Download or read book Ultrafast K alpha X ray Thomson Scattering from Shock Compressed Lithium Hydride written by and published by . This book was released on 2008 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectrally and temporally resolved x ray Thomson scattering using ultrafast Ti K-[alpha] x-rays has provided experimental validation for modeling of the compression and heating of shocked matter. The coalescence of two shocks launched into a solid density LiH target by a shaped 6 nanosecond heater beam was observed from rapid heating to temperatures of 2.2 eV, enabling tests of shock timing models. Here, the temperature evolution of the target at various times during shock progression was characterized from the intensity of the elastic scattering component. The observation of scattering from plasmons, electron plasma oscillations, at shock coalescence indicates a transition to a dense metallic plasma state in LiH. From the frequency shift of the measured plasmon feature the electron density was directly determined with high accuracy, providing a material compression of a factor of three times solid density. The quality of data achieved in these experiments demonstrates the capability for single-shot dynamic characterization of dense shock compressed matter. The conditions probed in this experiment are relevant for the study of the physics of planetary formation and to characterize inertial confinement fusion targets for experiments such as on the National Ignition Facility (NIF), LLNL.

Download or read book Measurements of Ionic Structure in Shock Compressed Lithium Hydride from Ultra fast X ray Thomson Scattering written by and published by . This book was released on 2009 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: We present the first ultrafast temporally, spectrally and angularly resolved x-ray scattering measurements from shock-compressed matter. These laser-compressed lithium-hydride samples are well characterized by inelastic Compton and Plasmon scattering of a K-[alpha] x-ray probe providing independent measurements of temperature and density. The experimental spectra yield the absolute elastic and inelastic scattering intensities from the measured density of free electrons. The data show excellent agreement with the total intensity and structure when using the two-species form factor and accounting for ionic screening.

Download or read book Ultra fast X ray Thomson Scattering Measurements of Insulator metal Transition in Shock compressed Matter written by and published by . This book was released on 2008 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectrally resolved scattering of ultra-short pulse laser-generated K-[alpha] x rays has been applied to measure the heating and compression of shocked solid-density lithium hydride. Two shocks launched by a nanosecond laser pulse coalesce yielding pressures of 400 gigapascals. The evolution of the intensity of the elastic (Rayleigh) scattering component indicates rapid heating to temperatures of 25,000 K on a 100 ps time scale. At shock coalescence, the scattering spectra show the collective plasmon oscillations indicating the transition to the dense metallic plasma state. The plasmon frequency determines the material compression, which is found to be a factor of three thereby reaching conditions in the laboratory important for studying astrophysics phenomena.

Download or read book K alpha X ray Thomson Scattering From Dense Plasmas written by and published by . This book was released on 2009 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectrally resolved Thomson scattering using ultra-fast K-[alpha] x-rays has measured the compression and heating of shocked compressed matter. The evolution and coalescence of two shock waves traveling through a solid density LiH target were characterized by the elastic scattering component. The density and temperature at shock coalescence, 2.2 eV and 1.7 x 1023cm−3, were determined from the plasmon frequency shift and the relative intensity of the elastic and inelastic scattering features in the collective scattering regime. The observation of plasmon scattering at coalescence indicates a transition to the dense metallic state in LiH. The density and temperature regimes accessed in these experiments are relevant for inertial confinement fusion experiments and for the study of planetary formation.

Download or read book Plasma Scattering of Electromagnetic Radiation written by John Sheffield and published by Academic Press. This book was released on 2010-11-25 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents one of the most powerful methods of plasma diagnosis in exquisite detail, to guide researchers in the theory and measurement techniques of light scattering in plasmas. Light scattering in plasmas is essential in the research and development of fusion energy, environmental solutions, and electronics.Referred to as the "Bible" by researchers, the work encompasses fusion and industrial applications essential in plasma research. It is the only comprehensive resource specific to the plasma scattering technique. It provides a wide-range of experimental examples and discussion of their principles with worked examples to assist researchers in applying the theory. - Computing techniques for solving basic equations helps researchers compare data to the actual experiment - New material on advances on the experimental side, such as the application of high density plasmas of inertial fusion - Worked out examples of the scattering technique for easier comprehension of theory

Download or read book Ultra fast X ray Thomson Scattering Measurements of Coalescing Shock heated Matter written by and published by . This book was released on 2008 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experiment in this work was preformed at the Titan laser facility (S1) where a short pulse beam at a wavelength of 1053nm delivered up to 350J in 0.5 to 20 ps and a long pulse beam at 527nm, 2[omega] frequency provided energies up to 450J in 1 to 6 ns. Long pulse shaping in this experiment, similar to future capabilities at NIF, was primarily a 4ns long foot with an intensity of 1 x 1013 W/cm2, followed by a 2ns long peak with an intensity of 3 x 1013 W/cm2. A ≈ 600 um phase plate was used on the long pulse beam to moderate non-uniformities in the intensity profile. An illustration of the Thomson scattering setup for this experiment is provided in Fig. 1 of the main text. A nearly mono-energetic scattering source of [Delta]E/E ≈ 0.3% in the 4.5 keV Ti K-alpha line was produced via intense short-pulse laser irradiation of 1.9 x 3 x 0.01 mm Ti foils, creating energetic keV electrons in the process (S2, S3). The nearly isotropic source emission (S4) is produced in the cold solid density bulk of the foil from electron K shell ionization of neutral or weakly ionized atoms, with an emission size on the order of the laser focal spot. By optimizing the laser intensity and pulse width to 4.4 x 1016 W cm−2, a total of 2.3 x 1013 x-ray photons have been produced into 4[pi]. This value corresponds to a conversion efficiency of laser energy into Ti K-alpha x-ray energy of 5 x 10−5, see Fig. S1. These sources provide ≈10 ps x-ray pulses as measured experimentally (S5).

Download or read book X ray Radiography and Scattering Diagnosis of Dense Shock Compressed Matter written by and published by . This book was released on 2009 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly coupled Boron plasma has been probed by spectrally resolving an x-ray source scattered by the plasma. Electron density was inferred from the inelastic feature in the collective scattering regime. In addition, the mass density inferred from the non-collective X-ray Thomson scattering has been tested with independent characterization using X-ray radiography in the same drive condition. High-intensity laser produced K-alpha radiation was used as a backlighter for these dynamically compressed plasma experiments providing a high temporal resolution of the measurements. Mass density measurements from both methods are in good agreement. The measurements yield a compression of 1.3 in agreement with detailed radiation-hydrodynamic modeling. From the charge state measured in the non-collective regime and the electron density measured in the collective regime the mass density can then be constrained to 3.15 ± 0.16.

Download or read book X ray Thomson Scattering Measurements of Temperature and Density from Multi shocked CH Capsules written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Proof-of-principle measurements of the electron densities, temperatures, and ionization states of spherically compressed multi-shocked CH (polystyrene) capsules have been achieved using spectrally resolved x-ray Thomson scattering. A total energy of 13.5 kJ incident on target is used to compress a 70 [mu]m thick CH shell above solid-mass density using three coalescing shocks. Separately, a laser-produced zinc He-[alpha] x-ray source at 9 keV delayed 200 ps-800 ps after maximum compression is used to probe the plasma in the non-collective scattering regime. The data show that x-ray Thomson scattering enables a complete description of the time-dependent hydrodynamic evolution of shock-compressed CH capsules, with a maximum measured density of [rho]> 6 g cm-3. Additionally, the results demonstrate that accurate measurements of x-ray scattering from bound-free transitions in the CH plasma demonstrate strong evidence that continuum lowering is the primary ionization mechanism of carbon L-shell electrons.

Download or read book Demonstration of Successful X ray Thomson Scattering Using Picosecond K alpha X ray Sources for the Characterization of Dense Heated Matter written by and published by . This book was released on 2008 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: We discuss the first successful K-[alpha] x-ray Thomson scattering experiment from solid density plasmas for use as a diagnostic in determining the temperature, density, and ionization state of warm dense matter with picosecond resolution. The development of this source as a diagnostic and stringent requirements for successful K-[alpha] x-ray Thomson scattering are addressed. Data for the experimental techniques described in this paper [1] suggest the capability of single shot characterization of warm dense matter and the ability to use this scattering source at future Free Electron Lasers (FEL) where comparable scattering signal levels are predicted.

Download or read book Experimental Characterization of an Ultra fast Thomson Scattering X ray Source with Three dimensional Time and Frequency domain Analysis written by and published by . This book was released on 2004 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a detailed comparison of the measured characteristics of Thomson backscattered x-rays produced at the PLEIADES (Picosecond Laser-Electron Interaction for the Dynamic Evaluation of Structures) facility at Lawrence Livermore National Laboratory to predicted results from a newly developed, fully three-dimensional time and frequency-domain code. Based on the relativistic differential cross section, this code has the capability to calculate time and space dependent spectra of the x-ray photons produced from linear Thomson scattering for both bandwidth-limited and chirped incident laser pulses. Spectral broadening of the scattered x-ray pulse resulting from the incident laser bandwidth, perpendicular wave vector components in the laser focus, and the transverse and longitudinal phase space of the electron beam are included. Electron beam energy, energy spread, and transverse phase space measurements of the electron beam at the interaction point are presented, and the corresponding predicted x-ray characteristics are determined. In addition, time-integrated measurements of the x-rays produced from the interaction are presented, and shown to agree well with the simulations.

Download or read book Physics of and Science with X Ray Free Electron Lasers written by J. Hastings and published by IOS Press. This book was released on 2020-12-18 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many X-Ray Free-Electron Lasers (X-FELs) have been designed, built and commissioned since the first lasing of the Linac Coherent Light Source in the hard and soft X-ray regions, and great progress has been made in improving their performance and extending their capabilities. Meanwhile, experimental techniques to exploit the unique properties of X-FELs to explore atomic and molecular systems of interest to physics, chemistry, biology and the material sciences have also been developed. As a result, our knowledge of atomic and molecular science has been greatly extended. Nevertheless, there is still much to be accomplished, and the potential for discovery with X-FELs is still largely unexplored. The next generation of scientists will need to be well versed in both particle beams/FEL physics and X-ray photon science. This book presents material from the Enrico Fermi summer school: Physics of and Science with X-Ray Free-Electron Lasers, held at the Enrico Fermi International School of Physics in Varenna, Italy, from 26 June - 1 July 2017. The lectures presented at the school were aimed at introducing graduate students and young scientists to this fast growing and exciting scientific area, and subjects covered include basic accelerator and FEL physics, as well as an introduction to the main research topics in X-FEL-based biology, atomic molecular optical science, material sciences, high-energy density physics and chemistry. Bridging the gap between accelerator/FEL physicists and scientists from other disciplines, the book will be of interest to all those working in the field.

Download or read book Macromolecular Crystallography written by Charles W. Carter and published by Gulf Professional Publishing. This book was released on 1997 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Accurate molecular structures is vital for rational drug design and for structure based functional studies directed toward the development of effective therapeutic agents and drugs. Crystallography can reliably predict structure, both in terms of folding and atomic details of bonding. * Phases * Map interpretation and refinement * Analysis and software.

Download or read book Nanotechnology Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Hard X ray Photoelectron Spectroscopy HAXPES written by Joseph Woicik and published by Springer. This book was released on 2015-12-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first complete and up-to-date summary of the state of the art in HAXPES and motivates readers to harness its powerful capabilities in their own research. The chapters are written by experts. They include historical work, modern instrumentation, theory and applications. This book spans from physics to chemistry and materials science and engineering. In consideration of the rapid development of the technique, several chapters include highlights illustrating future opportunities as well.

Download or read book The Physics of Inertial Fusion written by Stefano Atzeni and published by OUP Oxford. This book was released on 2004-06-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is on inertial confinement fusion, an alternative way to produce electrical power from hydrogen fuel by using powerful lasers or particle beams. It involves the compression of tiny amounts (micrograms) of fuel to thousand times solid density and pressures otherwise existing only in the centre of stars. Thanks to advances in laser technology, it is now possible to produce such extreme states of matter in the laboratory. Recent developments have boosted laser intensities again with new possibilities for laser particle accelerators, laser nuclear physics, and fast ignition of fusion targets. This is a reference book for those working on beam plasma physics, be it in the context of fundamental research or applications to fusion energy or novel ultra-bright laser sources. The book combines quite different areas of physics: beam target interaction, dense plasmas, hydrodynamic implosion and instabilities, radiative energy transfer as well as fusion reactions. Particular attention is given to simple and useful modelling, including dimensional analysis and similarity solutions. Both authors have worked in this field for more than 20 years. They want to address in particular those teaching this topic to students and all those interested in understanding the technical basis.

Download or read book Pathways to Modern Chemical Physics written by Salvatore Califano and published by Springer Science & Business Media. This book was released on 2012-05-26 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this historical volume Salvatore Califano traces the developments of ideas and theories in physical and theoretical chemistry throughout the 20th century. This seldom-told narrative provides details of topics from thermodynamics to atomic structure, radioactivity and quantum chemistry. Califano’s expertise as a physical chemist allows him to judge the historical developments from the point of view of modern chemistry. This detailed and unique historical narrative is fascinating for chemists working in the fields of physical chemistry and is also a useful resource for science historians who will enjoy access to material not previously dealt with in a coherent way.