Download or read book Type Synthesis of Parallel Mechanisms written by Xianwen Kong and published by Springer. This book was released on 2007-10-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique monograph focuses on the systematic type synthesis of parallel mechanisms (PMs), a key issue in the creative design of a wide variety of innovative devices such as parallel manipulators, motion simulators, and haptic devices. Essential reading for researchers, developers, engineers and graduate students with interests in robotics, this book covers the classification of PMs as well as providing a large number of PMs ready to be used in practical applications.
Download or read book Theory of Parallel Mechanisms written by Zhen Huang and published by Springer Science & Business Media. This book was released on 2012-07-26 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains mechanism analysis and synthesis. In mechanism analysis, a mobility methodology is first systematically presented. This methodology, based on the author's screw theory, proposed in 1997, of which the generality and validity was only proved recently, is a very complex issue, researched by various scientists over the last 150 years. The principle of kinematic influence coefficient and its latest developments are described. This principle is suitable for kinematic analysis of various 6-DOF and lower-mobility parallel manipulators. The singularities are classified by a new point of view, and progress in position-singularity and orientation-singularity is stated. In addition, the concept of over-determinate input is proposed and a new method of force analysis based on screw theory is presented. In mechanism synthesis, the synthesis for spatial parallel mechanisms is discussed, and the synthesis method of difficult 4-DOF and 5-DOF symmetric mechanisms, which was first put forward by the author in 2002, is introduced in detail. Besides, the three-order screw system and its space distribution of the kinematic screws for infinite possible motions of lower mobility mechanisms are both analyzed.
Download or read book Geometric Method for Type Synthesis of Parallel Manipulators written by Qinchuan Li and published by Springer. This book was released on 2019-07-03 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the synthesis of lower-mobility parallel manipulators, presenting a group-theory-based method that has the advantage of being geometrically intrinsic. Rotations and translations of a rigid body as well as a combination of the two can be expressed and handled elegantly using the group algebraic structure of the set of rigid-body displacements. The book gathers the authors’ research results, which were previously scattered in various journals and conference proceedings, presenting them in a unified form. Using the presented method, it reveals numerous novel architectures of lower-mobility parallel manipulators, which are of interest to those in the robotics community. More importantly, readers can use the method and tool to develop new types of lower-mobility parallel manipulators independently.
Download or read book Parallel Robots written by J.P. Merlet and published by Springer. This book was released on 2000-07-31 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, rigidity and ability to manipulate large loads. Parallel robots have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 100 exercises and numerous Internet addresses), researchers (with over 500 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results and applications are presented).
Download or read book Finite and Instantaneous Screw Theory in Robotic Mechanism written by Tao Sun and published by Springer Nature. This book was released on 2020-02-13 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a finite and instantaneous screw theory for the development of robotic mechanisms. It addresses the analytical description and algebraic computation of finite motion, resulting in a generalized type synthesis approach. It then discusses the direct connection between topology and performance models, leading to an integrated performance analysis and design framework. The book then explores parameter uncertainty and multiple performance requirements for reliable, optimal design methods, and describes the error accumulation principle and parameter identification algorithm, to increase robot accuracy. It proposes a unified and generic methodology, and appliesto the invention, analysis, design, and calibration of robotic mechanisms. The book is intended for researchers, graduate students and engineers in the fields of robotic mechanism and robot design and applications./div
Download or read book Annals of Scientific Society for Assembly Handling and Industrial Robotics 2021 written by Thorsten Schüppstuhl and published by Springer Nature. This book was released on 2021 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI). The Editors Prof. Dr.-Ing. Thorsten Schüppstuhl is head of the Institute of Aircraft Production Technology (IFPT) at the Hamburg University of Technology. Prof. Dr.-Ing. Kirsten Tracht is head of the Bremen Institute for Mechanical Engineering (bime) at the University of Bremen. Prof. Dr.-Ing. Annika Raatz is head of the Institute of Assembly Technology (match) at the Leibniz University Hannover.
Download or read book Cable Driven Parallel Robots written by Tobias Bruckmann and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering presentations to the First International Conference on Cable-Driven Parallel Robots, this book covers classification and definition, kinematics, workspace analysis, cable modeling, hardware/prototype development, control and calibration and more.
Download or read book Advances in Robot Kinematics written by Jadran Lenarčič and published by Springer. This book was released on 2014-05-19 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics addressed in this book cover the whole range of kinematic analysis, synthesis and design and consider robotic systems possessing serial, parallel and cable driven mechanisms. The robotic systems range from being less than fully mobile to kinematically redundant to over constrained. The fifty-six contributions report the latest results in robot kinematics with emphasis on emerging areas such as design and control of humanoids or humanoid subsystems. The book is of interest to researchers wanting to bring their knowledge up to date regarding modern topics in one of the basic disciplines in robotics, which relates to the essential property of robots, the motion of mechanisms.
Download or read book Introduction to Mechanism Design written by Eric Constans and published by CRC Press. This book was released on 2018-07-20 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mechanism Design: with Computer Applications provides an updated approach to undergraduate Mechanism Design and Kinematics courses/modules for engineering students. The use of web-based simulations, solid modeling, and software such as MATLAB and Excel is employed to link the design process with the latest software tools for the design and analysis of mechanisms and machines. While a mechanical engineer might brainstorm with a pencil and sketch pad, the final result is developed and communicated through CAD and computational visualizations. This modern approach to mechanical design processes has not been fully integrated in most books, as it is in this new text.
Download or read book Design and Analysis of Mechanisms written by Michael J. Rider and published by John Wiley & Sons. This book was released on 2015-07-07 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: A planar or two-dimensional (2D) mechanism is the combination of two or more machine elements that are designed to convey a force or motion across parallel planes. For any mechanical engineer, young or old, an understanding of planar mechanism design is fundamental. Mechanical components and complex machines, such as engines or robots, are often designed and conceptualised in 2D before being extended into 3D. Designed to encourage a clear understanding of the nature and design of planar mechanisms, this book favours a frank and straightforward approach to teaching the basics of planar mechanism design and the theory of machines with fully worked examples throughout. Key Features: Provides simple instruction in the design and analysis of planar mechanisms, enabling the student to easily navigate the text and find the desired material Covers topics of fundamental importance to mechanical engineering, from planar mechanism kinematics, 2D linkage analyses and 2D linkage design to the fundamentals of spur gears and cam design Shows numerous example solutions using EES (Engineering Equation Solver) and MATLAB software, with appendices dedicated to explaining the use of both computer tools Follows end-of-chapter problems with clearly detailed solutions
Download or read book High level Synthesis written by Michael Fingeroff and published by Xlibris Corporation. This book was released on 2010 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are you an RTL or system designer that is currently using, moving, or planning to move to an HLS design environment? Finally, a comprehensive guide for designing hardware using C++ is here. Michael Fingeroff's High-Level Synthesis Blue Book presents the most effective C++ synthesis coding style for achieving high quality RTL. Master a totally new design methodology for coding increasingly complex designs! This book provides a step-by-step approach to using C++ as a hardware design language, including an introduction to the basics of HLS using concepts familiar to RTL designers. Each chapter provides easy-to-understand C++ examples, along with hardware and timing diagrams where appropriate. The book progresses from simple concepts such as sequential logic design to more complicated topics such as memory architecture and hierarchical sub-system design. Later chapters bring together many of the earlier HLS design concepts through their application in simplified design examples. These examples illustrate the fundamental principles behind C++ hardware design, which will translate to much larger designs. Although this book focuses primarily on C and C++ to present the basics of C++ synthesis, all of the concepts are equally applicable to SystemC when describing the core algorithmic part of a design. On completion of this book, readers should be well on their way to becoming experts in high-level synthesis.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Computational Studies of Human Motion written by David Forsyth and published by Now Publishers Inc. This book was released on 2006 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Studies of Human Motion: Part 1, Tracking and Motion Synthesis reviews methods for kinematic tracking of the human body in video. The review confines itself to the earlier stages of motion, focusing on tracking and motion synthesis. There is an extensive discussion of open issues. The authors identify some puzzling phenomena associated with the choice of human motion representation --- joint angles vs. joint positions. The review concludes with a quick guide to resources and an extensive bibliography of over 400 references. Computational Studies of Human Motion: Part 1, Tracking and Motion Synthesis is an invaluable reference for those engaged in computational geometry, computer graphics, image processing, imaging in general, and robotic.
Download or read book Molecular Biology of the Cell written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machines and Mechanisms written by David H. Myszka and published by . This book was released on 2005 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the techniques necessary to study the motion of machines, and emphasizes the application of kinematic theories to real-world machines consistent with the philosophy of engineering and technology programs. This book intents to bridge the gap between a theoretical study of kinematics and the application to practical mechanism.
Download or read book Notes on the Synthesis of Form written by Christopher Alexander and published by Harvard University Press. This book was released on 1964 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: "These notes are about the process of design: the process of inventing things which display new physical order, organization, form, in response to function." This book, opening with these words, presents an entirely new theory of the process of design. In the first part of the book, Christopher Alexander discusses the process by which a form is adapted to the context of human needs and demands that has called it into being. He shows that such an adaptive process will be successful only if it proceeds piecemeal instead of all at once. It is for this reason that forms from traditional un-self-conscious cultures, molded not by designers but by the slow pattern of changes within tradition, are so beautifully organized and adapted. When the designer, in our own self-conscious culture, is called on to create a form that is adapted to its context he is unsuccessful, because the preconceived categories out of which he builds his picture of the problem do not correspond to the inherent components of the problem, and therefore lead only to the arbitrariness, willfulness, and lack of understanding which plague the design of modern buildings and modern cities. In the second part, Mr. Alexander presents a method by which the designer may bring his full creative imagination into play, and yet avoid the traps of irrelevant preconception. He shows that, whenever a problem is stated, it is possible to ignore existing concepts and to create new concepts, out of the structure of the problem itself, which do correspond correctly to what he calls the subsystems of the adaptive process. By treating each of these subsystems as a separate subproblem, the designer can translate the new concepts into form. The form, because of the process, will be well-adapted to its context, non-arbitrary, and correct. The mathematics underlying this method, based mainly on set theory, is fully developed in a long appendix. Another appendix demonstrates the application of the method to the design of an Indian village.
Download or read book Advances in Artificial Systems for Medicine and Education IV written by Zhengbing Hu and published by Springer. This book was released on 2021-01-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances for the development of artificial intelligence systems and their applications in various fields from medicine and technology to education. The proceedings comprise refereed papers presented at the Fourth International Conference of Artificial Intelligence, Medical Engineering, Education (AIMEE2020), held at the Mechanical Engineering Institute of the Russian Academy of Sciences, Moscow, Russia, in 3–4 October 2020. Given the rapid development of artificial intelligence systems, the book emphasizes the need for the intensification of training of a growing number of relevant specialists, in particular, in medical engineering to increase the effectiveness of medical diagnosing and treatment. In digital artificial intelligence systems, scientists endeavor to reproduce the innate intellectual abilities of human and other organisms, and the in-depth study of genetic systems and inherited biological processes can provide new approaches to create more and more effective artificial intelligence methods. Topics of the included papers concern thematic materials in the following spheres: mathematics and biomathematics; medical approaches; technological and educational approaches. The book is a compilation of state-of-the-art papers in the field, covering a comprehensive range of subjects that is relevant to business managers and engineering professionals alike. The breadth and depth of these proceedings make them an excellent resource for asset management practitioners, researchers, and academics, as well as undergraduate and postgraduate students interested in artificial intelligence and bioinformatics systems as well as their growing applications. Intended readership includes specialists, students, and other circles of readers who would like to know where artificial intelligence systems can be applied in the future with great benefit.
