Download or read book Turbulent Flow in a 180 Degree Bend Modeling and Computations written by Upender K. Kaul and published by . This book was released on 1989 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Flow in Passage Around a 180 Deg Bend An Experimental and Numerical Study written by Joseph A. C. Humphrey and published by . This book was released on 1983 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser doppler velocimeter measurements for turbulent flow in a 180 degree bend of square cross-section are presented and discussed. These reveal previously undocumented anisotropic features in the flow. Limited data are also provided for the flow in the downstream tangent. Numerical predictions of the flow configurations were made with two types of turbulence models. The two-equation model yields results in broad agreement with the data but fails to reproduce detailed variations present in the flow. It is shown that while the algebraic stress model can resolive these variations, good spatial resolution of the mean flow field is required.
Download or read book Turbulent Flow in a 180 Deg Bend Modeling and Computations written by and published by . This book was released on 1989 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotating Turbulent Flow Through a 180 pipe Bend written by Mohammed Anwer and published by . This book was released on 1989 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing Turbulent Flow in a 180 Degree Bend and Downstream Tangent of Square Cross Sections written by J. A. C. Humphrey and published by . This book was released on 1982 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed account is given of the experimental and numerical modeling activities for the research period, relating to turbulent flow in a 180 deg curved duct. The measurements show variations in the flow field which, while understood, are not predictable by a K-epsilon model of turbulence. Numerical diffusion and exaggerated physical diffusion in the turbulence model are believed to be the major causes for the discrepancies observed. The new experimental data offered here should be of value for extending the theoretical base for the improved understanding and modeling of 3-D turbulent flows. Recommendations are made for continuing work.
Download or read book Turbulent Flow in a 180 Deg Bend written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-15 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: A low Reynolds number k-epsilon turbulence model was presented which yields accurate predictions of the kinetic energy near the wall. The model is validated with the experimental channel flow data of Kreplin and Eckelmann. The predictions are also compared with earlier results from direct simulation of turbulent channel flow. The model is especially useful for internal flows where the inflow boundary condition of epsilon is not easily prescribed. The model partly derives from some observations based on earlier direct simulation results of near-wall turbulence. The low Reynolds number turbulence model together with an existing curvature correction appropriate to spinning cylinder flows was used to simulate the flow in a U-bend with the same radius of curvature as the Space Shuttle Main Engine (SSME) Turn-Around Duct (TAD). The present computations indicate a space varying curvature correction parameter as opposed to a constant parameter as used in the spinning cylinder flows. Comparison with limited available experimental data is made. The comparison is favorable, but detailed experimental data is needed to further improve the curvature model. Kaul, Upender K. Unspecified Center NAS2-11555...
Download or read book Turbulent Flow and Heat Transfer in Passage Around 180 Degree Bend An Experimental and Numerical Study written by Joseph A. C. Humphrey and published by . This book was released on 1981 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review is presented of the first year of research performed in an investigation aimed at developing a calculation scheme for predicting general three-dimensional flows in curved passages of circular and square cross-section. The experimental component deals with the implementation and validation of a laser-Doppler velocimeter and associated instrumentation. The numerical component deals with the development of a technique for reducing numerical diffusion in the calculation scheme. An update is provided of the current status of the research. A tentative schedule of work for years two and three is also given. (Author).
Download or read book Prediction of Turbulent Flow and Heat Transfer in a 180deg Bend of Square Cross section written by H. Iacovides and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Flows written by Jean Piquet and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: obtained are still severely limited to low Reynolds numbers (about only one decade better than direct numerical simulations), and the interpretation of such calculations for complex, curved geometries is still unclear. It is evident that a lot of work (and a very significant increase in available computing power) is required before such methods can be adopted in daily's engineering practice. I hope to l"Cport on all these topics in a near future. The book is divided into six chapters, each· chapter in subchapters, sections and subsections. The first part is introduced by Chapter 1 which summarizes the equations of fluid mechanies, it is developed in C~apters 2 to 4 devoted to the construction of turbulence models. What has been called "engineering methods" is considered in Chapter 2 where the Reynolds averaged equations al"C established and the closure problem studied (§1-3). A first detailed study of homogeneous turbulent flows follows (§4). It includes a review of available experimental data and their modeling. The eddy viscosity concept is analyzed in §5 with the l"Csulting ~alar-transport equation models such as the famous K-e model. Reynolds stl"Css models (Chapter 4) require a preliminary consideration of two-point turbulence concepts which are developed in Chapter 3 devoted to homogeneous turbulence. We review the two-point moments of velocity fields and their spectral transforms (§ 1), their general dynamics (§2) with the particular case of homogeneous, isotropie turbulence (§3) whel"C the so-called Kolmogorov's assumptions are discussed at length.
Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.
Download or read book Turbulent Flow in a 180 bend written by Upender Krishnen Kaul and published by . This book was released on 1989 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Convecting Flow in a Square Duct with a 180 Degree Bend an Experimental and Numerical Study written by Richard W. Johnson and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Convecting Flow in a Square Duct with a 180deg Bend written by R. W. Johnson and published by . This book was released on 1984 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research in this British dissertation was motivated by the desire to provide a comprehensive set of convective heat transfer data against which flow simulation schemes could be tested. Turbulent convecting three-dimensional flow of fluids in curved passages is frequently encountered in thermofluids equipment and systems. Although such flow situations have been too complex to adequately simulate computationally in the past, recent developments have provided physical models coupled with numerical techniques which can be applied to provide such simulations. Nevertheless, it has not been established to what extent such simulations provide accurate predictions and a sufficiently detailed data base does not exist to allow a searching evaluation of computer predictions. It is the conclusion of this collaborative study that significant inadequacies remain in the turbulence and wall models with respect to their ability to predict fully-three dimensional curved turbulent flow. Predictions for the Nusselt number distribution are in rather better agreement with the experimental data than are the hydrodynamic and temperature field predictions.
Download or read book Developing Turbulent Flow in a 180 curved Pipe and Its Downstream Tangent written by James Henry Azzola and published by . This book was released on 1984 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prediction of Turbulent Flows written by Geoff Hewitt and published by Cambridge University Press. This book was released on 2005-06-08 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prediction of turbulent flows is of paramount importance in the development of complex engineering systems involving flow, heat and mass transfer, and chemical reactions. Arising from a programme held at the Isaac Newton Institute in Cambridge, this volume reviews the current situation regarding the prediction of such flows through the use of modern computational fluid dynamics techniques, and attempts to address the inherent problem of modelling turbulence. In particular, the current physical understanding of such flows is summarised and the resulting implications for simulation discussed. The volume continues by surveying current approximation methods whilst discussing their applicability to industrial problems. This major work concludes by providing a specific set of guidelines for selecting the most appropriate model for a given problem. Unique in its breadth and critical approach, this book will be of immense value to experienced practitioners and researchers, continuing the UK's strong tradition in fluid dynamics.
Download or read book Computation of Flow and Heat Transfer in Flow Around a 180 Deg Bend written by B. E. Launder and published by . This book was released on 1984 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research year saw the completion of the research on turbulent convective heat transfer in 180 deg bends. The main research effort during the year was directed at bends of circular cross section. Two sections deal with experimental and computational aspects of this work. These are preceded by a brief account of further computational work in the squared-sectional duct.
Download or read book Transport Phenomena in Rotating Machinery written by J. H. Kim and published by CRC Press. This book was released on 1990 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completing the authoritative coverage begun in Dynamics of Rotating Machinery, this text offers 36 current chapters focusing on the areas of fluid flow, heat transfer, multiple flow, cavitation and design.
