Download or read book Ultra Low Voltage Design of Energy Efficient Digital Circuits written by Nele Reynders and published by Springer. This book was released on 2015-04-14 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on increasing the energy-efficiency of electronic devices so that portable applications can have a longer stand-alone time on the same battery. The authors explain the energy-efficiency benefits that ultra-low-voltage circuits provide and provide answers to tackle the challenges which ultra-low-voltage operation poses. An innovative design methodology is presented, verified, and validated by four prototypes in advanced CMOS technologies. These prototypes are shown to achieve high energy-efficiency through their successful functionality at ultra-low supply voltages.

Download or read book Ultra Low Input Power Conversion Circuits based on Tunnel FETs written by David Cavalheiro and published by CRC Press. This book was released on 2022-09-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand in electronic portability imposes low power consumption as a key metric to analog and digital circuit design. Tunnel FET (TFET) devices have been explored mostly in digital circuits, showing promising results for ultra-low power and energy efficient circuit applications. The TFET presents a low inverse sub-threshold slope (SS) that allows a low leakage energy consumption, desirable in many digital circuits, especially memories.In this book, the TFET is explored as an alternative technology also for ultra-low power and voltage conversion and management circuits, suitable for weak energy harvesting (EH) sources. The TFET distinct electrical characteristics under reverse bias conditions require changes in conventional circuit topologies. In this book, ultra-low input power conversion circuits based on TFETs are designed and analyzed, evaluating their performance as rectifiers, charge pumps and power management circuits (PMC) for RF and DC EH sources.

Download or read book Low Power Design Essentials written by Jan Rabaey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains all the topics of importance to the low power designer. It first lays the foundation and then goes on to detail the design process. The book also discusses such special topics as power management and modal design, ultra low power, and low power design methodology and flows. In addition, coverage includes projections of the future and case studies.

Download or read book Low Power CMOS Design written by Anantha Chandrakasan and published by Wiley-IEEE Press. This book was released on 1998-02-11 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of important papers provides a comprehensive overview of low-power system design, from component technologies and circuits to architecture, system design, and CAD techniques. LOW POWER CMOS DESIGN summarizes the key low-power contributions through papers written by experts in this evolving field.

Download or read book Ultra Low Power Bioelectronics written by Rahul Sarpeshkar and published by Cambridge University Press. This book was released on 2010-02-22 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides, for the first time, a broad and deep treatment of the fields of both ultra low power electronics and bioelectronics. It discusses fundamental principles and circuits for ultra low power electronic design and their applications in biomedical systems. It also discusses how ultra energy efficient cellular and neural systems in biology can inspire revolutionary low power architectures in mixed-signal and RF electronics. The book presents a unique, unifying view of ultra low power analog and digital electronics and emphasizes the use of the ultra energy efficient subthreshold regime of transistor operation in both. Chapters on batteries, energy harvesting, and the future of energy provide an understanding of fundamental relationships between energy use and energy generation at small scales and at large scales. A wealth of insights and examples from brain implants, cochlear implants, bio-molecular sensing, cardiac devices, and bio-inspired systems make the book useful and engaging for students and practicing engineers.

Download or read book Sub threshold Design for Ultra Low Power Systems written by Alice Wang and published by Springer Science & Business Media. This book was released on 2006-12-11 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the work of MIT graduate students Alice Wang and Benton Calhoun, this book surveys the field of sub-threshold and low-voltage design and explores such aspects of sub-threshold circuit design as modeling, logic and memory circuit design. One important chapter of the book is dedicated to optimizing energy dissipation - a key metric for energy constrained designs. This book also includes invited chapters on the subject of analog sub-threshold circuits.

Download or read book Low Power Circuits for Emerging Applications in Communications Computing and Sensing written by Fei Yuan and published by CRC Press. This book was released on 2018-12-07 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the need to investigate new approaches to lower energy requirement in multiple application areas and serves as a guide into emerging circuit technologies. It explores revolutionary device concepts, sensors, and associated circuits and architectures that will greatly extend the practical engineering limits of energy-efficient computation. The book responds to the need to develop disruptive new system architecutres, circuit microarchitectures, and attendant device and interconnect technology aimed at achieving the highest level of computational energy efficiency for general purpose computing systems. Features Discusses unique technologies and material only available in specialized journal and conferences Covers emerging applications areas, such as ultra low power communications, emerging bio-electronics, and operation in extreme environments Explores broad circuit operation, ex. analog, RF, memory, and digital circuits Contains practical applications in the engineering field, as well as graduate studies Written by international experts from both academia and industry

Download or read book Ultra Low Power Electronics and Design written by E. Macii and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power consumption is a key limitation in many high-speed and high-data-rate electronic systems today, ranging from mobile telecom to portable and desktop computing systems, especially when moving to nanometer technologies. Ultra Low-Power Electronics and Design offers to the reader the unique opportunity of accessing in an easy and integrated fashion a mix of tutorial material and advanced research results, contributed by leading scientists from academia and industry, covering the most hot and up-to-date issues in the field of the design of ultra low-power devices, systems and applications.

Download or read book Efficient Design of Variation Resilient Ultra Low Energy Digital Processors written by Hans Reyserhove and published by Springer. This book was released on 2019-03-27 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables readers to achieve ultra-low energy digital system performance. The author’s main focus is the energy consumption of microcontroller architectures in digital (sub)-systems. The book covers a broad range of topics extensively: from circuits through design strategy to system architectures. The result is a set of techniques and a context to realize minimum energy digital systems. Several prototype silicon implementations are discussed, which put the proposed techniques to the test. The achieved results demonstrate an extraordinary combination of variation-resilience, high speed performance and ultra-low energy.

Download or read book Ultra low Voltage Circuit Techniques for Energy Harvesting written by Rafael Luciano Radin and published by Springer Nature. This book was released on 2022-07-21 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design-oriented models for the implementation of ultra-low-voltage energy harvesting converters, covering the modeling of building blocks such oscillators, rectifiers, charge pumps and inductor-based converters that can operate with very low supply voltages, typically under 100 mV. Analyses based on the diode and MOSFET models are included in the text to allow the operation of energy harvesters from voltages of the order of 100 mV or much less, with satisfactory power efficiency. The practical realization of different converters is also addressed, clarifying the design trade-offs of ultra-low voltage (ULV) circuits operating from few millivolts. Offers readers a state-of-the-art revision for ultra-low voltage (ULV) energy harvesting converters; Provides analog IC designers with proper models for the implementation of circuits and building blocks of energy harvesters, such as oscillators, rectifiers, and inductor-based converters, operating under ultra-low voltages; Addresses the design of energy harvesters operating from ultra-low voltages, enabling autonomous operation of connected devices driven by human energy; Demonstrates design and implementation of integrated ULV up-converters; Includes semiconductor modeling for ULV operation.

Download or read book Adaptive Digital Circuits for Power Performance Range beyond Wide Voltage Scaling written by Saurabh Jain and published by Springer Nature. This book was released on 2020-02-27 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive coverage of digital design techniques to expand the power-performance tradeoff well beyond that allowed by conventional wide voltage scaling. Compared to conventional fixed designs, the approach described in this book makes digital circuits more versatile and adaptive, allowing simultaneous optimization at both ends of the power-performance spectrum. Drop-in solutions for fully automated and low-effort design based on commercial CAD tools are discussed extensively for processors, accelerators and on-chip memories, and are applicable to prominent applications (e.g., IoT, AI, wearables, biomedical). Through the higher power-performance versatility techniques described in this book, readers are enabled to reduce the design effort through reuse of the same digital design instance, across a wide range of applications. All concepts the authors discuss are demonstrated by dedicated testchip designs and experimental results. To make the results immediately usable by the reader, all the scripts necessary to create automated design flows based on commercial tools are provided and explained.

Download or read book Low Voltage Low Power Integrated Circuits and Systems written by Edgar Sánchez-Sinencio and published by Wiley-IEEE Press. This book was released on 1999-01-13 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering Low-Voltage/Low-Power Integrated Circuits and Systems Low-Voltage Mixed-Signal Circuits Leading experts in the field present this collection of original contributions as a practical approach to low-power analog and digital circuit theory and design, illustrated with important applications and examples. Low-Voltage/Low-Power Integrated Circuits and Systems features comprehensive coverage of the latest techniques for the design, modeling, and characterization of low-power analog and digital circuits. Low-Voltage/Low-Power Integrated Circuits and Systems will help you improve your understanding of the trade-offs between analog and digital circuits and systems. It is an invaluable resource for enhancing your designs. This book is intended for senior and graduate students. It is also intended as a key reference for designers in the semiconductor and communication industries. Highlighted applications include: Low-voltage analog filters Low-power multiplierless YUV to RGB based on human vision perception Micropower systems for implantable defibrillators and pacemakers Neuromorphic systems Low-power design in telecom circuits

Download or read book Ultra Low Power Integrated Circuit Design written by Nianxiong Nick Tan and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.

Download or read book Energy Efficient Computing Electronics written by Santosh K. Kurinec and published by CRC Press. This book was released on 2019-01-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: In our abundant computing infrastructure, performance improvements across most all application spaces are now severely limited by the energy dissipation involved in processing, storing, and moving data. The exponential increase in the volume of data to be handled by our computational infrastructure is driven in large part by unstructured data from countless sources. This book explores revolutionary device concepts, associated circuits, and architectures that will greatly extend the practical engineering limits of energy-efficient computation from device to circuit to system level. With chapters written by international experts in their corresponding field, the text investigates new approaches to lower energy requirements in computing. Features • Has a comprehensive coverage of various technologies • Written by international experts in their corresponding field • Covers revolutionary concepts at the device, circuit, and system levels

Download or read book Energy Efficient Technologies for the Dismounted Soldier written by National Research Council and published by National Academies Press. This book was released on 1997-12-30 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents electric power requirements for the dismounted soldier on future Army battlefields, describes advanced energy concepts, and provides an integrated assessment of technologies likely to affect limitations and needs in the future. It surveys technologies associated with both supply and demand including: energy sources and systems; low power electronics and design; communications, computers, displays, and sensors; and networks, protocols, and operations. Advanced concepts discussed are predicated on continued development by the Army of soldier systems similar to the Land Warrior system on which the committee bases its projections on energy use. Finally, the volume proposes twenty research objectives to achieve energy goals in the 2025 time frame.

Download or read book Extreme Low Power Mixed Signal IC Design written by Armin Tajalli and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design exibility and power consumption in addition to the cost, have always been the most important issues in design of integrated circuits (ICs), and are the main concerns of this research, as well. Energy Consumptions: Power dissipation (P ) and energy consumption are - diss pecially importantwhen there is a limited amountof power budgetor limited source of energy. Very common examples are portable systems where the battery life time depends on system power consumption. Many different techniques have been - veloped to reduce or manage the circuit power consumption in this type of systems. Ultra-low power (ULP) applications are another examples where power dissipation is the primary design issue. In such applications, the power budget is so restricted that very special circuit and system level design techniquesare needed to satisfy the requirements. Circuits employed in applications such as wireless sensor networks (WSN), wearable battery powered systems [1], and implantable circuits for biol- ical applications need to consume very low amount of power such that the entire system can survive for a very long time without the need for changingor recharging battery[2–4]. Using newpowersupplytechniquessuchas energyharvesting[5]and printable batteries [6], is another reason for reducing power dissipation. Devel- ing special design techniques for implementing low power circuits [7–9], as well as dynamic power management (DPM) schemes [10] are the two main approaches to control the system power consumption. Design Flexibility: Design exibility is the other important issue in modern in- grated systems.

Download or read book Ultra low Voltage Low Power Active RC Filters and Amplifiers for Low Energy RF Receivers written by Lucas Compassi Severo and published by Springer Nature. This book was released on 2021-12-04 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative strategies to implement ultra-low voltage (ULV) and low power active circuits used in low energy RF receivers. The authors demonstrate that the use of single-stage amplifiers with the input negative transconductance compensation is a key strategy to allow the operation at low voltage levels with reduced power dissipation. Also, some design methodologies, based on the CMOS transistor operation point, are analyzed and a powerful design methodology is described for this kind of circuit. Readers will be enabled to implement the techniques described to design communication circuits with low power dissipation, useful in a variety of applications, including IoT/IoE devices.