Download or read book Understanding and Applying Machine Vision Revised and Expanded written by Nello Zeuch and published by CRC Press. This book was released on 2000-01-03 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of applications of machine vision technology in the semiconductor, electronic, automotive, wood, food, pharmaceutical, printing, and container industries. It describes systems that enable projects to move forward swiftly and efficiently, and focuses on the nuances of the engineering and system integration of machine vision technology.
Download or read book Understanding and Applying Machine Vision Second Edition Revised and Expanded written by Nello Zeuch and published by CRC Press. This book was released on 2000-01-03 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of applications of machine vision technology in the semiconductor, electronic, automotive, wood, food, pharmaceutical, printing, and container industries. It describes systems that enable projects to move forward swiftly and efficiently, and focuses on the nuances of the engineering and system integration of machine vision technology.
Download or read book Machine Vision written by Nello Zuech and published by . This book was released on 1989 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Vision written by Richard K. Miller and published by Springer Science & Business Media. This book was released on 1989-08-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at manufacturing managers and engineers looking for an introduction to computer vision and its potential, this book discusses the areas in which machine vision is being used, explains different types of machine vision hardware and software and summarizes research at several universities.
Download or read book Product Design for Manufacture and Assembly Second Edition Revised and Expanded written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2002 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing more than 300 equations and the extensive data, necessary to estimate manufacturing and assembly cost during product design, benchmarking, and should cost analysis, this textbook gives students modern and effective tools for analysing injection moulding, sheet metalworking, die casting, powder metal processing costs, sand and investment casting, and hot forging. It includes discussions of the influence of the application of design for manufacture and assembly, material selection and economic ranking of processes, the effect of reduced assembly difficulties on product quality, the links between computer-aided design solid models and design analysis tools, and more.
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Handbook of Induction Heating written by Valery Rudnev and published by CRC Press. This book was released on 2002-12-17 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering ready-to-use tables, diagrams, graphs, and simplified formulas for at-a-glance guidance in induction heating system design, this book contains numerous photographs, magnetic field plots, temperature profiles, case studies, hands-on guidelines, and practical recommendations to navigate through various system designs and avoid surprises in installation, operation, and maintenance. It covers basic principles, modern design concepts, and advanced techniques engineers use to model and evaluate the different types of manufacturing processes based on heating by induction. The handbook explains the electromagnetic and heat transfer phenomena that take place during induction heating.
Download or read book Integrated Product Design and Manufacturing Using Geometric Dimensioning and Tolerancing written by Bob Campbell and published by CRC Press. This book was released on 2002-09-13 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the preparation and application of design layout analyses with concurrent engineering teams in six steps that capture design intent and add value to design process. It offers tools for eliminating costly trial-and-error approaches and deliver economically viable products. The authors discuss product design techniques that allevi
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
Download or read book Re Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.
Download or read book Metallurgical Design of Flat Rolled Steels written by Vladimir B. Ginzburg and published by CRC Press. This book was released on 2020-11-25 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the basic principles of metallurgical design of flat rolled steels to obtain flat steel products with required metallurgical and mechanical properties. These principles establish the requirements for steel chemical composition and the process parameters, including steelmaking, reheating, hot rolling, annealing and cold rolling. Metallurgical Design of Flat Rolled Steels reviews the current theories and experimental works conducted in this area, and gives a comparative analysis of the obtained results in application to a large variety of steels produced around the world. This guide presents essential material in a fashion that permits rapid application to practical problems while providing the structure and understanding necessary for long-term growth. It first explains how the components fit and work together to make a successful experimental design, then analyzes each component in detail, presenting the various approaches in the form of menus of different strategies and options. Then the text illustrates equations developed by various researchers and compares them in both table and graphic forms. Written in a clear and concise manner, the material is presented using a modular or "building block" approach so readers get to see how the entire structure fits together and learn the essential techniques and terminology necessary to develop more complex designs and analyses.
Download or read book Coordinate Measuring Machines and Systems written by Robert J. Hocken and published by CRC Press. This book was released on 2016-04-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since John Bosch edited and published the first version of this book in 1995, the world of manufacturing and coordinate measuring machines (CMMs) and coordinate measuring systems (CMSs) has changed considerably. However, the basic physics of the machines has not changed in essence but have become more deeply understood. Completely revised and updat
Download or read book Metalworking Fluids written by Jerry P. Byers and published by CRC Press. This book was released on 2016-04-19 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of metalworking fluids benefits nearly every type of manufacturing process, from preventing rust to reducing dust particles and mechanical friction. Metalworking Fluids, Second Edition reintroduces the current state of the art in metalworking fluid technology and its applications. More than a decade since the well-received and widely acclaimed publication of the first edition, new and original contributors-including formulators, physicians, college professors, fluids users, industry consultants, and suppliers of both chemicals and equipment-update every chapter, adding fresh topics and addressing the latest trends in their field. Novel topics include evaluating mist levels, microbial and corrosion control, and innovative waste treatments that remove organic contaminants at a lower cost. The book presents new considerations on the health effects of exposure, safety issues, and regulations affecting both manufacture and use of metalworking fluids. It also publishes real-world costs and benefits of metalworking fluids from the perspective of an end-user, available for the first time in the literature. Co-published with the Society of Tribologists and Lubrication Engineers, Metalworking Fluids, Second Edition is a timely and modern guide to best practices for using metalworking fluids across a wide range of manufacturing and industrial applications, achieving improved productivity and part quality while reducing manufacturing costs and environmental impact.
Download or read book Rod and Bar Rolling written by Youngseog Lee and published by CRC Press. This book was released on 2004-06-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rod and Bar Rolling: Theory and Applications highlights the underlying relationship between solid mechanics and materials science. It provides a detailed overview of the deformation of material at high temperatures, an assessment of rod and bar rolling processes, and an in-depth review of the basics of hot rolling, elasticity, plasticity, and recry
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.
Download or read book Handbook of Machining with Grinding Wheels written by Ioan D. Marinescu and published by CRC Press. This book was released on 2006-12-21 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grinding offers capabilities that range from high-rate material removal to high-precision superfinishing, and has become one of the most widely used industrial machining and surface finishing operations. Reflecting modern developments in the science and practice of modern grinding processes, the Handbook of Machining with Grinding Wheels presents a
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu
