Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.

Download or read book IEEE Standards written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1991 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Design Guide for Electric Power Service Systems for Generating Stations written by American National Standards Institute and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1993-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Glossary of Key Information Security Terms written by Richard Kissel and published by DIANE Publishing. This book was released on 2011-05 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This glossary provides a central resource of definitions most commonly used in Nat. Institute of Standards and Technology (NIST) information security publications and in the Committee for National Security Systems (CNSS) information assurance publications. Each entry in the glossary points to one or more source NIST publications, and/or CNSSI-4009, and/or supplemental sources where appropriate. This is a print on demand edition of an important, hard-to-find publication.

Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.

Download or read book Federal Information System Controls Audit Manual FISCAM written by Robert F. Dacey and published by DIANE Publishing. This book was released on 2010-11 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: FISCAM presents a methodology for performing info. system (IS) control audits of governmental entities in accordance with professional standards. FISCAM is designed to be used on financial and performance audits and attestation engagements. The methodology in the FISCAM incorp. the following: (1) A top-down, risk-based approach that considers materiality and significance in determining audit procedures; (2) Evaluation of entitywide controls and their effect on audit risk; (3) Evaluation of general controls and their pervasive impact on bus. process controls; (4) Evaluation of security mgmt. at all levels; (5) Control hierarchy to evaluate IS control weaknesses; (6) Groupings of control categories consistent with the nature of the risk. Illus.

Download or read book Neutron Generators for Analytical Purposes written by International Atomic Energy Agency and published by IAEA Radiation Technology Repo. This book was released on 2012 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication addresses recent developments in neutron generator (NG) technology. It presents information on compact instruments with high neutron yield to be used for neutron activation analysis (NAA) and prompt gamma neutron activation analysis in combination with high count rate spectrometers. Traditional NGs have been shown to be effective for applications including borehole logging, homeland security, nuclear medicine and the on-line analysis of aluminium, coal and cement. Pulsed fast thermal neutron analysis, as well as tagged and timed neutron analysis, are additional techniques which can be applied using NG. Furthermore, NG can effectively be used for elemental analysis and is also effective for analysis of hidden materials by neutron radiography. Useful guidelines for developing NG based research laboratories are also provided in this publication.

Download or read book Guide for Loading Dry Type Distribution and Power Transformers written by IEEE Standards Publications and published by IEEE Standards Office. This book was released on 2000-11-01 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: General recommendations for the loading of dry-type distribution and power transformers that have 80 C, 115 C, and 150 C average winding rises and insulation systems limited to 150 C, 180 C, and 220 C maximum hottest-spot operating temperatures, respectively, are covered in this guide. Recommendations for ventilated, nonventilated, and sealed dry-type transformers having impregnated insulation systems are included. Keywords: ambient temperature, cast-resin transformer, constant load, derating factors, hottest-spot temperature, loading capability, loading transformer, rated output, resin-encapsulated, solid-cast, time constant, transient loading, encapusation, power distribution, temperature measurement, transformers.

Download or read book Guide to the Software Engineering Body of Knowledge Swebok r written by IEEE Computer Society and published by . This book was released on 2014 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Guide to the Software Engineering Body of Knowledge (SWEBOK(R) Guide), the IEEE Computer Society establishes a baseline for the body of knowledge for the field of software engineering, and the work supports the Society's responsibility to promote the advancement of both theory and practice in this field. It should be noted that the Guide does not purport to define the body of knowledge but rather to serve as a compendium and guide to the knowledge that has been developing and evolving over the past four decades. Now in Version 3.0, the Guide's 15 knowledge areas summarize generally accepted topics and list references for detailed information. The editors for Version 3.0 of the SWEBOK(R) Guide are Pierre Bourque (Ecole de technologie superieure (ETS), Universite du Quebec) and Richard E. (Dick) Fairley (Software and Systems Engineering Associates (S2EA)).

Download or read book IEEE Recommended Practice for Powering and Grounding Electronic Equipment written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide to Industrial Control Systems ICS Security written by Keith Stouffer and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Recommended Practice for Monitoring Electric Power Quality written by and published by . This book was released on 2009 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This recommended practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. This recommended practice describes nominal conditions and deviations from these nominal conditions that may originate within the source of supply or load equipment or may originate from interactions between the source and the load. Also, this recommended practice discusses power quality monitoring devices, application techniques, and the interpretation of monitoring results. Keywords: assessment, compatibility, dip, distortion, electromagnetic phenomena, harmonics, imbalance, instruments, monitoring, power quality, rms variation, sag, swell, transient, unbalance.

Download or read book IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1987-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IEEE Orange Book presents the recommended engineering practices for the selection and application of emergency and standby power systems. It provides commercial facility designers, operators and owners with guidelines for assuring uninterrupted power.

Download or read book IEEE Std 1364 2005 Revision of IEEE Std 1364 2001 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Standard Test Code for Dry type Distribution and Power Transformers written by and published by Inst of Elect & Electronic. This book was released on 1996 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Methods for performing tests specified in IEEE Std C57.12.01-1989 and other referenced standards applicable to dry-type distribution and power transformers are described. This standard is intended for use as a basis for performance, safety, and the proper testing of dry-type distribution and power transformers. This standard applies to all dry-type transformers except instrument transformers, step-voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, and mine transformers".

Download or read book IEEE Guide for Maintenance Operation and Safety of Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1998 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for the numerous personnel who are responsible for safety operating and maintaining industrial and commercial electric power facilities are provided. This guide provides plant engineers with a reference source for the fundamentals of safe and reliable maintenance and operation of industrial and commercial electric power distribution systems.

Download or read book IEEE Guide for Protective Grounding of Power Lines written by and published by . This book was released on 2003 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: