Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Download or read book Wastewater Reclamation and Reuse written by Takashi Asano and published by CRC Press. This book was released on 1998-06-15 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective integration of water and reclaimed wastewater still requires close examination of public health issues, infrastructure and facilities planning, wastewater treatment plant siting, treatment process reliability, economic and financial analyses, and water utility management. This book assembles, analyzes, and reviews the various aspects of wastewater reclamation, recycling, and reuse in most parts of the world. It considers the effective integration of water and reclaimed wastewater, public health issues, infrastructure and facilities planning, waste-water treatment plant siting, treatment process reliability, economic and financial analysis, and water utility management.

Download or read book Uncertainty in Wastewater Treatment Design and Operation written by Evangelina Belia and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Secondary Settling Tanks written by G. A. Ekama and published by International Water Assn. This book was released on 1997-01-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The secondary settling tank (SST) plays a major ro

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Uncertainty in Wastewater Treatment Design and Operation written by Evangelia Belia and published by IWA Publishing. This book was released on 2021-11-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific and Technical Report No. 21 Uncertainty in Wastewater Treatment Design and Operation aims to facilitate the transition of the wastewater profession to the probabilistic use of simulators with the associated benefits of being better able to take advantage of opportunities and manage risk. There is a paradigm shift taking place in the design and operation of treatment plants in the water industry. The market is currently in transition to use modelling and simulation while still using conventional heuristic guidelines (safety factors). Key reasons for transition include: wastewater treatment simulation software advancements; stricter effluent requirements that cannot be designed for using traditional approaches, and increased pressure for more efficient designs (including energy efficiency, green house gas emission control). There is increasing consensus among wastewater professionals that the performance of plants and the predictive power of their models (degree of uncertainty) is a critical component of plant design and operation. However, models and simulators used by designers and operators do not incorporate methods for the evaluation of uncertainty associated with each design. Thus, engineers often combine safety factors with simulation results in an arbitrary way based on designer ‘experience’. Furthermore, there is not an accepted methodology (outside modelling) that translates uncertainty to assumed opportunity or risk and how it is distributed among consultants/contractors and owners. Uncertainty in Wastewater Treatment Design and Operation documents how uncertainty, opportunity and risk are currently handled in the wastewater treatment practice by consultants, utilities and regulators. The book provides a useful set of terms and definitions relating to uncertainty and promotes an understanding of the issues and terms involved. It identifies the sources of uncertainty in different project phases and presents a critical review of the available methods. Real-world examples are selected to illustrate where and when sources of uncertainty are introduced and how models are implemented and used in design projects and in operational optimisation. Uncertainty in Wastewater Treatment Design and Operation defines the developments required to provide improved procedures and tools to implement uncertainty and risk evaluations in projects. It is a vital reference for utilities, regulators, consultants, and trained management dealing with certainty, opportunity and risk in wastewater treatment.

Download or read book Toward a Philosophy of Planning written by Raymond Harrison Wilson and published by . This book was released on 1973 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EPA R5 written by and published by . This book was released on 1973 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.

Download or read book Process and Hydraulic Design of Wastewater Treatment Plants written by Dr S N Tirthakar and published by Rajsons Publications Pvt. Ltd.. This book was released on 2022-06-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the book: This book is intended for undergraduate (B.E/B. Tech) students of civil engineering and post graduate (M.E/M.Tech) students of environmental science and engineering, and beginners in design of wastewater treatment plants. Also, it will be useful to the established designers of wastewater treatment plants, decision makers of municipal corporations, field executives and pollution control board authorities. Wastewater treatment is a vast and interdisciplinary subject. Wastewater treatment plants are very complex hydro-technical facilities. The concept of planning and design of waste water treatment plants through concise book should be easily understandable to students, beginners in process and hydraulic design of wastewater treatment plants. Once the concepts are understood and reasonably enough confidence of process and hydraulic design of wastewater treatment process is gained then one can acquire specific details of design from different sources and can handle even planning and design of large capacity wastewater/sewage plants to different site conditions and layouts. The author felt to attempt and write a book-cum-design guide covering theory of the subject which is normally required to write examinations. Much stress is given on process and hydraulic design, treatment plant hydraulics, fundamentals of hydraulics and its application in wastewater treatment plant design, and hydraulic profiling of plants. The basic hydraulic concepts are same whether they are used for design of elements of sewage treatment plant or industrial waste water treatment. A pilot project on design of 125 MLD capacity sewage treatment plant has been exercised in order to integrate the process design, hydraulic concepts, control points in plant and hydraulics of various units/components that must operate compatibly to provide the desired flow profile. The recommendations of various Indian standards and manual on Sewerage and Sewage Treatment of CPHEO under Ministry of Urban Development, New Delhi have been followed. The SI units of measurement are used throughout the book and in design calculations. The book contain about 100 diagrams, tables, photos and three large diagrams of sewage treatment plant’s layout, hydraulic profiling of main flow path and return flow. Book features: · Provides enough subject theory and design of wastewater treatment plants in detail. · Theory and design considerations of Activated Sludge Process(ASP) and its modifications, advanced wastewater biological treatment processes like- Sequencing Batch Reactor(SBR), Moving Bed Bio-film Reactor(MBBR), Rotating Biological Contactor(RBC), Up-flow Anaerobic Sludge Blanket (UASB) process has been covered in detail. · It includes plant siting and layout development, support facilities, basics of hydraulics, plant hydraulics and pump hydraulics in depth which is required for hydraulic design and profiling of wastewater treatment plants. · A complete process and hydraulic design, and hydraulic profiling of 125 MLD sewage treatment plant. · Process design of Sequencing Batch Reactor (SBR) process. · Appendices: Tables and Nomograms, standard sizes of pipes of various materials, gates, pumps, aerators, air blowers, and table of constants required for hydraulic calculations. Recommendation Useful to:- (a) Students of M. Tech in Environmental Engg (b) Students of B. Tech (Civil Engg) (c) Officers of Municipal corporations, and pollution control boards central/states (d) Beginner in design of wastewater treatment plants (e) Design department of wastewater treatment industries (f) Consultants (g) Advisors of urban development departments

Download or read book Water Systems Analysis Design and Planning written by Mohammad Karamouz and published by CRC Press. This book was released on 2021-12-29 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents three distinct pillars for analysis, design, and planning: urban water cycle and variability as the state of water being; landscape architecture as the medium for built-by-design; and total systems as the planning approach. The increasing demand for water and urban and industrial expansions have caused myriad environmental, social, economic, and political predicaments. More frequent and severe floods and droughts have changed the resiliency and ability of water infrastructure systems to operate and provide services to the public. These concerns and issues have also changed the way we plan and manage our water resources. Focusing on urban challenges and contexts, the book provides foundational information regarding water science and engineering while also examining topics relating to urban stormwater, water supply, and wastewater infrastructures. It also addresses critical emerging issues such as simulation and economic modeling, flood resiliency, environmental visualization, satellite data applications, and digital data model (DEM) advancements. Features: Explores various theoretical, practical, and real-world applications of system analysis, design, and planning of urban water infrastructures Discusses hydrology, hydraulics, and basic laws of water flow movement through natural and constructed environments Describes a wide range of novel topics ranging from water assets, water economics, systems analysis, risk, reliability, and disaster management Examines the details of hydrologic and hydrodynamic modeling and simulation of conceptual and data-driven models Delineates flood resiliency, environmental visualization, pattern recognition, and machine learning attributes Explores a compilation of tools and emerging techniques that elevate the reader to a higher plateau in water and environmental systems management Water Systems Analysis, Design, and Planning: Urban Infrastructure serves as a useful resource for advanced undergraduate and graduate students taking courses in the areas of water resources and systems analysis, as well as practicing engineers and landscape professionals.

Download or read book Onsite Wastewater Treatment Systems Manual written by and published by . This book was released on 2002 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This manual contains overview information on treatment technologies, installation practices, and past performance."--Introduction.

Download or read book Process Design Integration and Intensification written by Mahmoud El-Halwagi and published by MDPI. This book was released on 2019-05-27 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growing emphasis on enhancing the sustainability and efficiency of industrial plants, process integration and intensification are gaining additional interest throughout the chemical engineering community. Some of the hallmarks of process integration and intensification include a holistic perspective in design, and the enhancement of material and energy intensity. The techniques are applicable for individual unit operations, multiple units, a whole industrial facility, or even a cluster of industrial plants. This book aims to cover recent advances in the development and application of process integration and intensification. Specific applications are reported for hydraulic fracturing, palm oil milling processes, desalination, reactive distillation, reaction network, adsorption processes, herbal medicine extraction, as well as process control.

Download or read book Sewer Processes written by Thorkild Hvitved-Jacobsen and published by CRC Press. This book was released on 2013-04-23 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition was published over a decade ago, advancements have been made in the design, operation, and maintenance of sewer systems, and new problems have emerged. For example, sewer processes are now integrated in computer models, and simultaneously, odor and corrosion problems caused by hydrogen sulfide and other volatile organic comp

Download or read book Soft Computing Techniques in Solid Waste and Wastewater Management written by Rama Rao Karri and published by Elsevier. This book was released on 2021-07-24 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Computing Techniques in Solid Waste and Wastewater Management is a thorough guide to computational solutions for researchers working in solid waste and wastewater management operations. This book covers in-depth analysis of process variables, their effects on overall efficiencies, and optimal conditions and procedures to improve performance using soft computing techniques. These topics coupled with the systematic analyses described will help readers understand various techniques that can be effectively used to achieve the highest performance. In-depth case studies along with discussions on applications of various soft-computing techniques help readers control waste processes and come up with short-term, mid-term and long-term strategies. Waste management is an increasingly important field due to rapidly increasing levels of waste production around the world. Numerous potential solutions for reducing waste production are underway, including applications of machine learning and computational studies on waste management processes. This book details the diverse approaches and techniques in these fields, providing a single source of information researchers and industry practitioners. It is ideal for academics, researchers and engineers in waste management, environmental science, environmental engineering and computing, with relation to environmental science and waste management. - Provides a comprehensive reference on the implementation of soft computing techniques in waste management, drawing together current research and future implications - Includes detailed algorithms used, enabling authors to understand and appreciate potential applications - Presents relevant case studies in solid and wastewater management that show real-world applications of discussed technologies

Download or read book Process Design Manual for Upgrading Existing Wastewater Treatment Plants written by Metcalf & Eddy and published by . This book was released on 1974 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic Engineering written by Liquan Xie and published by CRC Press. This book was released on 2013-03-12 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Engineering contains 56 technical papers from the 2012 SREE Conference on Hydraulic Engineering (CHE 2012, Hong Kong, 21-22 December 2012, including the second SREE Workshop on Environment and Safety, WESE 2012). The conference served as a major forum for researchers, engineers and manufacturers to share recent advances, discuss problems, and identify challenges associated with engineering applications in hydraulic engineering, and the contributions showcase recent developments in the areas of hydraulic engineering and environmental engineering. The sections on hydraulic engineering mainly focus on flood prediction and control, hydropower design and construction technology, water and environment, comprehensive water treatment, and urban water supply and drainage, while the contributions related to environmental issues focus on environmental prediction and control techniques in environmental geoscience, environmental ecology, atmospheric sciences, ocean engineering, safety engineering and environmental pollution control. Hydraulic Engineering will be invaluable to academics and professionals in both hydraulic and environmental engineering.