology, sleep and clinical implications - and develops a new motivational control theory, in which fatigue is treated as an emotion having a fundamental adaptive role in the management of goals. He then uses this new perspective to explore the role of fatigue in relation to individual motivation, working life and well-being.
