Download or read book Turbulence and Complex Flow Phenomena in Multi stage Axial Turbomachines written by Joseph Katz and published by . This book was released on 2007 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this project is to measure the flow within axial turbomachines and use the data to address turbulence modeling issues. Measurements are performed in two-stage transparent machines located in an optically index matched facility, which allows unobstructed 2-D and Stereo PIV measurements. Data provide insight on blade-wake, wake- boundary layer and wake-wake interactions. This report examines and elucidates several phenomena: i. Variations in turbulence within a wake generated by an upstream IGV blade while being ingested by a rotor passage; ii. Non-uniform turbulence production and diffusion leading to formation of turbulent hot spots within a rotor wake due to flow non-uniformities generated by upstream wakes; iii. Unsteady flow caused by an upstream wake stabilizes the boundary layer on a rotor blade and reduces its momentum thickness; iv. Comparisons of data covering an entire stage to RANS predictions; and V. Measurements of subgrid-scale stresses and dissipation rate, and comparisons to model predictions as well as associated implications of spatial averaging in followed by ensemble averaging in sustially non-uniform flows.
Download or read book 04 2527 04 2554 written by and published by . This book was released on 2004 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Turbomachinery written by Earl Logan, Jr. and published by CRC Press. This book was released on 2003-05-01 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Handbook of Turbomachinery, Second Edition presents new material on advances in fluid mechanics of turbomachinery, high-speed, rotating, and transient experiments, cooling challenges for constantly increasing gas temperatures, advanced experimental heat transfer and cooling effectiveness techniques, and propagation of wake and pressure disturbances. Completely revised and updated, it offers updated chapters on compressor design, rotor dynamics, and hydraulic turbines and features six new chapters on topics such as aerodynamic instability, flutter prediction, blade modeling in steam turbines, multidisciplinary design optimization.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Dynamics and Heat Transfer of Turbomachinery written by Budugur Lakshminarayana and published by John Wiley & Sons. This book was released on 1995-12-15 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past three decades, information in the aerospace and mechanical engineering fields in general and turbomachinery in particular has grown at an exponential rate. Fluid Dynamics and Heat Transfer of Turbomachinery is the first book, in one complete volume, to bring together the modern approaches and advances in the field, providing the most up-to-date, unified treatment available on basic principles, physical aspects of the aerothermal field, analysis, performance, theory, and computation of turbomachinery flow and heat transfer. Presenting a unified approach to turbomachinery fluid dynamics and aerothermodynamics, the book concentrates on the fluid dynamic aspects of flows and thermodynamic considerations rather than on those related to materials, structure, or mechanical aspects. It covers the latest material and all types of turbomachinery used in modern-day aircraft, automotive, marine, spacecraft, power, and industrial applications; and there is an entire chapter devoted to modern approaches on computation of turbomachinery flow. An additional chapter on turbine cooling and heat transfer is unique for a turbomachinery book. The author has undertaken a systematic approach, through more than three hundred illustrations, in developing the knowledge base. He uses analysis and data correlation in his discussion of most recent developments in this area, drawn from over nine hundred references and from research projects carried out by various organizations in the United States and abroad. This book is extremely useful for anyone involved in the analysis, design, and testing of turbomachinery. For students, it can be used as a two-semester course of senior undergraduate or graduate study: the first semester dealing with the basic principles and analysis of turbomachinery, the second exploring three-dimensional viscid flows, computation, and heat transfer. Many sections are quite general and applicable to other areas in fluid dynamics and heat transfer. The book can also be used as a self-study guide to those who want to acquire this knowledge. The ordered, meticulous, and unified approach of Fluid Dynamics and Heat Transfer of Turbomachinery should make the specialization of turbomachinery in aerospace and mechanical engineering much more accessible to students and professionals alike, in universities, industry, and government. Turbomachinery theory, performance, and analysis made accessible with a new, unified approach For the first time in nearly three decades, here is a completely up-to-date and unified approach to turbomachinery fluid dynamics and aerothermodynamics. Combining the latest advances, methods, and approaches in the field, Fluid Dynamics and Heat Transfer of Turbomachinery features: The most comprehensive and complete coverage of the fluid dynamics and aerothermodynamics of turbomachinery to date A spotlight on the fluid dynamic aspects of flows and the thermodynamic considerations for turbomachinery (rather than the structural or material aspects) A detailed, step-by-step presentation of the analytical and computational models involved, which allows the reader to easily construct a flowchart from which to operate Critical reviews of all the existing analytical and numerical models, highlighting the advantages and drawbacks of each Comprehensive coverage of turbine cooling and heat transfer, a unique feature for a book on turbomachinery An appendix of basic computation techniques, numerous tables, and listings of common terminology, abbreviations, and nomenclature Broad in scope, yet concise, and drawing on the author's teaching experience and research projects for government and industry, Fluid Dynamics and Heat Transfer of Turbomachinery explains and simplifies an increasingly complex field. It is an invaluable resource for undergraduate and graduate students in aerospace and mechanical engineering specializing in turbomachinery, for research and design engineers, and for all professionals who are—or wish to be—at the cutting edge of this technology.
Download or read book ERB Engine Research Building Turbomachinery Facilities written by and published by . This book was released on 1994 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Trends in Fluid Mechanics Research written by F. G. Zhuang and published by Springer Science & Business Media. This book was released on 2009-04-24 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the Fifth International Conference on Fluid Mechanics (ICFM-V), the primary forum for the presentation of technological advances and research results in the fields of theoretical, experimental, and computational Fluid Mechanics. Topics include: flow instability and turbulence, aerodynamics and gas dynamics, industrial and environmental fluid mechanics, biofluid mechanics, geophysical fluid mechanics, plasma and magneto-hydrodynamics, and others.
Download or read book NASA SP written by and published by . This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
Download or read book Turbomachinery Fluid Dynamics and Heat Transfer written by Hah and published by Routledge. This book was released on 2017-10-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This festschrift in honor of Professor Budugur Lakshminarayana's 60th birthday-based on the proceedings of a symposium on Turbomachinery Fluid Dynamics and Heat Transfer held recently at The Pennsylvania State University, University Park-provides authoritative and conclusive research results as well as new insights into complex flow features found in the turbomachinery used for propulsion, power, and industrial applications. Explaining in detail compressors, heat transfer fields in turbines, computational fluid dynamics, and unsteady flows, Turbomachinery Fluid Dynamics and Heat Transfer covers: Mixing mechanisms, annulus wall boundary layers, and the flow field in transonic turbocompressors The numerical implementation of turbulence models in a computer code Secondary flows, film cooling, and thermal turbulence modeling The visualization method of modeling using liquid crystals Innovative techniques in the computational modeling of compressor and turbine flows measurement in unsteady flows as well as axial flows and compressor noise generation And much more Generously illustrated and containing key bibliographic citations, Turbomachinery Fluid Dynamics and Heat Transfer is an indispensable resource for mechanical, design, aerospace, marine, manufacturing, materials, industrial, and reliability engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2002 with total page 1302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unsteady Aerodynamics Aeroacoustics and Aeroelasticity of Turbomachines and Propellers written by H.M. Atassi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first International Symposium on Unsteady Aerodynamics and Aero elasticity of Turbomachines was held in Paris in 1976, and was followed by symposia at Lausanne in 1980, Cambridge in 1984, Aachen in 1987, Bei jing in 1989, and Notre Dame in 1991. The proceedings published following these symposia have become recognized both as basic reference texts in the subject area and as useful guides to progress in the field. It is hoped that this volume, which represents the proceedings of the Sixth International Symposium on Unsteady Aerodynamics of Turbomachines, will continue that tradition. Interest in the unsteady aerodynamics, aeroacoustics, and aeroelasticity of turbomachines has been growing rapidly since the Paris symposium. This expanded interest is reflected by a significant increase in the numbers of contributed papers and symposium participants. The timeliness of the topics has always been an essential objective of these symposia. Another important objective is to promote an international exchange between scien tists and engineers from universities, government agencies, and industry on the fascinating phenomena of unsteady turbomachine flows and how they affect the aeroelastic stability of the blading system and cause the radiation of unwanted noise. This exchange acts as a catalyst for the development of new analytical and numerical models along with carefully designed ex periments to help understand the behavior of such systems and to develop predictive tools for engineering applications.
Download or read book Paper written by and published by . This book was released on 2001 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AGARD Index of Publications written by Organisation du traité de l'Atlantique Nord. Groupe consultatif pour la recherche et le développement aérospatial. Technical Information Panel and published by . This book was released on 1995 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Research Briefs written by Center for Turbulence Research (U.S.) and published by . This book was released on 2007 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
