Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.
Download or read book Ultrafine Grain Steels written by Maria Jose Quintana and published by Createspace Independent Publishing Platform. This book was released on 2016-04-11 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, both the steelmaking industry and laboratories in different parts of the world, have shown an increasing interest in reaching an industrial-level production of ultrafine grained steels (also known as ultrafine ferrite), which have a grain size d lower than 5 μm, and enhanced mechanical resistance and fracture toughness. At room temperature, the capacity of the material to be deformed during bending or drawing operations (typical of requirements for automotive parts applications) depends on the interaction of a hard and a soft phase in the microstructure. On the other hand, at high temperatures, these steels may show superplastic behavior if deformed at a precise combination of temperature and strain rate.
Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.
Download or read book Ultrafine Grained Metals written by Heinz Werner Höppel and published by MDPI. This book was released on 2018-07-02 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Ultrafine-grained Metals" that was published in Metals
Download or read book Microstructure and Texture in Steels written by Arunansu Haldar and published by Springer Science & Business Media. This book was released on 2009-09-03 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure and Texture in Steels and Other Materials comprises a collection of articles pertaining to experimental and theoretical aspects of the evolution of crystallographic texture and microstructure during processing of steels and some other materials. Among the topics covered is the processing-microstructure-texture-property relationship in various kinds of steels, including the latest grade. Special emphasis has been given to introduce recent advances in the characterization of texture and microstructure, as well as modeling. The papers included are written by well-known experts from academia and industrial R and D, which will provide the reader with state-of-the-art, in-depth knowledge of the subject. With these attributes, Microstructure and Texture in Steels and Other Materials is expected to serve the cause of creating awareness of current developments in microstructural science and materials engineering among academic and R and D personnel working in the field.
Download or read book International Symposium on Ultrafine Grained Steels ISUGS 2001 written by Nihon Tekkō Kyōkai and published by . This book was released on 2001 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2020-02-13 with total page 2046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Ultrafine Grained Dual phase Steels written by Marion Calcagnotto and published by . This book was released on 2011 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.
Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer. This book was released on 2009-01-07 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.
Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels
Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.
Download or read book Mechanical Behavior of an Ultrafine Grain Ferritic Steel written by V. Ramachandran and published by . This book was released on 1973 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical properties of a ferritic steel with grain size ranging from 0.42 to 8 micrometers has been investigated. The material shows a marked increase in plastic instability. Decreasing the grain size is shown to decrease the temperature range for dynamic strain aging. (Author).
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.
Download or read book Analysis of Fracture Toughness Mechanism in Ultra fine grained Steels written by Toshihiro Hanamura and published by Springer. This book was released on 2014-09-04 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, advanced steel technologies mainly developed at the National Institute for Materials Science (NIMS), Japan, for structure control, mechanical properties, and the related mechanisms are introduced and discussed. NIMS has long worked on developing advanced steel techniques, namely, producing advanced steels by using only simple alloying elements such as carbon, manganese, and silicon, and also by utilizing steel scrap. The hope is that this approach will lead to a technology of a so-called steel-to-steel recycling process, with the ultimate goal of a recycling process such as an automotive-steel-to-automotive-steel recycling process to take the place of the current cascade-type recycling system. The main idea is to utilize ultra-grain refining structures and hetero structures as well as martensite structures. In particular, the focus of this book is on tensile strength and toughness of advanced steels from both the fundamental and engineering points of view. Fundamentally, a unique approach to analysis is taken, based on fracture surface energy as effective grain size is employed to better understand the mechanism of property improvement. From the engineering point of view, in fracture toughness such factors as crack tip opening displacement (CTOD) of advanced steels are evaluated in comparison with those of conventional steels.
