Download or read book Ultrasonic Reflection for Measurement of Oil Film Thickness and Contact Between Dissimilar Materials written by Dedison Gasni and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In Situ written by Michele Schirru and published by Springer. This book was released on 2017-02-21 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a novel ultrasonic instrument for non-invasive and in-situ characterization of journal bearing lubricant viscosity. In particular, the application to journal bearings is described by non-invasively measuring the viscosity and localized power losses throughout operation. This ultrasonic viscometer is based on the reflection of polarized shear waves from a thin resonating coating layer to increase the measurement sensitivity, in comparison to conventional ultrasonic methods. This instrument allows for a full engine oil viscoelastic characterization in-situ. The book investigates the effects of temperature, pressure and shear rate, and describes in detail the ultrasonic setup and method. Further, it demonstrates that the same technique can be applied similarly to monitor the lubrication of other engine components. As such, it offers a unique instrument that can drive the research of oil formulations to improve engine performance and fulfill the requirements of international fuel economy regulations.

Download or read book Tribology and Dynamics of Engine and Powertrain written by Homer Rahnejat and published by Elsevier. This book was released on 2010-09-30 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology, the science of friction, wear and lubrication, is one of the cornerstones of engineering’s quest for efficiency and conservation of resources. Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends provides an authoritative and comprehensive overview of the disciplines of dynamics and tribology using a multi-physics and multi-scale approach to improve automotive engine and powertrain technology.Part one reviews the fundamental aspects of the physics of motion, particularly the multi-body approach to multi-physics, multi-scale problem solving in tribology. Fundamental issues in tribology are then described in detail,from surface phenomena in thin-film tribology, to impact dynamics, fluid film and elastohydrodynamic lubrication means of measurement and evaluation. These chapters provide an understanding of the theoretical foundation for Part II which includes many aspects of the physics of motion at a multitude of interaction scales from large displacement dynamics to noise and vibration tribology, all of which affect engines and powertrains. Many chapters are contributed by well-established practitioners disseminating their valuable knowledge and expertise on specific engine and powertrain sub-systems. These include overviews of engine and powertrain issues, engine bearings, piston systems, valve trains, transmission and many aspects of drivetrain systems. The final part of the book considers the emerging areas of microengines and gears as well as nano-scale surface engineering.With its distinguished editor and international team of academic and industry contributors, Tribology and dynamics of engine and powertrain is a standard work for automotive engineers and all those researching NVH and tribological issues in engineering. Reviews fundamental aspects of physics in motion, specifically the multi-body approach to multi physics Describes essential issues in tribology from surface phenomena in thin film tribology to impact dynamics Examines specific engine and powertrain sub-systems including engine bearings, piston systems and value trains

Download or read book ASME Technical Papers written by and published by . This book was released on with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Life Cycle Tribology written by Duncan Dowson and published by Elsevier. This book was released on 2005-10-13 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 31st Leeds-Lyon Symposium on Tribology was held at Trinity and All Saints College in Leeds under the title "Life Cycle Tribology" from Tuesday 7th September until Friday 10th September 2004. Over the three days of presentations that followed, life cycle tribology was explored across a range of areas including automotive tribology, bearings, bio-degradability and sustainability, bio-tribology, coatings, condition monitoring, contact mechanics, debris effects, elastohydrodynamic lubrication, lubricants, machine systems, nanotribology, rolling contact fatigue, transmissions, tribochemistry and wear and failure. Invited talks in these fields were presented by leading international researchers and practitioners, namely C.J. Hooke, J.A. Williams, R.J.K. Wood, G. Isaac, S.C. Tung, D. Price, I. Sherrington, M. Hadfield, K. Kato, R.I. Taylor, H.P. Evans, R.S. Dwyer-Joyce and H. Rahnejat.

Download or read book Journal of Tribology written by and published by . This book was released on 2006 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Paper written by and published by . This book was released on 1993 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultrasonic Testing of Materials written by Josef Krautkrämer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amendments of this third English edition with respect to the second one concern beside some printing errors the replacement of some pictures in part D by more modern ones and updating the list of stand ards to the state of the fourth German edition. J OSEF KRAUTKRÄMER Cologne, January 1983 Preface to the Second Edition This seeond English edition is based on the third German edition. In view of most recent teehnologieal advanees it has beeome neeessary in many instanees to supplement the seeond German edition and to revise some parts completely. In addition to piezo-eleetric methods, others are now also extensively diseussed in Chapter 8. As for the intensity method, ultrasonie holo graphy is treated in the new Seetion 9. 4. In Part B, for reasons of syste maties, the resonanee method has been ineluded under transit-time methods. It appeared neeessary to elaborate in greater detail the defini tion of the properties of pulse-echo testing equipment and their measure ments (10. 4). The more recent findings of pulse speetroscopy (5. 6) and sound-emission analysis (12) are mentioned only in passing because their significanee is still controversial. Apart from numerous additions, partieularly those coneerning automatie testing installations, Part C also eontains a new chapter whieh deals with tests on nu eIe ar reactors (28), as weIl as abrief diseussion of surfaee-hardness tests (32. 4). It beeame impossible to include a critieal analysis of the principal standards in Chapter 33.

Download or read book Ultrasonics written by Dale Ensminger and published by CRC Press. This book was released on 2011-09-19 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in power electronics greatly benefit the multidisciplinary field of modern ultrasonics. More powerful, compact, and versatile electronic chips and software enable new computer-based devices for real-time data capture, storage, analysis, and display and advance the science and technology employed in commercial systems and applications of ultrasound. Reviewing the scientific basis behind these improvements, Ultrasonics: Fundamentals, Technologies, and Applications, Third Edition discusses them in detail, with new and additional figures and references, offering a completely revised and expanded examination of the state of modern ultrasonics. This new edition of a bestselling industry reference discusses the full breadth of ultrasonics applications for industrial and medical use and provides the fundamentals and insights gathered over the authors’ collective 80 years in the field. It provides a unique and comprehensive treatment of the science and technology behind the latest advancements and applications in both low and high power implementations. Coverage combines fundamental physics, a review and analysis of sensors and transducers, and the systems required for the full spectrum of industrial, nondestructive testing and medical and biomedical uses. It includes citations of numerous references and covers both main stream and the more unusual and obscure applications of ultrasound. Ultrasonics is ubiquitous in its industrial applications for sensing, NDT, and process measurements, in high power forms for processing and sonochemistry, as well as in medical procedures where it is used for diagnosis, therapy and surgery. This book provides a complete overview of the field, presenting numerous applications, cutting-edge advancements and improvements, additional figures and references, and a look at future directions.

Download or read book Ultrasonic Flaw Detection written by and published by . This book was released on 1958 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.

Download or read book Eureka written by and published by . This book was released on 2003 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Battelle Technical Review written by Battelle Memorial Institute and published by . This book was released on 1952 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engine Testing written by A. J. Martyr and published by Elsevier. This book was released on 2012-04-18 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engine Testing is a unique, well-organized and comprehensive collection of the different aspects of engine and vehicle testing equipment and infrastructure for anyone involved in facility design and management, physical testing and the maintenance, upgrading and trouble shooting of testing equipment. Designed so that its chapters can all stand alone to be read in sequence or out of order as needed, Engine Testing is also an ideal resource for automotive engineers required to perform testing functions whose jobs do not involve engine testing on a regular basis. This recognized standard reference for the subject is now enhanced with new chapters on hybrid testing, OBD (on-board diagnostics) and sensor signals from modern engines. One of few books dedicated to engine testing and a true, recognized market-leader on the subject Covers all key aspects of this large topic, including test-cell design and setup, data management, and dynamometer selection and use, with new chapters on hybrid testing, OBD (on-board diagnostics) and sensor signals from modern engines Brings together otherwise scattered information on the theory and practice of engine testing into one up-to-date reference for automotive engineers who must refer to such knowledge on a daily basis

Download or read book Waves in Layered Media written by L Brekhovskikh and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waves in Layered Media discusses different theories about the relationship between waves and media. The book specifically covers several factors that can affect the behavior and formation of various kinds of waves in different types of media. Comprised of nine chapters, the book establishes the fundamentals by first tackling simplest concepts, such as the behavior plane wave and discretely layered media. The succeeding chapters cover much more complex ideas, such as the refraction and reflection of waves, spherical wave, and wave in inhomogeneous media. The book will be a great asset to researchers whose work involves acoustics, or to professionals whose line of work involves sound waves.

Download or read book Nondestructive Characterization of Materials II written by Jean F. Bussière and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possibility of nondestructively characterizing the microstruc ture, morphology or mechanical properties of materials is certainly a fascinating subject. In principle, such techniques can be used at all stages of a material's life - from the early stages of processing, to the end of a structural component's useful life. Interest in the subject thus arises not only from a purely scientific point of view but is also strongly motivated by economic pressures to improve productivity and quality in manufacturing, to insure the reliability and extend the life of existing structures. The present volume represents the edited papers presented at the Second International Symposium on the Nondestructive Characterization of Materials, held in Montreal, Canada, July 21-23, 1986. The Proceedings are divided into eight sections, which reflect the multidisciplinary nature of characterizing materials nondestructively: Polymers and Composites, Ceramics and Powder Metallurgy, Metals, Layered Structures/Adhesive Bonds/Welding, Degradation/Aging, Texture/ Anisotropy, Stress, and New Techniques. Invited papers by R. Hadcock of Grumman Aircraft Systems, R. Cannon of Rutgers University, H. Yada of Nippon Steel and R. Bridenbaugh of Alcoa review respectively the processing of polymer matrix composites, ceramics, steel and aluminum, emphasizing the need for material property sensors to improve process and quality control. Two other invited papers, one by A. Wedgwood of Harwell and the other by P. Holler of the IzFP in Saarbrucken review state of the art techniques to characterize particulate matter and metals respectively.

Download or read book Mechanical Industrial and Manufacturing Technologies written by Li Kai and published by Trans Tech Publications Ltd. This book was released on 2012-06-26 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings consist of the fully refereed papers presented at the conference. The main conference themes were Mechanical Engineering, Materials and Energy. The peer-reviewed papers are divided into six chapters: Research in Numerical Simulation and Optimisation; Characteristic Studies of Mechanical and Material Systems; Chaotic States and Analysis of Systems; Vibrational Analysis and Mechanics of Structures etc.; Materials Science and Technologies; Mechanical/Automotive Systems and Allied Topics