Download or read book Flow Past Highly Compliant Boundaries and in Collapsible Tubes written by Peter W. Carpenter and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Flow in Collapsible Tubes and Past Other Highly Compliant Boundaries was held on 26-30 March, 2001, at the University of Warwick. As this was the first scientific meeting of its kind we considered it important to mark the occasion by producing a book. Accordingly, at the end of the Symposium the Scientific Committee met to discuss the most appropriate format for the book. We wished to avoid the format of the conventional conference book consisting of a large number of short articles of varying quality. It was agreed that instead we should produce a limited number of rigorously refereed and edited articles by selected participants who would aim to sum up the state of the art in their particular research area. The outcome is the present book. Peter W. Ca rpenter, Warwick Timothy J. Pedley, Cambridge May, 2002. VB SCIENTIFIC COMMITTEE Co-Chair: P.W. Carpenter, Engineering, Warwiek, UK Co-Chair: TJ. Pedley, DAMTP, Cambridge, UK V.V. Babenko, Hydromechanics, Kiev, Ukraine R. Bannasch, Bionik & Evolutionstechnik, TU Berlin, Germany C.D. Bertram, Biomedical Engineering, New South Wales, Australia M. Gad-el-Hak, Aerospace & Mechanical Engineering, Notre Dame, USA J.B. Grotberg, Biomedical Engineering, Michigan, USA. R.D. Kamm, Mechanical Engineering, MIT, USA Y. Matsuzaki, Aerospace Engineering, N agoya, Japan P.K. Sen, Applied Mechanics, IIT Delhi, India L. van Wijngaarden, Twente, Netherlands K-S. Yeo, Mechanical Engineering, NU Singapore.

Download or read book Recent Developments in Turbulence Management written by K.-S. Choi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Drag Reduction Meeting has been held on 15th and 16th November 1990 in London. This was the fifth of the annual European meetings on drag reduction in engineering flows. The main objective of this meeting was to discuss up-to-date results of drag reduction research carried out in Europe. The organiser has adopted the philosophy of discussing the yesterday's results rather than the last year's results. No written material has therefore been requested for the meeting. It was only after the meeting the submission of papers was requested to the participants, from which 16 papers were selected for this proceedings volume. The meeting has attracted a record number of participants with a total of 52 researchers from seven European countries, U. K. , France, Germany, the Netherlands, Italy, Switzerland and U. S. S. R. as well as from Japan, Canada and Australia. The subjects covered in this proceedings volume include riblets, LEBUs (Large Eddy Break-Up device), surface roughness, compliant surfaces and polymer additives. Riblets seem to be one of the most extensively studied devices in the past years. Reflecting this situation in the European community, there are six papers on riblets covering their practical applications to aircraft and to a model ship, near-wall coherent structure of the boundary layer and effects of flow three-dimensionality. Possibility of heat-transfer enhancement with riblets and potential use in the laminar flow are also investigated. An analytical model is developed for the boundary-layer with a LEBU device.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulence Structure and Modulation written by Alfredo Soldati and published by Springer Science & Business Media. This book was released on 2001-07-19 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling turbulence is an important issue for a number of technological applications. Several methods to modulate turbulence are currently being investigated. All of them are based on the introduction of some sort of perturbation into the flow field which affect turbulence coherent structures responsible for turbulence transfer mechanisms. The scope of the book is to describe several aspects of turbulence structure and modulation and to explain and discuss the most promising techniques in detail.

Download or read book Boundary Layer Flow over Elastic Surfaces written by Viktor V. Babenko and published by Butterworth-Heinemann. This book was released on 2012-09-29 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: While other methods of drag reduction are well-known in marine R&D and ship design environments worldwide, compliant coating drag reduction remains less well-known and poorly understood. This important book presents cutting-edge techniques and findings from research sources not generally accessible by Western researchers and engineers, aiding the application and further development of this potentially important technology. Beginning with an introduction to drag reduction that places the authors’ work on elastic surfaces and combined techniques in context, the book moves on to provide a comprehensive study of drag reduction through elastic coating with both flow and material properties considered. Coverage includes: Experimental findings around coherent vortical structures (CVS) in turbulent boundary layers and methods of controlling them Static and dynamic mechanical characteristics of elastic composite coatings, as well as new techniques and devices developed for their measurement Combined methods of flow control and drag reduction, including the effect of injection of polymer solutions, elastic coatings and generated longitudinal vortical structures on hydrodynamic resistance Intended as a reference for senior engineers and researchers concerned with the drag reduction and the dynamics of turbulent boundary layer flows, Boundary Layer Flow over Elastic Surfaces provides a unique source of information on compliant surface drag reduction and the experimental techniques around it that have shown measurable and repeatable improvements over recent years. This compilation of research findings and new techniques developed for measurement will aid R&D engineers, naval architects and senior designers in their quest to achieve drag reductions that will deliver significant efficiency savings. Unique source of information on compliant surface drag reduction—an important area of technology with practical application to ships—from otherwise inaccessible research studies Updates the knowledge-base on boundary layer flow and surface friction reduction, critical topics in the global quest for increased ship efficiency and fuel economy Reveals new techniques and devices developed for measurement and provides a comprehensive study of drag reduction through elastic coating with both flow and material properties covered

Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1967-04 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research in Progress written by and published by . This book was released on 1969 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On the Theory of Compliant Wall Drag Reduction in Turbulent Boundary Layers written by Robert L. Ash and published by . This book was released on 1974 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1974 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Viscous Drag Reduction in Boundary Layers written by and published by AIAA. This book was released on 1990 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Collection of Technical Papers written by and published by . This book was released on 1977 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transition and Turbulence Control written by Mohamed Gad-el-Hak and published by World Scientific. This book was released on 2006 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains articles based on lectures given at the Workshop on Transition and Turbulence Control, hosted by the Institute for Mathematical Sciences, National University of Singapore, 8OCo10 December 2004. The lecturers included 13 of the worldOCOs foremost experts in the control of transitioning and turbulent flows. The chapters cover a wide range of subjects in the broad area of flow control, and will be useful to researchers working in this area in academia, government laboratories and industry. The coverage includes control theory, passive, active and reactive methods for controlling transitional and turbulent wall-bounded flows, noise suppression and mixing enhancement of supersonic turbulent jets, compliant coatings, modern flow diagnostic systems, and swept wing instabilities."

Download or read book Experimental Hydrodynamics for Flow Around Bodies written by Viktor V. Babenko and published by Academic Press. This book was released on 2021-01-29 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Hydrodynamics for Flow around Bodies explains complex novel experimental methodologies to solve a wide range of important flow problems in industry and research. The book starts by examining the fundamental physical laws necessary for the optimization of techniques for hydro-aeromechanics, heat engineering, and other disciplines related to flow. The reader is then provided with detailed explanations of novel experimental methods, along with the results of physical research. These results are also necessary for the construction of theoretical models that provide improved descriptions for numerous problems in various scientific fields. Frequent discussions, examples of practical applications throughout the text, and foundational, theoretical materials help a range of readers engage and apply these methods to problems in fields including drag reduction, noiseless movement, optimal maneuvering, intense heat transfer, control of separated vortices, wind power, economical energy consumption, and more. - Provides instructions on the set up of innovative experiments for drag reduction that will be of great interest to researchers in aerospace, marine and automotive engineering - Describes, in detail, a variety of novel experiments to investigate boundary layer flow, together with experimental data that can be used with computational models - Assists with bio-inspired hydrodynamic design by providing models of a waving fin mover and investigations of analogs of hydrobiont skin covers

Download or read book Proceedings of the ASME Aerospace Division written by American Society of Mechanical Engineers. Aerospace Division and published by . This book was released on 1996 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Progress in Astronautics and Aeronautics written by and published by . This book was released on 1963 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: