Download or read book Twelfth International Conference on VLSI Design written by VLSI Society of India and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1999 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the January 1999 conference consist of 103 papers, 11 talks, and six tutorials. The papers are grouped under the headings of TCAD to ECAD, low power, testing, co-design and synthesis, analog design, multi-valued logic, verification, digital signal processor (DSP), logic synthesis,

Download or read book VLSI SOC From Systems to Chips written by Manfred Glesner and published by Springer. This book was released on 2006-08-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers that have been presented during the twelfth edition of the IFIP TC10/WG10.5 International Conference on Very Large Scale Integration, a Global System-on-a-Chip Design & CAD Conference. The 12* edition was held at the Lufthansa Training Center in Seeheim-Jugenheim, south of Darmstadt, Germany (December 1-3, 2003). Previous conferences have taken place in Edinburgh (81), Trondheim (83), Tokyo (85), Vancouver (87), Munich (89), Edinburgh (91), Grenoble (93), Tokyo (95), Gramado (97), Lisbon (99)andMontpellier(01). The purpose of this conference, sponsored by IFIP TC 10 Working Group 10.5, is to provide a forum to exchange ideas and show research results in the field of microelectronics design. The current trend toward increasing chip integration brings about exhilarating new challenges both at the physical and system-design levels: this conference aims to address these exciting new issues. The 2003 edition of VLSI-SoC conserved the traditional structure, which has been successful in previous editions. The quality of submissions (142 papers) made the selection process difficult, but finally 57 papers and 14 posters were accepted for presentation in VLSI-SoC 2003. Submissions came from Austria, Bulgaria, Brazil, Canada, Egypt, England, Estonia, Finland, France, Germany, Greece, Hungary, India, Iran, Israel, Italy, Japan, Korea, Malaysia, Mexico, Netherlands, Poland, Portugal, Romania, Spain, Sweden, Taiwan and the United States of America. From 57 papers presented at the conference, 18 were selected to have an extended and revised version included in this book.

Download or read book Proceedings of the Twelfth International Cryogenic Engineering Conference Southampton UK 12 15 July 1988 written by R. G. Scurlock and published by Butterworth-Heinemann. This book was released on 2017-12-28 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Twelfth International Cryogenic Engineering Conference Southampton, UK, 12–15 July 1988

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by José L. Ayala and published by Springer. This book was released on 2013-01-03 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 22nd International Conference on Integrated Circuit and System Design, PATMOS 2012, held in Newcastle, UK Spain, in September 2012. The 25 revised full papers presented were carefully reviewed and selected from numerous submissions. The paper feature emerging challenges in methodologies and tools for the design of upcoming generations of integrated circuits and systems, including reconfigurable hardware such as FPGAs. The technical program focus on timing, performance and power consumption as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization.

Download or read book Algorithms and Architectures for Parallel Processing written by Zahir Tari and published by Springer Nature. This book was released on with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On Chip Communication Architectures written by Sudeep Pasricha and published by Morgan Kaufmann. This book was released on 2010-07-28 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, system-on-chip (SoC) designs have evolved to address the ever increasing complexity of applications, fueled by the era of digital convergence. Improvements in process technology have effectively shrunk board-level components so they can be integrated on a single chip. New on-chip communication architectures have been designed to support all inter-component communication in a SoC design. These communication architecture fabrics have a critical impact on the power consumption, performance, cost and design cycle time of modern SoC designs. As application complexity strains the communication backbone of SoC designs, academic and industrial R&D efforts and dollars are increasingly focused on communication architecture design. On-Chip Communication Architecures is a comprehensive reference on concepts, research and trends in on-chip communication architecture design. It will provide readers with a comprehensive survey, not available elsewhere, of all current standards for on-chip communication architectures. - A definitive guide to on-chip communication architectures, explaining key concepts, surveying research efforts and predicting future trends - Detailed analysis of all popular standards for on-chip communication architectures - Comprehensive survey of all research on communication architectures, covering a wide range of topics relevant to this area, spanning the past several years, and up to date with the most current research efforts - Future trends that with have a significant impact on research and design of communication architectures over the next several years

Download or read book Thermal Testing of Integrated Circuits written by J. Altet and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature has been always considered as an appreciable magnitude to detect failures in electric systems. In this book, the authors present the feasibility of considering temperature as an observable for testing purposes, with full coverage of the state of the art.

Download or read book 16th International Conference on Information Technology New Generations ITNG 2019 written by Shahram Latifi and published by Springer. This book was released on 2019-05-22 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 16th International Conference on Information Technology - New Generations (ITNG), continues an annual event focusing on state of the art technologies pertaining to digital information and communications. The applications of advanced information technology to such domains as astronomy, biology, education, geosciences, security and health care are among topics of relevance to ITNG. Visionary ideas, theoretical and experimental results, as well as prototypes, designs, and tools that help the information readily flow to the user are of special interest. Machine Learning, Robotics, High Performance Computing, and Innovative Methods of Computing are examples of related topics. The conference features keynote speakers, the best student award, poster award, service award, a technical open panel, and workshops/exhibits from industry, government and academia.

Download or read book Multicore Systems On Chip Practical Software Hardware Design written by Abderazek Ben Abdallah and published by Springer Science & Business Media. This book was released on 2013-07-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: System on chips designs have evolved from fairly simple unicore, single memory designs to complex heterogeneous multicore SoC architectures consisting of a large number of IP blocks on the same silicon. To meet high computational demands posed by latest consumer electronic devices, most current systems are based on such paradigm, which represents a real revolution in many aspects in computing. The attraction of multicore processing for power reduction is compelling. By splitting a set of tasks among multiple processor cores, the operating frequency necessary for each core can be reduced, allowing to reduce the voltage on each core. Because dynamic power is proportional to the frequency and to the square of the voltage, we get a big gain, even though we may have more cores running. As more and more cores are integrated into these designs to share the ever increasing processing load, the main challenges lie in efficient memory hierarchy, scalable system interconnect, new programming paradigms, and efficient integration methodology for connecting such heterogeneous cores into a single system capable of leveraging their individual flexibility. Current design methods tend toward mixed HW/SW co-designs targeting multicore systems on-chip for specific applications. To decide on the lowest cost mix of cores, designers must iteratively map the device’s functionality to a particular HW/SW partition and target architectures. In addition, to connect the heterogeneous cores, the architecture requires high performance complex communication architectures and efficient communication protocols, such as hierarchical bus, point-to-point connection, or Network-on-Chip. Software development also becomes far more complex due to the difficulties in breaking a single processing task into multiple parts that can be processed separately and then reassembled later. This reflects the fact that certain processor jobs cannot be easily parallelized to run concurrently on multiple processing cores and that load balancing between processing cores – especially heterogeneous cores – is very difficult.

Download or read book Formal Methods in Computer Aided Design written by Mark D. Aagaard and published by Springer. This book was released on 2003-06-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Fourth Biennial Conference on F- mal Methods in Computer-Aided Design (FMCAD). The conference is devoted to the use of mathematical methods for the analysis of digital hardware c- cuits and systems. The workreported in this bookdescribes the use of formal mathematics and associated tools to design and verify digital hardware systems. Functional veri?cation has become one of the principal costs in a modern computer design e?ort. FMCAD provides a venue for academic and industrial researchers and practitioners to share their ideas and experiences of using - screte mathematical modeling and veri?cation. Over the past 20 years, this area has grown from just a few academic researchers to a vibrant worldwide com- nity of people from both academia and industry. This volume includes 23 papers selected from the 47 submitted papers, each of which was reviewed by at least three program committee members. The history of FMCAD dates backto 1984, when the earliest meetings on this topic occurred as part of IFIP WG10.2.

Download or read book Computer Information Systems and Industrial Management written by Khalid Saeed and published by Springer. This book was released on 2016-09-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 15th IFIP TC8 International Conference on Computer Information Systems and Industrial Management, CISIM 2016, held in Vilnius, Lithuania, in September 2016. The 63 regular papers presented together with 1 inivted paper and 5 keynotes in this volume were carefully reviewed and selected from about 89 submissions. The main topics covered are rough set methods for big data analytics; images, visualization, classification; optimization, tuning; scheduling in manufacturing and other applications; algorithms; decisions; intelligent distributed systems; and biometrics, identification, security.

Download or read book Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020 written by Khalid Isa and published by Springer Nature. This book was released on 2021-09-24 with total page 1155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 12th National Technical Symposium on Unmanned System Technology 2020 (NUSYS’20) held on October 27–28, 2020. It covers a number of topics, including intelligent robotics, novel sensor technology, control algorithms, acoustics signal processing, imaging techniques, biomimetic robots, green energy sources, and underwater communication backbones and protocols, and it appeals to researchers developing marine technology solutions and policy-makers interested in technologies to facilitate the exploration of coastal and oceanic regions.

Download or read book Energy Efficient Computing Electronics written by Santosh K. Kurinec and published by CRC Press. This book was released on 2019-01-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: In our abundant computing infrastructure, performance improvements across most all application spaces are now severely limited by the energy dissipation involved in processing, storing, and moving data. The exponential increase in the volume of data to be handled by our computational infrastructure is driven in large part by unstructured data from countless sources. This book explores revolutionary device concepts, associated circuits, and architectures that will greatly extend the practical engineering limits of energy-efficient computation from device to circuit to system level. With chapters written by international experts in their corresponding field, the text investigates new approaches to lower energy requirements in computing. Features • Has a comprehensive coverage of various technologies • Written by international experts in their corresponding field • Covers revolutionary concepts at the device, circuit, and system levels

Download or read book 12th International Symposium on Software Reliability Engineering written by and published by I E E E. This book was released on 2001 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume constitute the proceedings of the 12th International Symposium on Software Reliability Engineering (ISSRE 2001).

Download or read book Advances in Chemical Engineering written by Zeeshan Nawaz and published by BoD – Books on Demand. This book was released on 2012-03-23 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical engineering applications have been a source of challenging optimization problems in terms of economics and technology. The goal of this book is to enable the reader to get instant information on fundamentals and advancements in chemical engineering. This book addresses ongoing evolutions of chemical engineering and provides overview to the sate of the art advancements. Molecular perspective is increasingly important in the refinement of kinetic and thermodynamic molding. As a result, much of the material was revised on industrial problems and their sophisticated solutions from known scientists around the world. These issues were divided in to two sections, fundamental advances and catalysis and reaction engineering. A distinct feature of this text continues to be the emphasis on molecular chemistry, reaction engineering and modeling to achieve rational and robust industrial design. Our perspective is that this background must be made available to undergraduate, graduate and professionals in an integrated manner.

Download or read book Nanotechnology written by Cherry Bhargava and published by CRC Press. This book was released on 2020-10-19 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology: Advances and Real-Life Applications offers a comprehensive reference text about advanced concepts and applications in the field of nanotechnology. The text – written by researchers practicing in the field – presents a detailed discussion of key concepts including nanomaterials and their synthesis, fabrication and characterization of nanomaterials, carbon-based nanomaterials, nano-bio interface, and nanoelectronics. The applications of nanotechnology in the fields of renewable energy, medicine and agriculture are each covered in a dedicated chapter. The text will be invaluable for senior undergraduate and graduate students in the fields of electrical engineering, electronics engineering, nanotechnology and nanoscience. Dr. Cherry Bhargava is an Associate Professor and Head, VLSI domain, at the School of Electrical and Electronics Engineering of Lovely Professional University, Jalandhar, India. Dr. Amit Sachdeva is an Associate Professor at Lovely Professional University, Jalandhar, India.

Download or read book Proceedings of the Twelfth Annual ACM SIAM Symposium on Discrete Algorithms written by SIAM Activity Group on Discrete Mathematics and published by SIAM. This book was released on 2001-01-01 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 130 papers, which were selected based on originality, technical contribution, and relevance. Although the papers were not formally refereed, every attempt was made to verify the main claims. It is expected that most will appear in more complete form in scientific journals. The proceedings also includes the paper presented by invited plenary speaker Ronald Graham, as well as a portion of the papers presented by invited plenary speakers Udi Manber and Christos Papadimitriou.