Download or read book Swimming and Flying in Nature written by Theodore Wu and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on Swimming and Flying in Nature which was held at the California Institute of Technology, Pasadena, California from July 8-12, 1974 was conceived with the objective of providing an interdisciplinary forum for the discussion of funda mental biological and fluid mechanical aspects of these forms of natura110comotion. It was the earnest hope of all concerned in the organization of the Symposium that the exchange of knowledge and interaction of ideas from the disciplines involved would stimu late new research in this developing field. If the liveliness of the discussion generated among the 250 or so participants is any measure, then this objective was fulfilled to a significant degree. These two companion volumes contain the manuscripts of the papers presented during the Symposium. It is hoped that this permanent record will serve to perpetuate the enthusiasm and active thought generated during those days in Pasadena. The first volume contains the proceedings of the first two days of the confer ence (Sessions I to IV) which concentrated on the locomotion of micro-organisms. The second volume (Sessions V to VIII) deals with the propulsion of larger fish, insects and birds. Professor Sir James Lighthill's Special Invited Lecture which opened the Symposium is contained in the second volume, rather than the first, since it deals with natural flight.
Download or read book Drag Reduction written by American Institute of Chemical Engineers and published by . This book was released on 1971 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Flow for Chemical Engineers written by F. A. Holland and published by Hodder Education. This book was released on 1973 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduates.
Download or read book Turbulent Drag Reduction by Surfactant Additives written by Feng-Chen Li and published by John Wiley & Sons. This book was released on 2012-01-10 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent drag reduction by additives has long been a hot research topic. This phenomenon is inherently associated with multifold expertise. Solutions of drag-reducing additives are usually viscoelastic fluids having complicated rheological properties. Exploring the characteristics of drag-reduced turbulent flows calls for uniquely designed experimental and numerical simulation techniques and elaborate theoretical considerations. Pertinently understanding the turbulent drag reduction mechanism necessities mastering the fundamentals of turbulence and establishing a proper relationship between turbulence and the rheological properties induced by additives. Promoting the applications of the drag reduction phenomenon requires the knowledge from different fields such as chemical engineering, mechanical engineering, municipal engineering, and so on. This book gives a thorough elucidation of the turbulence characteristics and rheological behaviors, theories, special techniques and application issues for drag-reducing flows by surfactant additives based on the state-of-the-art of scientific research results through the latest experimental studies, numerical simulations and theoretical analyses. Covers turbulent drag reduction, heat transfer reduction, complex rheology and the real-world applications of drag reduction Introduces advanced testing techniques, such as PIV, LDA, and their applications in current experiments, illustrated with multiple diagrams and equations Real-world examples of the topic’s increasingly important industrial applications enable readers to implement cost- and energy-saving measures Explains the tools before presenting the research results, to give readers coverage of the subject from both theoretical and experimental viewpoints Consolidates interdisciplinary information on turbulent drag reduction by additives Turbulent Drag Reduction by Surfactant Additives is geared for researchers, graduate students, and engineers in the fields of Fluid Mechanics, Mechanical Engineering, Turbulence, Chemical Engineering, Municipal Engineering. Researchers and practitioners involved in the fields of Flow Control, Chemistry, Computational Fluid Dynamics, Experimental Fluid Dynamics, and Rheology will also find this book to be a much-needed reference on the topic.
Download or read book Flow Control Techniques and Applications written by Jinjun Wang and published by Cambridge University Press. This book was released on 2019 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the theory, applications and control mechanisms of flow control techniques.
Download or read book Friction Reduction by Algal and Bacterial Polymers written by Paul R. Kenis and published by . This book was released on 1971 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long-chain polymers from many seaweeds, microscopic algae, and bacteria have been demonstrated to reduce turbulent-flow friction in water. In the investigation all water samples tested from inland and marine sources gained friction-reduction ability when enriched with sugar, as a consequence of polysaccharide synthesis by bacteria. Biological polymers, therefore, are the probable cause of the unexplainable variations in hydrodynamic test facilities. Bacterial polysaccharides were more effective than seaweed extracts at low concentrations for friction reduction, but both were much less effective than synthetic polymers. Turbulent-flow frictional measurements were found to be sensitive for the detection, measurement, and partial characterization of long-chain polymers. (Author).
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index
Download or read book Structure of Turbulence and Drag Reduction written by Albert Gyr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1976 a similar titled IUTAM Symposium (Structure of Turbulence and Drag Reduction) was held in Washington . However, the progress made during the last thirteen years as weil as the much promising current research desired a second one this year. In Washington drag reduction by additives and by direct manipulation of the walls (compliant walls and heated surfaces) were discussed. In the meantime it became evident that drag reduction also occurs when turbulence is influenced by geometrical means, e.g. by influencing the pressure distribution by the shape of the body (airfoils) or by the introduction of streamwise perturbances on a body (riblets). In the recent years turbulence research has seen increasing attention being focused on the investigation of coherent structures, mainly in Newtonian fluids. We all know that these structures are a significant feature of turbulent flows, playing an important role in the energy balance in such flows. However their place in turbulence theories as weil as the factors influencing their development are still poorly understood. Consequently, the investigation of phenomena in which the properties of coherent structures are alte red provides a promising means of improving our understanding of turbulent flows in general.
Download or read book New Trends in Fluid Mechanics Research written by F. G. Zhuang and published by Springer Science & Business Media. This book was released on 2009-04-24 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the Fifth International Conference on Fluid Mechanics (ICFM-V), the primary forum for the presentation of technological advances and research results in the fields of theoretical, experimental, and computational Fluid Mechanics. Topics include: flow instability and turbulence, aerodynamics and gas dynamics, industrial and environmental fluid mechanics, biofluid mechanics, geophysical fluid mechanics, plasma and magneto-hydrodynamics, and others.
Download or read book Drag Reduction in Polymer Solutions written by American Institute of Chemical Engineers and published by . This book was released on 1973 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Fluid Mechanics written by Ron Darby and published by CRC Press. This book was released on 2016-11-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the most current, accurate, and practical fluid mechanics related applications that the practicing BS level engineer needs today in the chemical and related industries, in addition to a fundamental understanding of these applications based upon sound fundamental basic scientific principles. The emphasis remains on problem solving, and the new edition includes many more examples.
Download or read book Rheology of Drag Reducing Fluids written by Aroon Shenoy and published by Springer Nature. This book was released on 2020-03-25 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains theoretical derivations and presents expressions for fluid and convective turbulent flow of mildly elastic fluids in various internal and external flow situations involving different types of geometries, such as the smooth/rough circular pipes, annular ducts, curved tubes, vertical flat plates, and channels. Understanding the methodology of the analyses facilitates appreciation for the rationale used for deriving expressions of parameters relevant to the turbulent flow of mildly elastic fluids. This knowledge serves as a driving force for developing new ideas, investigating new situations, and extending theoretical analyses to other unexplored areas of the rheology of mildly elastic drag reducing fluids.The book suits a range of functions--it can be used to teach elective upper-level undergraduate or graduate courses for chemical engineers, material scientists, mechanical engineers, and polymer scientists; guide researchers unexposed to this alluring and interesting area of drag reduction; and serve as a reference to all who want to explore and expand the areas dealt with in this book.
Download or read book Experimental Hydrodynamics for Flow Around Bodies written by Viktor V. Babenko and published by Academic Press. This book was released on 2021-01-29 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Hydrodynamics for Flow around Bodies explains complex novel experimental methodologies to solve a wide range of important flow problems in industry and research. The book starts by examining the fundamental physical laws necessary for the optimization of techniques for hydro-aeromechanics, heat engineering, and other disciplines related to flow. The reader is then provided with detailed explanations of novel experimental methods, along with the results of physical research. These results are also necessary for the construction of theoretical models that provide improved descriptions for numerous problems in various scientific fields. Frequent discussions, examples of practical applications throughout the text, and foundational, theoretical materials help a range of readers engage and apply these methods to problems in fields including drag reduction, noiseless movement, optimal maneuvering, intense heat transfer, control of separated vortices, wind power, economical energy consumption, and more. - Provides instructions on the set up of innovative experiments for drag reduction that will be of great interest to researchers in aerospace, marine and automotive engineering - Describes, in detail, a variety of novel experiments to investigate boundary layer flow, together with experimental data that can be used with computational models - Assists with bio-inspired hydrodynamic design by providing models of a waving fin mover and investigations of analogs of hydrobiont skin covers
Download or read book Polymer Physics written by Leszek A. Utracki and published by John Wiley & Sons. This book was released on 2011-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive review of the state-of-the-art advanced research in the field, Polymer Physics explores the interrelationships among polymer structure, morphology, and physical and mechanical behavior. Featuring contributions from renowned experts, the book covers the basics of important areas in polymer physics while projecting into the future, making it a valuable resource for students and chemists, chemical engineers, materials scientists, and polymer scientists as well as professionals in related industries.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book NBS Special Publication written by and published by . This book was released on 1973 with total page 1436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Research in the United States and Canada written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
