Download or read book Ultra low Voltage Circuit Techniques for Energy Harvesting written by Rafael Luciano Radin and published by Springer Nature. This book was released on 2022-07-21 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design-oriented models for the implementation of ultra-low-voltage energy harvesting converters, covering the modeling of building blocks such oscillators, rectifiers, charge pumps and inductor-based converters that can operate with very low supply voltages, typically under 100 mV. Analyses based on the diode and MOSFET models are included in the text to allow the operation of energy harvesters from voltages of the order of 100 mV or much less, with satisfactory power efficiency. The practical realization of different converters is also addressed, clarifying the design trade-offs of ultra-low voltage (ULV) circuits operating from few millivolts. Offers readers a state-of-the-art revision for ultra-low voltage (ULV) energy harvesting converters; Provides analog IC designers with proper models for the implementation of circuits and building blocks of energy harvesters, such as oscillators, rectifiers, and inductor-based converters, operating under ultra-low voltages; Addresses the design of energy harvesters operating from ultra-low voltages, enabling autonomous operation of connected devices driven by human energy; Demonstrates design and implementation of integrated ULV up-converters; Includes semiconductor modeling for ULV operation.

Download or read book Nano Devices and Circuit Techniques for Low Energy Applications and Energy Harvesting written by Chong-Min Kyung and published by Springer. This book was released on 2015-07-16 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of core technologies to address two of the most challenging issues in research for future IT platform development, namely innovative device design and reduction of energy consumption. Three key devices, the FinFET, the TunnelFET, and the electromechanical nanoswitch are described with extensive details of use for practical applications. Energy issues are also covered in a tutorial fashion from material physics, through device technology, to innovative circuit design. The strength of this book lies in its holistic approach dealing with material trends, state-of-the-art of key devices, new examples of circuits and systems applications. This is the first of three books based on the Integrated Smart Sensors research project, which describe the development of innovative devices, circuits, and system-level enabling technologies. The aim of the project was to develop common platforms on which various devices and sensors can be loaded, and to create systems offering significant improvements in information processing speed, energy usage, and size. The book contains extensive reference lists and with over 200 figures introduces the reader to the general subject in a tutorial style, also addressing the state-of-the-art, allowing it to be used as a guide for starting researchers in these fields.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Ultra Low Input Power Conversion Circuits based on Tunnel FETs written by David Cavalheiro and published by CRC Press. This book was released on 2022-09-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand in electronic portability imposes low power consumption as a key metric to analog and digital circuit design. Tunnel FET (TFET) devices have been explored mostly in digital circuits, showing promising results for ultra-low power and energy efficient circuit applications. The TFET presents a low inverse sub-threshold slope (SS) that allows a low leakage energy consumption, desirable in many digital circuits, especially memories.In this book, the TFET is explored as an alternative technology also for ultra-low power and voltage conversion and management circuits, suitable for weak energy harvesting (EH) sources. The TFET distinct electrical characteristics under reverse bias conditions require changes in conventional circuit topologies. In this book, ultra-low input power conversion circuits based on TFETs are designed and analyzed, evaluating their performance as rectifiers, charge pumps and power management circuits (PMC) for RF and DC EH sources.

Download or read book Ultra Low Voltage Design of Energy Efficient Digital Circuits written by Nele Reynders and published by Springer. This book was released on 2015-04-14 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on increasing the energy-efficiency of electronic devices so that portable applications can have a longer stand-alone time on the same battery. The authors explain the energy-efficiency benefits that ultra-low-voltage circuits provide and provide answers to tackle the challenges which ultra-low-voltage operation poses. An innovative design methodology is presented, verified, and validated by four prototypes in advanced CMOS technologies. These prototypes are shown to achieve high energy-efficiency through their successful functionality at ultra-low supply voltages.

Download or read book CMOS Circuits for Electromagnetic Vibration Transducers written by Dominic Maurath and published by Springer. This book was released on 2014-09-16 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chip-integrated power management solutions are a must for ultra-low power systems. This enables not only the optimization of innovative sensor applications. It is also essential for integration and miniaturization of energy harvesting supply strategies of portable and autonomous monitoring systems. The book particularly addresses interfaces for energy harvesting, which are the key element to connect micro transducers to energy storage elements. Main features of the book are: - A comprehensive technology and application review, basics on transducer mechanics, fundamental circuit and control design, prototyping and testing, up to sensor system supply and applications. - Novel interfacing concepts - including active rectifiers, MPPT methods for efficient tracking of DC as well as AC sources, and a fully-integrated charge pump for efficient maximum AC power tracking at sub-100μW ultra-low power levels. The chips achieve one of widest presented operational voltage range in standard CMOS technology: 0.44V to over 4.1V. - Two special chapters on analog circuit design – it studies benefits and obstacles on implemented chip prototypes with three goals: ultra- low power, wide supply voltage range, and integration with standard technologies. Alternative design approaches are pursued using bulk-input transistor stages in forward-bias operation for amplifiers, modulators, and references. - Comprehensive Appendix – with additional fundamental analysis, design and scaling guidelines, circuit implementation tables and dimensions, schematics, source code listings, bill of material, etc. The discussed prototypes and given design guidelines are tested with real vibration transducer devices. The intended readership is graduate students in advanced courses, academics and lecturers, R&D engineers.

Download or read book Internally Compensated LDO Regulators for Modern System on Chip Design written by José María Hinojo and published by Springer. This book was released on 2018-04-19 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a thorough state-of-the-art review for internally compensated Low Dropout Regulators (IC-LDO). It serves as a useful guide for circuit designers. The advantages and disadvantages of each cell proposed are highlighted. The authors describe an alternative to the classical topology; the Flipped Voltage Follower (FVF), which has been recently applied in the design of internally compensated LDOs to enhance their performances. This book provides novel circuits enhancing those parameters of LDO related with frequency behavior and power consumption. These solutions, as well as their appropriate design methodology, are properly described within the text.

Download or read book Low Power Analog Techniques Sensors for Mobile Devices and Energy Efficient Amplifiers written by Kofi A. A. Makinwa and published by Springer. This book was released on 2019-01-28 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 invited tutorials presented during the 27th workshop on Advances in Analog Circuit Design. Expert designers from both industry and academia present readers with information about a variety of topics at the frontiers of analog circuit design, including the design of analog circuits in power-constrained applications, CMOS-compatible sensors for mobile devices and energy-efficient amplifiers and drivers. For anyone involved in the design of analog circuits, this book will serve as a valuable guide to the current state-of-the-art. Provides a state-of-the-art reference in analog circuit design, written by experts from industry and academia; Presents material in a tutorial-based format; Covers the design of analog circuits in power-constrained applications, CMOS-compatible sensors for mobile devices and energy-efficient amplifiers and drivers.

Download or read book Advances in Energy Harvesting Methods written by Niell Elvin and published by Springer Science & Business Media. This book was released on 2013-02-15 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Energy Harvesting Methods presents a state-of-the-art understanding of diverse aspects of energy harvesting with a focus on: broadband energy conversion, new concepts in electronic circuits, and novel materials. This book covers recent advances in energy harvesting using different transduction mechanisms; these include methods of performance enhancement using nonlinear effects, non-harmonic forms of excitation and non-resonant energy harvesting, fluidic energy harvesting, and advances in both low-power electronics as well as material science. The contributors include a brief literature review of prior research with each chapter for further reference.

Download or read book Efficient Design of Variation Resilient Ultra Low Energy Digital Processors written by Hans Reyserhove and published by Springer. This book was released on 2019-03-27 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables readers to achieve ultra-low energy digital system performance. The author’s main focus is the energy consumption of microcontroller architectures in digital (sub)-systems. The book covers a broad range of topics extensively: from circuits through design strategy to system architectures. The result is a set of techniques and a context to realize minimum energy digital systems. Several prototype silicon implementations are discussed, which put the proposed techniques to the test. The achieved results demonstrate an extraordinary combination of variation-resilience, high speed performance and ultra-low energy.

Download or read book ULTRA LOW POWER ANALOG INTEGRATED CIRCUITS BEYOND CMOS written by Mohd Yasir and published by Mohd Yasir. This book was released on 2023-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book would provide an in-depth analysis of the latest developments and innovations in the field of ultra low power analog integrated circuits. The book would start by introducing the concept of low power consumption and energy harvesting, and how it is becoming increasingly important in the era of the Internet of Things (IoT) and wearable devices. It would then cover various topics such as body biasing, threshold voltage tuning, subthreshold circuits, and tunneling FETs, and how they are used to achieve low power operation. The book would also delve into the use of new materials and device structures, such as MEMS-based devices, carbon nanotube FETs, graphene FETs, spin FETs, ambipolar transistors, and biologically inspired circuits. Additionally, the book would explore the challenges posed by hybrid analog-digital circuits and low voltage operation, and provide techniques for analog power gating, low voltage data converters, and on-chip energy storage. The book would also provide guidance on the design and implementation of non-volatile analog circuits and hybrid CMOS-memristor circuits. The book would be aimed at electrical engineers, integrated circuit designers, and researchers in the field of low power analog integrated circuits. The book would provide a comprehensive and cutting-edge approach to ultra low power analog integrated circuits, equipping readers with the knowledge and skills necessary to tackle the latest challenges and innovations in the field. Analog circuit design is going in the direction of Low Voltage and Low Power application requirements of portable devices like mobiles, laptops, pacemakers, etc. As the fabrication technology scaling continues, the supply voltage must be reduced to reduce electric field across the channel to prevent oxide breakdown . However, this pattern brings additional disadvantages, as downscaled process node endures the random fluctuation of process parameters, voltage and temperature sensitivity (PVT) . The dimensions of the recent transistors are so low that it is now become challenging to prevent many issues such as scattering effect, decreased gate control over drain current (ID), parasitics, random dopant fluctuation, channel mobility, lithographic limitations, the threshold voltage (VTH) variability, drain to source tunneling, increased heat production and increased gate oxide as well as junction leakage, etc. The minimum supply voltage (VDD) in CMOS is much higher at nanometer technology node. With the requirement of highly down-scaled transistors in state-of-the- art ICs, lower power consumption, high performance and battery-operated systems, at nanometer technology node, CMOS faces many short channel effects (SCEs) like Drain Induced Barrier Lowering (DIBL), Gate Induced Drain Leakage (GIDL), process variations, etc., because of which the maximum usable frequency is reduced

Download or read book Ultra Low Power ECG Processing System for IoT Devices written by Temesghen Tekeste Habte and published by Springer. This book was released on 2018-09-06 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book describes an ECG processing architecture that guides biomedical SoC developers, from theory to implementation and testing. The authors provide complete coverage of the digital circuit implementation of an ultra-low power biomedical SoC, comprised of a detailed description of an ECG processor implemented and fabricated on chip. Coverage also includes the challenges and tradeoffs of designing ECG processors. Describes digital circuit architecture for implementing ECG processing algorithms on chip; Includes coverage of signal processing techniques for ECG processing; Features ultra-low power circuit design techniques; Enables design of ECG processing architectures and their respective on-chip implementation.

Download or read book Ultra Low Power Short Range Radios written by Patrick P. Mercier and published by Springer. This book was released on 2015-07-21 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design of ultra-low-power radio-frequency integrated circuits (RFICs), with communication distances ranging from a few centimeters to a few meters. The authors describe leading-edge techniques to achieve ultra-low-power communication over short-range links. Many different applications are covered, ranging from body-area networks to transcutaneous implant communications and smart-appliance sensor networks. Various design techniques are explained to facilitate each of these applications.

Download or read book Ultra Low Power Wireless Technologies for Sensor Networks written by Brian Otis and published by Springer Science & Business Media. This book was released on 2007-02-24 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for academic and professional researchers designing communication systems for pervasive and low power applications. There is an introduction to wireless sensor networks, but the main emphasis of the book is on design techniques for low power, highly integrated transceivers. Instead of presenting a single design perspective, this book presents the design philosophies from three diverse research groups, providing three completely different strategies for achieving similar goals. By presenting diverse perspectives, this book prepares the reader for the countless design decisions they will be making in their own designs.

Download or read book Chips 2020 written by Bernd Hoefflinger and published by Springer Science & Business Media. This book was released on 2012-01-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chips in present-day cell phones already contain billions of sub-100-nanometer transistors. By 2020, however, we will see systems-on-chips with trillions of 10-nanometer transistors. But this will be the end of the miniaturization, because yet smaller transistors, containing just a few control atoms, are subject to statistical fluctuations and thus no longer useful. We also need to worry about a potential energy crisis, because in less than five years from now, with current chip technology, the internet alone would consume the total global electrical power! This book presents a new, sustainable roadmap towards ultra-low-energy (femto-Joule), high-performance electronics. The focus is on the energy-efficiency of the various chip functions: sensing, processing, and communication, in a top-down spirit involving new architectures such as silicon brains, ultra-low-voltage circuits, energy harvesting, and 3D silicon technologies. Recognized world leaders from industry and from the research community share their views of this nanoelectronics future. They discuss, among other things, ubiquitous communication based on mobile companions, health and care supported by autonomous implants and by personal carebots, safe and efficient mobility assisted by co-pilots equipped with intelligent micro-electromechanical systems, and internet-based education for a billion people from kindergarden to retirement. This book should help and interest all those who will have to make decisions associated with future electronics: students, graduates, educators, and researchers, as well as managers, investors, and policy makers. Introduction: Towards Sustainable 2020 Nanoelectronics.- From Microelectronics to Nanoelectronics.- The Future of Eight Chip Technologies.- Analog–Digital Interfaces.- Interconnects and Transceivers.- Requirements and Markets for Nanoelectronics.- ITRS: The International Technology Roadmap for Semiconductors.- Nanolithography.- Power-Efficient Design Challenges.- Superprocessors and Supercomputers.- Towards Terabit Memories.- 3D Integration for Wireless Multimedia.- The Next-Generation Mobile User-Experience.- MEMS (Micro-Electro-Mechanical Systems) for Automotive and Consumer.- Vision Sensors and Cameras.- Digital Neural Networks for New Media.- Retinal Implants for Blind Patients.- Silicon Brains.- Energy Harvesting and Chip Autonomy.- The Energy Crisis.- The Extreme-Technology Industry.- Education and Research for the Age of Nanoelectronics.- 2020 World with Chips.

Download or read book Electrical and Electronic Devices Circuits and Materials written by Suman Lata Tripathi and published by John Wiley & Sons. This book was released on 2021-03-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for electronic devices for private and industrial purposes lead designers and researchers to explore new electronic devices and circuits that can perform several tasks efficiently with low IC area and low power consumption. In addition, the increasing demand for portable devices intensifies the call from industry to design sensor elements, an efficient storage cell, and large capacity memory elements. Several industry-related issues have also forced a redesign of basic electronic components for certain specific applications. The researchers, designers, and students working in the area of electronic devices, circuits, and materials sometimesneed standard examples with certain specifications. This breakthrough work presents this knowledge of standard electronic device and circuit design analysis, including advanced technologies and materials. This outstanding new volume presents the basic concepts and fundamentals behind devices, circuits, and systems. It is a valuable reference for the veteran engineer and a learning tool for the student, the practicing engineer, or an engineer from another field crossing over into electrical engineering. It is a must-have for any library.

Download or read book VLSI SoC At the Crossroads of Emerging Trends written by Alex Orailoglu and published by Springer. This book was released on 2015-09-25 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 21st IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2013, held in Istanbul, Turkey, in October 2013. The 11 papers included in the book were carefully reviewed and selected from the 48 full papers presented at the conference. An extended version of a previously unpublished high-quality paper from VLSI-SoC 2012 is also included. The papers cover a wide range of topics in VLSI technology and advanced research. They address the current trend toward increasing chip integration and technology process advancements bringing about stimulating new challenges both at the physical and system-design levels, as well as in the test of these systems.