Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 1998 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports NIST research and development in the physical and engineering sciences in which the Institute is active. These include physics, chemistry, engineering, mathematics, and computer sciences. Emphasis on measurement methodology and the basic technology underlying standardization.
Download or read book Fluid Mechanics of Flow Metering written by Wolfgang Merzkirch and published by Springer Science & Business Media. This book was released on 2005 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow meters measure the volumetric flow rate in a pipeline. Most meters are based on deriving a signal from the fluid flow and calibrating the signal against the volumetric flow rate. The calibration is done in fully-developed flow, and the same state of flow must exist at the meter’s position when it is in practical use. Because the field of flow metering has been neglected by fluid mechanicists for a long time, this book addresses two major fluid mechanical problems in flow metering: the analysis of signal generation in turbulent pipe flow, which explains the function of the meter beyond a simple calibration, and the possible use of a meter in non-developed flows. These problems are investigated with reference to, and examples from, a variety of meters, e.g. ultrasound cross-correlation meters, vortex meters, and turbine meters. Studying these problems requires consideration of specific phenomena in turbulent non-developed pipe flow, as caused by installations, and finding special solutions with signal processing, both of which are included in the book.
Download or read book WK02FM 002 Optimal Flow Measurement Understanding Selection Applicaiton Installation and Operation of Flowmeters Workshop Proceedings written by and published by Instrumentation Testing Association. This book was released on with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bose Einstein Condensation written by Keith Burnett (Ed); Mark Edwar and published by DIANE Publishing. This book was released on 1996-12 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most remarkable effects that quantum mechanics adds to the catalog of the thermal properties of matter is "condensation" of an ideal gas of identical particles into a single quantum state, the principle of which was discovered in the theory of statistical mechanics by Bose and Einstein in the 1920s. Bose-Einstein condensation (BEC) is a mechanism for producing a macroscopic quantum system, and is exemplary of the macroscopic quantum phenomena of superconductivity and superfluidity.These 15 papers provide an introduction to current work on BEC.
Download or read book Pipeline Rules of Thumb Handbook written by E.W. McAllister and published by Gulf Professional Publishing. This book was released on 2013-09-27 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in easy-to-use, step-by-step order, Pipeline Rules of Thumb Handbook is a quick reference for day-to-day pipeline operations. For more than 35 years, the Pipeline Rules of Thumb Handbook has served as the "go-to" reference for solving even the most day-to-day vexing pipeline workflow problems. Now in its eighth edition, this handbook continues to set the standard by which all other piping books are judged. Along with over 30% new or updated material regarding codes, construction processes, and equipment, this book continues to offer hundreds of "how-to" methods and handy formulas for pipeline construction, design, and engineering and features a multitude of calculations to assist in problem solving, directly applying the rules and equations for specific design and operating conditions to illustrate correct application, all in one convenient reference. For the first time in this new edition, we are taking the content and data off the page and adding a new dimension of practical value for you with online interactive features to accompany some of the handiest and most useful material from the book: - Interactive tables that takes data from the book and turns them into a sortable spreadsheet format that gives you the ability to perform your own basic filtering functions, show/hide columns of just the data that is important to you, and download the table into an Excel spreadsheet for additional use - A graph digitizer which pulls a graph from the book and gives you the power to plot your own lines on the existing graph, see all the relative x/y coordinates of the graph, and name and color code your lines for clarity - A converter calculator performing basic conversions from the book such as metric conversions, time, temperature, length, power and more Please feel free to visit the site: http://booksite.elsevier.com/9780123876935/index.php, and we hope you will find our features as another useful and efficient tool for you in your day-to-day activity. - Identify the very latest pipeline management tools and technologies required to extend the life of mature assets - Understand the obstacles and solutions associated with pipeline operations in challenging conditions - Analyze the key issues relating to flow assurance methodologies and how they can impact pipeline integrity - Evaluate effective ways to manage cost and project down-time
Download or read book Publications of the National Institute of Standards and Technology 1988 Catalog written by Rebecca J. Pardee and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipeline Rules of Thumb Handbook written by M.J. Kaiser and published by Gulf Professional Publishing. This book was released on 2022-09-02 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline Rules of Thumb Handbook: A Manual of Quick, Accurate Solutions to Everyday Pipeline Engineering Problems, Ninth Edition, the latest release in the series, serves as the "go-to" source for all pipeline engineering answers. Updated with new data, graphs and chapters devoted to economics and the environment, this new edition delivers on new topics, including emissions, decommissioning, cost curves, and more while still maintaining the quick answer standard display of content and data that engineers have utilized throughout their careers. Glossaries are added per chapter for better learning tactics, along with additional storage tank and LNG fundamentals. This book continues to be the high-quality, classic reference to help pipeline engineers solve their day-to-day problems. - Contains new chapters that highlight costs, safety and environmental topics, including discussions on emissions - Helps readers learn terminology, with updated glossaries in every chapter - Includes renovated graphs and data tables throughout
Download or read book Water Measurement Manual written by and published by . This book was released on 2001 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Measurement written by Bela G. Liptak and published by CRC Press. This book was released on 2020-06-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully illustrated with diagrams, tables, and formulas, Flow Measurement covers virtually every type of flow meter in use today. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sewer Flow Measurement written by Philip E. Shelley and published by . This book was released on 1975 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Technology for Process Automation written by Anders Andersson and published by CRC Press. This book was released on 2017-06-27 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost every industry that use liquids and gas in any form has a need to measure flow, temperature and pressure. This text is a practical guide on how to accurately use these measuring instruments to control processes in manufacturing industries for food, beverages, chemicals, pharmaceuticals, oil, water and waste water, power, etc. With higher prices of raw materials and more severe requirements for safety and environmental issues, there is a growing demand to measure with higher precision. The book includes a number of practical examples from various industries. It discusses how to comply with safety standards regarding measurements and explains how legal control systems apply to measurements. The aim is to help any process industry reduce the risk of high costs and damage to both people and equipment.
Download or read book Fluid Flow Measurement written by Paul J. LaNasa and published by Butterworth-Heinemann. This book was released on 2014-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications
Download or read book Experimental Methods and Instrumentation for Chemical Engineers written by Gregory S. Patience and published by Newnes. This book was released on 2013-04-05 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Methods and Instrumentation for Chemical Engineers is a practical guide for research engineers and students, process engineers and, consultants, and others in the chemical engineering field. This unique book thoroughly describes experimental measurements and instrumentation in the contexts of pressure, temperature, fluid metering, chromatography, and more. Chapters on physico-chemical analysis and analysis of solids and powders are included as well. Throughout the book, the author examines all aspects of engineering practice and research. The principles of unit operations, transport phenomena, and plant design form the basis of this discipline. Experimental Methods and Instrumentation for Chemical Engineers integrates these concepts with statistics and uncertainty analysis to define factors that are absolutely necessary to measure and control, how precisely, and how often. Experimental Methods and Instrumentation for Chemical Engineers is divided into several themes, including the measurement of pressure, temperature flow rate, physico-chemical properties, gas and liquid concentrations and solids properties. Throughout the book, the concept of uncertainty is discussed in context, and the last chapter is dedicated to designing and experimental plan. The theory around the measurement principles is illustrated with examples. These examples include notions related to plant design as well as cost and safety. - Contains extensive diagrams, photos, and other illustrations as well as manufacturers' equipment and descriptions with up-to-date, detailed drawings and photos - Includes exercises at the end of each chapter, helping the reader to understand the problem by solving practical examples - Covers research and plant application, including emerging technologies little discussed in other sources
Download or read book Measurement and Safety written by Béla G. Lipták and published by CRC Press. This book was released on 2016-11-25 with total page 2226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is dedicated to the next generation of automation engineers working in the fields of measurement, control, and safety, describing the sensors and detectors used in the measurement of process variables.
Download or read book Measurement Instrumentation and Sensors Handbook written by John G. Webster and published by CRC Press. This book was released on 2017-12-19 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.
