Download or read book Ultra precision Bearings written by F Wardle and published by Elsevier. This book was released on 2015-02-10 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearing: ball, hydrodynamic, aerodynamic, hydrostatic and aerostatic. The book concludes with a comparison of these types of bearing and their applications. Provides practical information relating to precision bearing design and application Provides an insight into the basic mechanisms that influence precision bearing performance Written by an experienced and well respected bearing specialist

Download or read book Fly Cutting Technology for Ultra precision Machining written by Suet To and published by Springer Nature. This book was released on 2023-09-24 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the fly cutting technique, an ultra-precision mechanical machining technology which is regarded as the fastest and most reliable low-cost machining method to generate high quality complex surfaces. The ultra-precision raster milling provides more flexibility and suitability for freeform and structural surfaces with a uniform quality with sub-micrometric form error and nanometric surface roughness. These surfaces are widely applied into optics, medicine, biotechnology, electronics, and communications. The fundamental and latest advancing knowledge of fly-cutting technology is important for the future development and applications in ultra-precision mechanical machining technology. This book provides a good reference for fly-cutting technology in ultra-precision machining for undergraduate and postgraduate students, researchers, engineers, and postdoctoral fellow in advanced manufacturing area. It gives the audience an overview of the working principles, process mechanism, salient features, applications, and research directions of ultra-precision fly-cutting technology.

Download or read book Foundations of Ultra Precision Mechanism Design written by Stuart T. Smith and published by CRC Press. This book was released on 2017-07-12 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realm of ultra precision mechanisms, for example in controlling motion to small fractions of a micrometer, is encroaching into many fields of technology. This book aims to provide a bridge for those moving from either an engineering or physics background towards the challenges offered by ultraprecision mechanisms. Using case study examples, this book provides a guide to basic techniques and gives technical, analytical and practical information.

Download or read book Ultra precision High Performance Cutting written by Ekkard Brinksmeier and published by Springer Nature. This book was released on 2021-09-20 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the research report of the DFG Research Unit FOR 1845 (2014-2020) of the Universities of Bremen and Hannover. The thematic focus lies on speeding up ultra-precision machining technology by following a holistic approach to high-performance cutting. This includes ultra-precision milling at high spindle speeds (>10000 rpm), precision tool setting mechanisms for multi-cutting-edge diamond milling tools, magnetic levitation technology for high velocity feed axes, and dedicated control strategies for error identification and compensation at high speeds. Furthermore, automation and measurement aspects of the machine setup process especially for precision balancing of the spindle rotors are presented. Finally, it is demonstrated that how the developed technologies may be integrated into a common machine tool setup. The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Download or read book Simulation and Experiments of Material Oriented Ultra Precision Machining written by Junjie Zhang and published by Springer. This book was released on 2018-12-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-precision machining is a promising solution for achieving excellent machined surface quality and sophisticated micro/nano-structures that influence the applications of components and devices. Further, given the ultrathin layer of material removed, it is a highly coupled process between cutting tool and material. In this book, scientists in the fields of mechanical engineering and materials science from China, Ukraine, Japan, Singapore present their latest research findings regarding the simulation and experiment of material-oriented ultra-precision machining. Covering various machining methods (cutting, grinding, polishing, ion beam and laser machining) and materials (metal, semiconductor and hard-brittle ceramics), it mainly focuses on the evaluation of the fundamental mechanisms and their implementation in processing optimization for different materials. It is of significant theoretical and practical value for guiding the fabrication of ultra-smooth and functional surfaces using ultra-precision machining.

Download or read book Ultra Precision Machining Technologies CJICUPM2008 written by Julong Yuan and published by Trans Tech Publications Ltd. This book was released on 2009-05-05 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume presents the very latest findings and ideas in the field of ultra-precision machining.

Download or read book Bearing Design in Machinery written by Avraham Harnoy and published by CRC Press. This book was released on 2002-09-25 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamental principles of bearing selection, design, and tribology, this book discusses basic physical principles of bearing selection, lubrication, design computations, advanced bearings materials, arrangement, housing, and seals, as well as recent developments in bearings for high-speed aircraft engines. The author explores unique solutions to challenging design problems and presents rare case studies, such as hydrodynamic and rolling-element bearings in series and adjustable hydrostatic pads for large bearings. He focuses on the design considerations and calculations specific to hydrodynamic journal bearings, hydrostatic bearings, and rolling element bearings.

Download or read book Materials Characterisation and Mechanism of Micro Cutting in Ultra Precision Diamond Turning written by Sandy Suet To and published by Springer. This book was released on 2017-05-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth study and elucidation on the mechanisms of the micro-cutting process, with particular emphasis and a novel viewpoint on materials characterization and its influences on ultra-precision machining. Ultra-precision single point diamond turning is a key technology in the manufacture of mechanical, optical and opto-electronics components with a surface roughness of a few nanometers and form accuracy in the sub-micrometric range. In the context of subtractive manufacturing, ultra-precision diamond turning is based on the pillars of materials science, machine tools, modeling and simulation technologies, etc., making the study of such machining processes intrinsically interdisciplinary. However, in contrast to the substantial advances that have been achieved in machine design, laser metrology and control systems, relatively little research has been conducted on the material behavior and its effects on surface finish, such as the material anisotropy of crystalline materials. The feature of the significantly reduced depth of cut on the order of a few micrometers or less, which is much smaller than the average grain size of work-piece materials, unavoidably means that conventional metal cutting theories can only be of limited value in the investigation of the mechanisms at work in micro-cutting processes in ultra-precision diamond turning.

Download or read book Proceedings of the 35th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2007-06-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 88 refereed papers given at the 35th MATADOR Conference held at the National University of Taiwan in Taipei, Taiwan in July 2007. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The proceedings of this conference contains original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications associated with: manufacturing processes; technology; system design and integration; and computer applications and management. The papers in this volume reflect: • the importance of manufacturing in international wealth creation; • the emerging fields of micro- and nano-manufacture; • the increasing trend towards the fabrication of parts using additive processes; • the growing demand for precision engineering and part inspection techniques; • measurement techniques and equipment.

Download or read book Maintenance of Aeronautical Antifriction Bearings written by United States. Bureau of Naval Weapons and published by . This book was released on 1965 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This material represents significant changes between the original D 202.6: 38 and the present D 217.14:B 38. The changes represented by D 202.6: 38/CHANGE/1 were partial additions to the original material.

Download or read book Machines Mechanism and Robotics written by Rajeev Kumar and published by Springer Nature. This book was released on 2021-07-21 with total page 1830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes select papers presented during the 4th International and 19th National Conference on Machines and Mechanism (iNaCoMM 2019), held in Indian Institute of Technology, Mandi. It presents research on various aspects of design and analysis of machines and mechanisms by academic and industry researchers.

Download or read book Proceedings of the Workshop on Microtechnologies and Applications to Space Systems written by and published by . This book was released on 1993 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Motorized Spindle Technology written by Yuhou Wu and published by Springer Nature. This book was released on 2020-02-22 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest information on the intelligent CNC machine tool spindle system, which integrates various disciplines such as mechanical engineering, control engineering, computer science and information technology. It describes a prediction method and model for temperature rise and thermal deformation in motorized spindles and proposes an intelligent stator resistance identification method to reduce the torque ripple of motorized spindles under direct torque control. Further, it discusses the on-line dynamic balance method for NC machine tool spindles. The biogeographic optimization algorithm and hybrid intelligent algorithm presented here were first applied in the field of motorized spindle performance control. In turn, the book presents extensive motorized spindle performance test data and includes detailed examples of how intelligent algorithms can be applied to motor spindle stator resistance identification, temperature field prediction and on-line dynamic balance. In summary, the book provides readers with the latest tools for designing, testing and implementing intelligent motorized spindle systems in terms of the basic theory, technological applications and future prospects, and offers a wealth of practical information for researchers in mechanical engineering, especially in the area of control systems.

Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.

Download or read book International Progress in Precision Engineering written by Fumiko Ikawa-Smith and published by Elsevier. This book was released on 1993-05-13 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Progress in Precision Engineering documents the proceedings of the 7th International Precision Engineering Seminar held in Kobe, Japan, May 1993. The seminar brought together the world's leading precision engineering practitioners from areas of application as diverse as sensors, actuators, scanning tip microscopy, micro and nano machining (including bio-machining), ultra precision measuring machines, machine tools, and large optics for space technology. The seminar included 10 oral sessions that dealt with the following topics: (I) Metrology - The Science Base For Precision Engineering; (II) Sensors and Actuators in Precision Engineering and Nanotechnology; (III) New Materials - Applications and Ultra-Precision Energy Beam Processing; (IV) Nanotechnology Machining Processes; (V) New Developments In Ultra-Precision Machines; (VI) Ultra-Precision, Servo, and Control Technology; (VII) Precision Engineering in Space Technology; (VIII) X-Ray Technologies and Their Applications; (IX) Micromechanics and Micrometrology; and (X) New Developments n Precision Engineering. There were also poster sessions and an introductory keynote speech by Dr. H. Mizuno, Executive Vice-President of Matsushita/Panasonic, who talks on the symbiotic relationship between electronics and precision engineering.

Download or read book Air Bearings written by Farid Al-Bender and published by John Wiley & Sons. This book was released on 2021-01-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive treatise on gas bearing theory, design and application This book treats the fundamental aspects of gas bearings of different configurations (thrust, radial, circular, conical) and operating principles (externally pressurized, self-acting, hybrid, squeeze), guiding the reader throughout the design process from theoretical modelling, design parameters, numerical formulation, through experimental characterisation and practical design and fabrication. The book devotes a substantial part to the dynamic stability issues (pneumatic hammering, sub-synchronous whirling, active dynamic compensation and control), treating them comprehensively from theoretical and experimental points of view. Key features: Systematic and thorough treatment of the topic. Summarizes relevant previous knowledge with extensive references. Includes numerical modelling and solutions useful for practical application. Thorough treatment of the gas-film dynamics problem including active control. Discusses high-speed bearings and applications. Air Bearings: Theory, Design and Applications is a useful reference for academics, researchers, instructors, and design engineers. The contents will help readers to formulate a gas-bearing problem correctly, set up the basic equations, solve them establishing the static and dynamic characteristics, utilise these to examine the scope of the design space of a given problem, and evaluate practical issues, be they in design, construction or testing.

Download or read book Supply Antifriction Bearing Commercial Symbols written by United States. Department of the Air Force and published by . This book was released on 1954 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: