Download or read book Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The present study is addressed to the theoretical description of the ultimate gradient limitation in SRF cavities. Our intent is to exploit experimental data to confirm models which provide feed-backs on how to improve the current state-of-art. New theoretical insight on the cavities limiting factor can be suitable to improve the quench field of N-doped cavities, and therefore to take advantage of high Q0 at high gradients.
Download or read book Handbook of Applied Superconductivity Volume 2 written by B Seeber and published by CRC Press. This book was released on 1998-01-01 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Applied Superconductivity, Two-Volume Set covers all important aspects of applied superconductivity and the supporting low-temperature technologies. The handbook clearly demonstrates the capabilities of superconducting technologies and illustrates how to implement these technologies in new areas of academic and industrial research and development. Volume One provides an introduction to the theoretical background of both low and high Tc superconductivity, followed by details of the basic hardware such as wires, tapes, and cables used in applications of superconductivity and the necessary supporting science and technology. Theoretical discussions are in most cases followed by examples of real designs, fabrication techniques, and practical instrumentation guidance. A final chapter examines materials properties at low temperatures. Volume Two provides examples of current and future applications of superconductivity. It covers medical systems for magnetic resonance imaging (MRI), high field magnets for research, superconducting magnets for accelerators, industrial systems for magnetic separation, and transportation systems. The final chapters look to future applications in power and superconducting electronics. With fully referenced, peer-refereed contributions from experts in various fields, this two-volume work is an essential reference for a wide range of scientists and engineers in academic and industrial research and development environments.
Download or read book New Insights Into the Limitations on the Efficiency and Achievable Gradients in Nb3Sn SRF Cavities written by Daniel Leslie Hall and published by . This book was released on 2017 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The A15 superconductor Nb3Sn has shown great promise to replace niobium as the material of choice for the construction of superconducting radio-frequency (SRF) accelerator cavities. It promises, at least on paper, greater efficiency and higher accelerating gradients, with the potential to enable the construction of smaller yet more powerful accelerators than can be constructed using niobium. Although the state-of-the-art performance of cavities coated with Nb3Sn has shown great potential, the achievable limits in cavity quality factor Q0 and accelerating gradient Eacc are still below that expected given theoretical limits. In this work we present and discuss results of experiments carried out to understand the current limitations on Q0 and Eacc, and propose methods to improve these further. We will conclude with an outlook to the future, and the prospects that Nb3Sn could enable.
Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-01-22 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.
Download or read book High Gradient Superconducting Niobium Cavities written by Peter Kneisel and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.
Download or read book Particle Physics Reference Library written by Stephen Myers and published by Springer Nature. This book was released on 2020-01-01 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third open access volume of the handbook series deals with accelerator physics, design, technology and operations, as well as with beam optics, dynamics and diagnostics. A joint CERN-Springer initiative, the "Particle Physics Reference Library" provides revised and updated contributions based on previously published material in the well-known Landolt-Boernstein series on particle physics, accelerators and detectors (volumes 21A,B1,B2,C), which took stock of the field approximately one decade ago. Central to this new initiative is publication under full open access.
Download or read book Reviews of Accelerator Science and Technology written by Alexander W. Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to superconducting technology and its applications, including superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities.
Download or read book Reviews Of Accelerator Science And Technology Volume 10 The Future Of Accelerators written by Chao Alexander Wu and published by World Scientific. This book was released on 2019-09-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 10 in the series of the annual journal Reviews of Accelerator Science and Technology (RAST), will be its final volume. Its theme is 'The Future of Accelerators'. This volume, together with previous 9 volumes, gives readers a complete picture as well as detailed technical information about the accelerator field, and its many driving and fascinating aspects.This volume has 17 articles. The first 15 articles have a different approach from the previous volumes. They emphasize the more personal views, perspectives and advice from the frontier researchers rather than provide a review or survey of a specific subfield. This emphasis is more aligned with the theme of the current volume. The other two articles are dedicated respectively to Leon Lederman and Burton Richter, two prominent leaders of our community who left us last year.
Download or read book Reviews Of Accelerator Science And Technology Volume 5 Applications Of Superconducting Technology To Accelerators written by Alexander Wu Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several decades major advances in accelerators have resulted from breakthroughs in accelerator science and accelerator technology. After the introduction of a new accelerator physics concept or the implementation of a new technology, a leap in accelerator performance followed. A well-known representation of these advances is the Livingston chart, which shows an exponential growth of accelerator performance over the last seven or eight decades. One of the breakthrough accelerator technologies that support this exponential growth is superconducting technology. Recognizing this major technological advance, we dedicate Volume 5 of Reviews of Accelerator Science and Technology (RAST) to superconducting technology and its applications.Two major applications are superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities. SC magnets provide much higher magnetic field than their room-temperature counterparts, thus allowing accelerators to reach higher energies with comparable size as well as much reduced power consumption. SRF technology allows field energy storage for continuous wave applications and energy recovery, in addition to the advantage of tremendous power savings and better particle beam quality. In this volume, we describe both technologies and their applications. We also include discussion of the associated R&D in superconducting materials and the future prospects for these technologies.
Download or read book Superconducting Radiofrequency Technology for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2023-03-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting Radiofrequency Technology for Accelerators Single source reference enabling readers to understand and master state-of-the-art accelerator technology Superconducting Radiofrequency Technology for Accelerators provides a quick yet thorough overview of the key technologies for current and future accelerators, including those projected to enable breakthrough developments in materials science, nuclear and astrophysics, high energy physics, neutrino research and quantum computing. The work is divided into three sections. The first part provides a review of RF superconductivity basics, the second covers new techniques such as nitrogen doping, nitrogen infusion, oxide-free niobium, new surface treatments, and magnetic flux expulsion, high field Q slope, complemented by discussions of the physics of the improvements stemming from diagnostic techniques and surface analysis as well as from theory. The third part reviews the on-going applications of RF superconductivity in already operational facilities and those under construction such as light sources, proton accelerators, neutron and neutrino sources, ion accelerators, and crab cavity facilities. The third part discusses planned accelerator projects such as the International Linear Collider, the Future Circular Collider, the Chinese Electron Positron Collider, and the Proton Improvement Plan-III facility at Fermilab as well as exciting new developments in quantum computing using superconducting niobium cavities. Written by the leading expert in the field of radiofrequency superconductivity, Superconducting Radiofrequency Technology for Accelerators covers other sample topics such as: Fabrication and processing on Nb-based SRF structures, covering cavity fabrication, preparation, and a decade of progress in the field SRF physics, covering zero DC resistance, the Meissner effect, surface resistance and surface impedance in RF fields, and non-local response of supercurrent N-doping and residual resistance, covering trapped DC flux losses, hydride losses, and tunneling measurements Theories for anti-Q-slope, covering the Xiao theory, the Gurevich theory, non-equilibrium superconductivity, and two fluid model based on weak defects Superconducting Radiofrequency Technology for Accelerators is an essential reference for high energy physicists, power engineers, and electrical engineers who want to understand the latest developments of accelerator technology and be able to harness it to further research interest and practical applications.
Download or read book Superconducting Technology 10 Case Studies written by K Fossheim and published by World Scientific. This book was released on 1991-07-22 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an interdisciplinary selection of timely articles which cover a wide range of superconducting technologies ranging from high tech medicine (10-12 Gauss) to multipurpose sensors, microwaves, radio engineering, magnet technology for accelerators, magnetic energy storage, and power transmission on the 109 watt scale. It is aimed primarily at the non-specialist and will be suitable as an introductory course book for those in the relevant fields and related industries. As shown in the title several examples of high-Tc applications are included. While low-Tc is still the leading technology, for instance, in cables and SQUIDS, case studies in these areas are presented.
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book Superconducting Properties of Niobium Radio frequency Cavities written by Gianluigi Ciovati and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting radio-frequency (SRF) cavities are used to increase the energy of a charged particle beam in particle accelerators throughout the world. Bulk niobium is the material of choice to fabricate SRF cavities and their performance at cryogenic temperatures is characterized by a non-linearity of the surface resistance as a function of the RF field, in absence of field emission, which limits the operational accelerating gradient. This book presents the results on the investigation of such non-linearity in cavities which received different surface and bulk treatments as well as cavities made of single-crystal niobium. The experimental methods include measurements of the surface impedance as a function of temperature, of the quality factor as a function of the RF field below 4.2 K, and the excitation of different resonant modes. A thermometry system was used to better characterize the loss mechanisms. This book consists of the author's PhD dissertation at Old Dominion University (ODU) under the supervision of Prof. Colm T. Whelan of ODU and Dr. Peter Kneisel of Jefferson Lab. This book should be useful to students or young researchers in the field of SRF for accelerators.
Download or read book Development of High Gradient L Band Superconducting Cavities written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1990, the development of L-band superconducting niobium cavities for high gradient applications has been pursued at KEK. In the latest tests of 1.3 GHz single-cell cavities, the maximum accelerating gradients of more than 20 MV/m were attained with Q0 values of -2 x 101° at 1.9K. This paper reports results of measurements on several single-cell cavities and the fabrication of the first 9-cell structure.
Download or read book Superconducting Niobium Cavities with High Gradients August 1992 written by Peter Kneisel and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EPAC 92 written by H. Henke and published by Atlantica Séguier Frontières. This book was released on 1992 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:
