Download or read book Turbo Decoder Architecture for Beyond 4G Applications written by Cheng-Chi Wong and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most recent techniques for turbo decoder implementation, especially for 4G and beyond 4G applications. The authors reveal techniques for the design of high-throughput decoders for future telecommunication systems, enabling designers to reduce hardware cost and shorten processing time. Coverage includes an explanation of VLSI implementation of the turbo decoder, from basic functional units to advanced parallel architecture. The authors discuss both hardware architecture techniques and experimental results, showing the variations in area/throughput/performance with respect to several techniques. This book also illustrates turbo decoders for 3GPP-LTE/LTE-A and IEEE 802.16e/m standards, which provide a low-complexity but high-flexibility circuit structure to support these standards in multiple parallel modes. Moreover, some solutions that can overcome the limitation upon the speedup of parallel architecture by modification to turbo codec are presented here. Compared to the traditional designs, these methods can lead to at most 33% gain in throughput with similar performance and similar cost.

Download or read book Field Programmable Logic and Applications Reconfigurable Computing Is Going Mainstream written by Manfred Glesner and published by Springer. This book was released on 2003-08-02 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Field-Programmable Logic and Applications, FPL 2002, held in Montpellier, France, in September 2002. The 104 revised regular papers and 27 poster papers presented together with three invited contributions were carefully reviewed and selected from 214 submissions. The papers are organized in topical sections on rapid prototyping, FPGA synthesis, custom computing engines, DSP applications, reconfigurable fabrics, dynamic reconfiguration, routing and placement, power estimation, synthesis issues, communication applications, new technologies, reconfigurable architectures, multimedia applications, FPGA-based arithmetic, reconfigurable processors, testing and fault-tolerance, crypto applications, multitasking, compilation techniques, etc.

Download or read book Advanced Hardware Design for Error Correcting Codes written by Cyrille Chavet and published by Springer. This book was released on 2014-10-30 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides thorough coverage of error correcting techniques. It includes essential basic concepts and the latest advances on key topics in design, implementation, and optimization of hardware/software systems for error correction. The book’s chapters are written by internationally recognized experts in this field. Topics include evolution of error correction techniques, industrial user needs, architectures, and design approaches for the most advanced error correcting codes (Polar Codes, Non-Binary LDPC, Product Codes, etc). This book provides access to recent results, and is suitable for graduate students and researchers of mathematics, computer science, and engineering. • Examines how to optimize the architecture of hardware design for error correcting codes; • Presents error correction codes from theory to optimized architecture for the current and the next generation standards; • Provides coverage of industrial user needs advanced error correcting techniques. Advanced Hardware Design for Error Correcting Codes includes a foreword by Claude Berrou.

Download or read book LTE for 4G Mobile Broadband written by Farooq Khan and published by Cambridge University Press. This book was released on 2009-03-26 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the new technologies of the LTE standard and their impact on system performance improvements with this practical guide.

Download or read book Wireless Transceiver Systems Design written by Wolfgang Eberle and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fields of communication, signal processing, and embedded systems and circuits are brought together in this book. These fields come together with a single design goal, a WLAN transceiver which combines analog and digital design, VLSI and systems design, algorithms and architectures, as well as design and CAD/EDA. This book focuses on the overall approach to design problems and design organization needed for transceiver design. It does not focus on one particular standard.

Download or read book Field programmable Logic and Applications written by and published by . This book was released on 2002 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fourth Generation Wireless Networks Applications and Innovations written by Adibi, Sasan and published by IGI Global. This book was released on 2009-12-31 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourth-Generation Wireless Networks: Applications and Innovations presents a comprehensive collection of recent findings in access technologies useful in the architecture of wireless networks.

Download or read book An Introduction to LTE written by Christopher Cox and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the successful first edition (March 2012), this book gives a clear explanation of what LTE does and how it works. The content is expressed at a systems level, offering readers the opportunity to grasp the key factors that make LTE the hot topic amongst vendors and operators across the globe. The book assumes no more than a basic knowledge of mobile telecommunication systems, and the reader is not expected to have any previous knowledge of the complex mathematical operations that underpin LTE. This second edition introduces new material for the current state of the industry, such as the new features of LTE in Releases 11 and 12, notably coordinated multipoint transmission and proximity services; the main short- and long-term solutions for LTE voice calls, namely circuit switched fallback and the IP multimedia subsystem; and the evolution and current state of the LTE market. It also extends some of the material from the first edition, such as inter-operation with other technologies such as GSM, UMTS, wireless local area networks and cdma2000; additional features of LTE Advanced, notably heterogeneous networks and traffic offloading; data transport in the evolved packet core; coverage and capacity estimation for LTE; and a more rigorous treatment of modulation, demodulation and OFDMA. The author breaks down the system into logical blocks, by initially introducing the architecture of LTE, explaining the techniques used for radio transmission and reception and the overall operation of the system, and concluding with more specialized topics such as LTE voice calls and the later releases of the specifications. This methodical approach enables readers to move on to tackle the specifications and the more advanced texts with confidence.

Download or read book Fundamentals of 5G Communications Connectivity for Enhanced Mobile Broadband and Beyond written by Wanshi Chen and published by McGraw Hill Professional. This book was released on 2021-07-23 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the foundations and applications of 5G technology This comprehensive guide contains practical information from telecommunications experts working at the forefront of 5G innovation. The authors discuss the foundations of 5G technology―not just the new standards, but the reasons and stories behind them. Fundamentals of 5G Communications features coverage of all major vertical domains with a focus on practical, commercial applications. This book serves both as an essential reference for telecom professionals and as a textbook for students learning about 5G. Coverage includes: 5G versus 4G: What’s new? Deployment scenarios and architecture options The evolution of 5G architecture Numerology and slot structure Initial access and mobility Downlink control and data operation Uplink control and data operation Coexistence of 4G and 5G 5G in unlicensed and shared spectra Vertical expansion: URLLC, MTC, V2X Vertical expansion: broadcast and multicast Typical 5G commercial deployments A look toward the future of 5G

Download or read book The Next Generation CDMA Technologies written by Hsiao-Hwa Chen and published by John Wiley & Sons. This book was released on 2007-08-20 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future wireless communication systems should be operating mainly, if not completely, on burst data services carrying multimedia traffic.The need to support high-speed burst traffic has already posed a great challenge to all currently available air-link technologies based either on TDMA or CDMA.The first generation CDMA technology has been used in both 2G and 3G mobile cellular standards and it has been suggested that it is not suitable for high-speed burst-type traffic. There are many problems with the first generation CDMA technology, such as its low spreading efficiency, interference-limited capacity and the need for precision power control, etc... 'The Next Generation Technologies' will offer first-hand information on how to make use of various innovative technologies to implement the next generation CDMA technology. As an all-in-one reference for telecommunications engineers, advanced R & D personnels, undergraduate and postgraduate students, this book is must-read material. Addresses various important issues about the next generation CDMA technologies as the major air-link technology for beyond 3G wireless applications. Covers topics from next generation CDMA system modelling to analytical methodology, starting with the basics and progressing to advanced research topics. Contains many new and previously unpublished research results. Introduces many innovative CDMA technologies such as DS/CC-CDMA, OS/CC-CDMA, space-time complementary coding CDMA, M-ary CDMA, optical complementary coded CDMA, etc.

Download or read book Turbo Codes written by Branka Vucetic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book grew out of our research, industry consulting and con tinuing education courses. Turbo coding initially seemed to belong to a restricted research area, while now has become a part of the mainstream telecommu nication theory and practice. The turbo decoding principles have found widespread applications not only in error control, but in de tection, interference suppression and equalization. Intended for use by advanced students and professional engi neers, involved in coding and telecommunication research, the book includes both basic and advanced material. The chapters are se quenced so that the knowledge is acquired in a logical and progres sive way. The algorithm descriptions and analysis are supported by examples throughout the book. Performance evaluations of the presented algorithms are carried out both analytically and by sim ulations. Basic material included in the book has been taught to students and practicing professionals over the last four years in the form of senior undergraduate or graduate courses, lecture series and short continuing education courses.

Download or read book THz Communications written by Thomas Kürner and published by Springer Nature. This book was released on 2021-12-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of THz communications, spanning the whole range of applications, propagation and channel models, RF transceiver technology, antennas, baseband techniques, and networking interfaces. The requested data rate in wireless communications will soon reach from 100 Gbit/s up to 1 Tbps necessitating systems with ultra-high bandwidths of several 10s of GHz which are available only above 200 GHz. In the last decade, research at these frequency bands has made significant progress, enabling mature experimental demonstrations of so-called THz communications, which are thus expected to play a vital role in future wireless networks. In addition to chapters by leading experts on the theory, modeling, and implementation of THz communication technology, the book also features the latest experimental results and addresses standardization and regulatory aspects. This book will be of interest to both academic researchers and engineers in the telecommunications industry.

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.

Download or read book LTE The UMTS Long Term Evolution written by Stefania Sesia and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Where this book is exceptional is that the reader will not just learn how LTE works but why it works" Adrian Scrase, ETSI Vice-President, International Partnership Projects Following on the success of the first edition, this book is fully updated, covering the latest additions to LTE and the key features of LTE-Advanced. This book builds on the success of its predecessor, offering the same comprehensive system-level understanding built on explanations of the underlying theory, now expanded to include complete coverage of Release 9 and the developing specifications for LTE-Advanced. The book is a collaborative effort of more than 40 key experts representing over 20 companies actively participating in the development of LTE, as well as academia. The book highlights practical implications, illustrates the expected performance, and draws comparisons with the well-known WCDMA/HSPA standards. The authors not only pay special attention to the physical layer, giving an insight into the fundamental concepts of OFDMA-FDMA and MIMO, but also cover the higher protocol layers and system architecture to enable the reader to gain an overall understanding of the system. Key New Features: Comprehensively updated with the latest changes of the LTE Release 8 specifications, including improved coverage of Radio Resource Management RF aspects and performance requirements Provides detailed coverage of the new LTE Release 9 features, including: eMBMS, dual-layer beamforming, user equipment positioning, home eNodeBs / femtocells and pico cells and self-optimizing networks Evaluates the LTE system performance Introduces LTE-Advanced, explaining its context and motivation, as well as the key new features including: carrier aggregation, relaying, high-order MIMO, and Cooperative Multi-Point transmission (CoMP). Includes an accompanying website containing a complete list of acronyms related to LTE and LTE-Advanced, with a brief description of each (http://www.wiley.com/go/sesia_theumts) This book is an invaluable reference for all research and development engineers involved in implementation of LTE or LTE-Advanced, as well as graduate and PhD students in wireless communications. Network operators, service providers and R&D managers will also find this book insightful.

Download or read book Signal Processing for 5G written by Fa-Long Luo and published by John Wiley & Sons. This book was released on 2016-10-17 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and invaluable guide to 5G technology, implementation and practice in one single volume. For all things 5G, this book is a must-read. Signal processing techniques have played the most important role in wireless communications since the second generation of cellular systems. It is anticipated that new techniques employed in 5G wireless networks will not only improve peak service rates significantly, but also enhance capacity, coverage, reliability , low-latency, efficiency, flexibility, compatibility and convergence to meet the increasing demands imposed by applications such as big data, cloud service, machine-to-machine (M2M) and mission-critical communications. This book is a comprehensive and detailed guide to all signal processing techniques employed in 5G wireless networks. Uniquely organized into four categories, New Modulation and Coding, New Spatial Processing, New Spectrum Opportunities and New System-level Enabling Technologies, it covers everything from network architecture, physical-layer (down-link and up-link), protocols and air interface, to cell acquisition, scheduling and rate adaption, access procedures and relaying to spectrum allocations. All technology aspects and major roadmaps of global 5G standard development and deployments are included in the book. Key Features: Offers step-by-step guidance on bringing 5G technology into practice, by applying algorithms and design methodology to real-time circuit implementation, taking into account rapidly growing applications that have multi-standards and multi-systems. Addresses spatial signal processing for 5G, in particular massive multiple-input multiple-output (massive-MIMO), FD-MIMO and 3D-MIMO along with orbital angular momentum multiplexing, 3D beamforming and diversity. Provides detailed algorithms and implementations, and compares all multicarrier modulation and multiple access schemes that offer superior data transmission performance including FBMC, GFDM, F-OFDM, UFMC, SEFDM, FTN, MUSA, SCMA and NOMA. Demonstrates the translation of signal processing theories into practical solutions for new spectrum opportunities in terms of millimeter wave, full-duplex transmission and license assisted access. Presents well-designed implementation examples, from individual function block to system level for effective and accurate learning. Covers signal processing aspects of emerging system and network architectures, including ultra-dense networks (UDN), software-defined networks (SDN), device-to-device (D2D) communications and cloud radio access network (C-RAN).

Download or read book Massive MIMO Systems written by Kazuki Maruta and published by MDPI. This book was released on 2020-07-03 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiple-input, multiple-output (MIMO), which transmits multiple data streams via multiple antenna elements, is one of the most attractive technologies in the wireless communication field. Its extension, called ‘massive MIMO’ or ‘large-scale MIMO’, in which base station has over one hundred of the antenna elements, is now seen as a promising candidate to realize 5G and beyond, as well as 6G mobile communications. It has been the first decade since its fundamental concept emerged. This Special Issue consists of 19 papers and each of them focuses on a popular topic related to massive MIMO systems, e.g. analog/digital hybrid signal processing, antenna fabrication, and machine learning incorporation. These achievements could boost its realization and deepen the academic and industrial knowledge of this field.

Download or read book 5G for the Connected World written by Devaki Chandramouli and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Handbook Demystifies 5G for Technical and Business Professionals in Mobile Telecommunication Fields Much is being said regarding the possibilities and capabilities of the emerging 5G technology, as the evolution towards 5G promises to transform entire industries and many aspects of our society. 5G for the Connected World offers a comprehensive technical overview that telecommunication professionals need to understand and take advantage of these developments. The book offers a wide-ranging coverage of the technical aspects of 5G (with special consideration of the 3GPP Release 15 content), how it enables new services and how it differs from LTE. This includes information on potential use cases, aspects of radio and core networks, spectrum considerations and the services primarily driving 5G development and deployment. The text also looks at 5G in relation to the Internet of Things, machine to machine communication and technical enablers such as LTE-M, NB-IoT and EC-GSM. Additional chapters discuss new business models for telecommunication service providers and vertical industries as a result of introducing 5G and strategies for staying ahead of the curve. Other topics include: Key features of the new 5G radio such as descriptions of new waveforms, massive MIMO and beamforming technologies as well as spectrum considerations for 5G radio regarding all possible bands Drivers, motivations and overview of the new 5G system – especially RAN architecture and technology enablers (e.g. service-based architecture, compute-storage split and network exposure) for native cloud deployments Mobile edge computing, Non-3GPP access, Fixed-Mobile Convergence Detailed overview of mobility management, session management and Quality of Service frameworks 5G security vision and architecture Ultra-low latency and high reliability use cases and enablers, challenges and requirements (e.g. remote control, industrial automation, public safety and V2X communication) An outline of the requirements and challenges imposed by massive numbers of devices connected to cellular networks While some familiarity with the basics of 3GPP networks is helpful, 5G for the Connected World is intended for a variety of readers. It will prove a useful guide for telecommunication professionals, standardization experts, network operators, application developers and business analysts (or students working in these fields) as well as infrastructure and device vendors looking to develop and integrate 5G into their products, and to deploy 5G radio and core networks.