Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Constrained Optimization and Optimal Control for Partial Differential Equations written by Günter Leugering and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume focuses on optimization and control of processes governed by partial differential equations. The contributors are mostly participants of the DFG-priority program 1253: Optimization with PDE-constraints which is active since 2006. The book is organized in sections which cover almost the entire spectrum of modern research in this emerging field. Indeed, even though the field of optimal control and optimization for PDE-constrained problems has undergone a dramatic increase of interest during the last four decades, a full theory for nonlinear problems is still lacking. The contributions of this volume, some of which have the character of survey articles, therefore, aim at creating and developing further new ideas for optimization, control and corresponding numerical simulations of systems of possibly coupled nonlinear partial differential equations. The research conducted within this unique network of groups in more than fifteen German universities focuses on novel methods of optimization, control and identification for problems in infinite-dimensional spaces, shape and topology problems, model reduction and adaptivity, discretization concepts and important applications. Besides the theoretical interest, the most prominent question is about the effectiveness of model-based numerical optimization methods for PDEs versus a black-box approach that uses existing codes, often heuristic-based, for optimization.

Download or read book Optimization Methods and Applications written by Xiao-qi Yang and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book is dedicated to Professor N. U. Ahmed, a leading scholar and a renowned researcher in optimal control and optimization on the occasion of his retirement from the Department of Electrical Engineering at University of Ottawa in 1999. The contributions of this volume are in the areas of optimal control, non linear optimization and optimization applications. They are mainly the im proved and expanded versions of the papers selected from those presented in two special sessions of two international conferences. The first special session is Optimization Methods, which was organized by K. L. Teo and X. Q. Yang for the International Conference on Optimization and Variational Inequality, the City University of Hong Kong, Hong Kong, 1998. The other one is Optimal Control, which was organized byK. ~Teo and L. Caccetta for the Dynamic Control Congress, Ottawa, 1999. This volume is divided into three parts: Optimal Control; Optimization Methods; and Applications. The Optimal Control part is concerned with com putational methods, modeling and nonlinear systems. Three computational methods for solving optimal control problems are presented: (i) a regularization method for computing ill-conditioned optimal control problems, (ii) penalty function methods that appropriately handle final state equality constraints, and (iii) a multilevel optimization approach for the numerical solution of opti mal control problems. In the fourth paper, the worst-case optimal regulation involving linear time varying systems is formulated as a minimax optimal con trol problem.

Download or read book Control and Optimization with PDE Constraints written by Kristian Bredies and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many mathematical models of physical, biological and social systems involve partial differential equations (PDEs). The desire to understand and influence these systems naturally leads to considering problems of control and optimization. This book presents important topics in the areas of control of PDEs and of PDE-constrained optimization, covering the full spectrum from analysis to numerical realization and applications. Leading scientists address current topics such as non-smooth optimization, Hamilton–Jacobi–Bellmann equations, issues in optimization and control of stochastic partial differential equations, reduced-order models and domain decomposition, discretization error estimates for optimal control problems, and control of quantum-dynamical systems. These contributions originate from the “International Workshop on Control and Optimization of PDEs” in Mariatrost in October 2011. This book is an excellent resource for students and researchers in control or optimization of differential equations. Readers interested in theory or in numerical algorithms will find this book equally useful.

Download or read book Practical Methods for Optimal Control and Estimation Using Nonlinear Programming written by John T. Betts and published by SIAM. This book was released on 2010-01-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: A focused presentation of how sparse optimization methods can be used to solve optimal control and estimation problems.

Download or read book Geometric Partial Differential Equations Part 2 written by Andrea Bonito and published by Elsevier. This book was released on 2021-01-26 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides their intrinsic mathematical interest, geometric partial differential equations (PDEs) are ubiquitous in many scientific, engineering and industrial applications. They represent an intellectual challenge and have received a great deal of attention recently. The purpose of this volume is to provide a missing reference consisting of self-contained and comprehensive presentations. It includes basic ideas, analysis and applications of state-of-the-art fundamental algorithms for the approximation of geometric PDEs together with their impacts in a variety of fields within mathematics, science, and engineering. - About every aspect of computational geometric PDEs is discussed in this and a companion volume. Topics in this volume include stationary and time-dependent surface PDEs for geometric flows, large deformations of nonlinearly geometric plates and rods, level set and phase field methods and applications, free boundary problems, discrete Riemannian calculus and morphing, fully nonlinear PDEs including Monge-Ampere equations, and PDE constrained optimization - Each chapter is a complete essay at the research level but accessible to junior researchers and students. The intent is to provide a comprehensive description of algorithms and their analysis for a specific geometric PDE class, starting from basic concepts and concluding with interesting applications. Each chapter is thus useful as an introduction to a research area as well as a teaching resource, and provides numerous pointers to the literature for further reading - The authors of each chapter are world leaders in their field of expertise and skillful writers. This book is thus meant to provide an invaluable, readable and enjoyable account of computational geometric PDEs

Download or read book Constrained Optimal Control of Linear and Hybrid Systems written by Francesco Borrelli and published by Springer. This book was released on 2003-09-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many practical control problems are dominated by characteristics such as state, input and operational constraints, alternations between different operating regimes, and the interaction of continuous-time and discrete event systems. At present no methodology is available to design controllers in a systematic manner for such systems. This book introduces a new design theory for controllers for such constrained and switching dynamical systems and leads to algorithms that systematically solve control synthesis problems. The first part is a self-contained introduction to multiparametric programming, which is the main technique used to study and compute state feedback optimal control laws. The book's main objective is to derive properties of the state feedback solution, as well as to obtain algorithms to compute it efficiently. The focus is on constrained linear systems and constrained linear hybrid systems. The applicability of the theory is demonstrated through two experimental case studies: a mechanical laboratory process and a traction control system developed jointly with the Ford Motor Company in Michigan.

Download or read book Constrained Markov Decision Processes written by Eitan Altman and published by Routledge. This book was released on 2021-12-17 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified approach for the study of constrained Markov decision processes with a finite state space and unbounded costs. Unlike the single controller case considered in many other books, the author considers a single controller with several objectives, such as minimizing delays and loss, probabilities, and maximization of throughputs. It is desirable to design a controller that minimizes one cost objective, subject to inequality constraints on other cost objectives. This framework describes dynamic decision problems arising frequently in many engineering fields. A thorough overview of these applications is presented in the introduction. The book is then divided into three sections that build upon each other.

Download or read book Recent Developments in Discontinuous Galerkin Finite Element Methods for Partial Differential Equations written by Xiaobing Feng and published by Springer Science & Business Media. This book was released on 2013-11-08 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of discontinuous Galerkin finite element methods has attracted considerable recent attention from scholars in the applied sciences and engineering. This volume brings together scholars working in this area, each representing a particular theme or direction of current research. Derived from the 2012 Barrett Lectures at the University of Tennessee, the papers reflect the state of the field today and point toward possibilities for future inquiry. The longer survey lectures, delivered by Franco Brezzi and Chi-Wang Shu, respectively, focus on theoretical aspects of discontinuous Galerkin methods for elliptic and evolution problems. Other papers apply DG methods to cases involving radiative transport equations, error estimates, and time-discrete higher order ALE functions, among other areas. Combining focused case studies with longer sections of expository discussion, this book will be an indispensable reference for researchers and students working with discontinuous Galerkin finite element methods and its applications.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book European Control Conference 1995 written by and published by European Control Association. This book was released on 1995-09-05 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1995, Rome, Italy 5-8 September 1995

Download or read book Frontiers in PDE Constrained Optimization written by Harbir Antil and published by Springer. This book was released on 2018-10-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a broad and uniform introduction of PDE-constrained optimization as well as to document a number of interesting and challenging applications. Many science and engineering applications necessitate the solution of optimization problems constrained by physical laws that are described by systems of partial differential equations (PDEs)​. As a result, PDE-constrained optimization problems arise in a variety of disciplines including geophysics, earth and climate science, material science, chemical and mechanical engineering, medical imaging and physics. This volume is divided into two parts. The first part provides a comprehensive treatment of PDE-constrained optimization including discussions of problems constrained by PDEs with uncertain inputs and problems constrained by variational inequalities. Special emphasis is placed on algorithm development and numerical computation. In addition, a comprehensive treatment of inverse problems arising in the oil and gas industry is provided. The second part of this volume focuses on the application of PDE-constrained optimization, including problems in optimal control, optimal design, and inverse problems, among other topics.

Download or read book 8th International Munich Chassis Symposium 2017 written by Prof. Dr. Peter E. Pfeffer and published by Springer. This book was released on 2017-09-20 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: You can find in this book the development of highly and fully automatic driving and the increasing electrification of the powertrain now face chassis development with new challenges too. Innovative chassis systems have to provide solutions for automated driving. The efficient chassis of the future also has to keep an eye on CO2 targets, comfort and customer focus at all times. A modern chassis has to provide for this in the form of innovations while taking the physical and mechanical interdependencies into account. Confronting these new developments is a challenge for simulation and testing.

Download or read book Recent Advances in Optimization and its Applications in Engineering written by Moritz Diehl and published by Springer Science & Business Media. This book was released on 2010-09-21 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical optimization encompasses both a rich and rapidly evolving body of fundamental theory, and a variety of exciting applications in science and engineering. The present book contains a careful selection of articles on recent advances in optimization theory, numerical methods, and their applications in engineering. It features in particular new methods and applications in the fields of optimal control, PDE-constrained optimization, nonlinear optimization, and convex optimization. The authors of this volume took part in the 14th Belgian-French-German Conference on Optimization (BFG09) organized in Leuven, Belgium, on September 14-18, 2009. The volume contains a selection of reviewed articles contributed by the conference speakers as well as three survey articles by plenary speakers and two papers authored by the winners of the best talk and best poster prizes awarded at BFG09. Researchers and graduate students in applied mathematics, computer science, and many branches of engineering will find in this book an interesting and useful collection of recent ideas on the methods and applications of optimization.

Download or read book Optimization Optimal Control and Partial Differential Equations written by Viorel Barbu and published by Springer Science & Business Media. This book was released on 1992 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variational methods in mechanics and physical models.- Fluid flows in dielectric porous media.- The impact of a jet with two fluids on a porous wall.- Critical point methods in nonlinear eigenvalue problems with discontinuities.- Maximum principles for elliptic systems.- Exponential dichotomy of evolution operators in Banach spaces.- Asymptotic properties of solutions to evolution equations.- On some nonlinear elastic waves biperiodical or almost periodical in mechanics and extensions hyperbolic nonlinear partial differential equations.- The controllability of infinite dimensional and distributed parameter systems.- Singularities in boundary value problems and exact controllability of hyperbolic systems.- Exact controllability of a shallow shell model.- Inverse problem: Identification of a melting front in the 2D case.- Micro-local approach to the control for the plates equation.- Bounded solutions for controlled hyperbolic systems.- Controllability and turbulence.- The H? control problem.- The H? boundary control with state feedback; the hyperbolic case.- Remarks on the theory of robust control.- The dynamic programming method.- Optimality and characteristics of Hamilton-Jacobi-Bellman equations.- Verification theorems of dynamic programming type in optimal control.- Isaacs' equations for value-functions of differential games.- Optimal control for robot manipulators.- Control theory and environmental problems: Slow fast models for management of renewable ressources.- On the Riccati equations of stochastic control.- Optimal control of nonlinear partial differential equations.- A boundary Pontryagin's principle for the optimal control of state-constrained elliptic systems.- Controllability properties for elliptic systems, the fictitious domain method and optimal shape design problems.- Optimal control for elliptic equation and applications.- Inverse problems for variational inequalities.- The variation of the drag with respect to the domain in Navier-Stokes flow, .- Mathematical programming and nonsmooth optimization.- Scalar minimax properties in vectorial optimization.- Least-norm regularization for weak two-level optimization problems.- Continuity of the value function with respect to the set of constraints.- On integral inequalities involving logconcave functions.- Numerical solution of free boundary problems in solids mechanics.- Authors' index

Download or read book Optimization written by Elijah Polak and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with optimality conditions, algorithms, and discretization tech niques for nonlinear programming, semi-infinite optimization, and optimal con trol problems. The unifying thread in the presentation consists of an abstract theory, within which optimality conditions are expressed in the form of zeros of optimality junctions, algorithms are characterized by point-to-set iteration maps, and all the numerical approximations required in the solution of semi-infinite optimization and optimal control problems are treated within the context of con sistent approximations and algorithm implementation techniques. Traditionally, necessary optimality conditions for optimization problems are presented in Lagrange, F. John, or Karush-Kuhn-Tucker multiplier forms, with gradients used for smooth problems and subgradients for nonsmooth prob lems. We present these classical optimality conditions and show that they are satisfied at a point if and only if this point is a zero of an upper semicontinuous optimality junction. The use of optimality functions has several advantages. First, optimality functions can be used in an abstract study of optimization algo rithms. Second, many optimization algorithms can be shown to use search directions that are obtained in evaluating optimality functions, thus establishing a clear relationship between optimality conditions and algorithms. Third, estab lishing optimality conditions for highly complex problems, such as optimal con trol problems with control and trajectory constraints, is much easier in terms of optimality functions than in the classical manner. In addition, the relationship between optimality conditions for finite-dimensional problems and semi-infinite optimization and optimal control problems becomes transparent.

Download or read book Optimal Control Theory with Applications in Economics written by Thomas A. Weber and published by MIT Press. This book was released on 2011-09-30 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rigorous introduction to optimal control theory, with an emphasis on applications in economics. This book bridges optimal control theory and economics, discussing ordinary differential equations, optimal control, game theory, and mechanism design in one volume. Technically rigorous and largely self-contained, it provides an introduction to the use of optimal control theory for deterministic continuous-time systems in economics. The theory of ordinary differential equations (ODEs) is the backbone of the theory developed in the book, and chapter 2 offers a detailed review of basic concepts in the theory of ODEs, including the solution of systems of linear ODEs, state-space analysis, potential functions, and stability analysis. Following this, the book covers the main results of optimal control theory, in particular necessary and sufficient optimality conditions; game theory, with an emphasis on differential games; and the application of control-theoretic concepts to the design of economic mechanisms. Appendixes provide a mathematical review and full solutions to all end-of-chapter problems. The material is presented at three levels: single-person decision making; games, in which a group of decision makers interact strategically; and mechanism design, which is concerned with a designer's creation of an environment in which players interact to maximize the designer's objective. The book focuses on applications; the problems are an integral part of the text. It is intended for use as a textbook or reference for graduate students, teachers, and researchers interested in applications of control theory beyond its classical use in economic growth. The book will also appeal to readers interested in a modeling approach to certain practical problems involving dynamic continuous-time models.