Download or read book The Building Regulations written by M. J. Billington and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition in 1976, The Building Regulations: Explained and Illustrated has provided a detailed, authoritative, highly illustrated and accessible guide to the regulations that must be adhered to when constructing, altering or extending a building in England and Wales. This latest edition has been fully revised throughout. Much of the content has been completely rewritten to cover the substantial changes to the Regulations since publication of the 13th edition, to ensure it continues to provide the detailed guidance needed by all those concerned with building work, including architects, building control officers, Approved Inspectors, Competent Persons, building surveyors, engineers, contractors and students in the relevant disciplines.
Download or read book Steel Designers Manual written by SCI (Steel Construction Institute) and published by John Wiley & Sons. This book was released on 2016-06-27 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).
Download or read book UK National Annex to Eurocode 3 Design of Steel Structures Crane Supporting Structures written by British Standards Institute Staff and published by . This book was released on 2009-11-30 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels, Buildings, Structures, Structural systems, Construction engineering works, Structural design, Mathematical calculations, Cranes, Beams, Structural members, Rails (materials handling equipment), Tracks (materials handling equipment), Overhead, Travelling cranes, Loading, Plastic analysis, Mechanical properties of materials, Verification, Fasteners, Joints
Download or read book Design of Joints in Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2017-06-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.
Download or read book Eurocode 3 Design of Steel Structures Crane Supporting Structures written by British Standards Institute Staff and published by . This book was released on 2007-07-31 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels, Buildings, Structures, Structural systems, Construction engineering works, Structural design, Mathematical calculations, Cranes, Beams, Structural members, Rails (materials handling equipment), Tracks (materials handling equipment), Overhead, Travelling cranes, Loading, Plastic analysis, Mechanical properties of materials, Verification, Fasteners, Joints
Download or read book Design of Plated Structures written by Darko Beg and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to provide practical advice to designers of plated structures for correct and efficient application of EN 1993-1-5 design rules. In chapter 1 the purpose, the scope and the structure of the book is explained. In chapter 2 a rather detailed and commented overview of EN 1993-1-5 design rules is given following the structure of the standard. Shear lag effect as well as plate buckling problems due to direct stresses, shear forces, transverse forces and interactions of these effects are covered. This chapter also includes a reduced stress method and a finite element analysis approach to plate buckling problems. A large number of design examples illustrate the proper application of individual design rules. Chapter 3 and 4 bring two complete design examples on a crane runway and a box-girder bridge.
Download or read book Design of Steel Portal Frame Buildings to Eurocode 3 written by and published by . This book was released on 2015 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Structures written by Luís Simões da Silva and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.
Download or read book Steel Building Design written by M. E. Brettle and published by . This book was released on 2009 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Download or read book Designing Steel Structures for Fire Safety written by Jean Marc Franssen and published by CRC Press. This book was released on 2009-05-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural design in fire conditions is conceptually similar to structural design in normal temperature conditions, but often more difficult because of internal forces induced by thermal expansion, strength reduction due to elevated temperatures, much larger deflections, and numerous other factors. Before making any design decisions it is esse
Download or read book Steel Structures written by Rolf Kindmann and published by John Wiley & Sons. This book was released on 2012-03-07 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of steel structures using finite element methods (FEM) according to the current state of the art in Germany and the rest of Europe. After a short introduction on the basics of the design, this book illustrates the FEM with a focus on internal forces, displacements, critical loads and modal shapes. Next to finite element procedures for linear calculations considering the stress states of normal force, biaxial bending and warping torsion, non-linear calculations and the stability cases of flexural buckling, lateral torsional buckling and plate buckling are concentrated on significantly. In this context, design procedures for stability according to the standard Eurocode 3 is introduced and discussed. In addition, important fundamental issues are covered, such as the determination of cross-section properties as well as the elastic and plastic cross-section resistance. Complementary, finite element procedures for cross sections are dealt with, which will have an increasing importance in future. This book has evolved within the teaching activities of the authors in the lecture Computer-oriented Design of Steel Structures on the Master?s Program Computational Engineering at the University of Bochum. It covers the total variety of demands needed to be discussed for the safe, economic and modern design of steel structures.
Download or read book Design of Steel Beams in Torsion written by A. F. Hughes and published by . This book was released on 2011 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.
Download or read book Design of Structural Elements written by Chanakya Arya and published by CRC Press. This book was released on 2009-05-07 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.
Download or read book Steel Building Design written by M. E. Brettle and published by . This book was released on 2008 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual for the Design of Steelwork Building Structures to EC3 written by and published by . This book was released on 2000 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:
