Download or read book Turbine Blade Vibrations of Turbochargers written by V. A. Zastrow and published by . This book was released on 1967 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbomachine Blade Vibration written by J. S. Rao and published by New Age International. This book was released on 1991 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Failures Of Blades Is One Of The Most Vexing Problems Of Turbomachine Manufacturers, Ever Since The Steam Turbine Became The Main Stay For Power Generating Equipment And Gas Turbines Are Increasingly Used In The Air Transport. The Problem Is Very Complex, Involving The Excitation Due To Aerodynamic Stage Interaction; Damping Due To Material Deformation, Friction At Slip Surfaces And Aerodynamic Damping; Vibration Of An Asymmetric Aerofoil Tapered Along Its Length And Mounted On A Rotating Disc At A Stagger Angle. The Problem Is Also Governed By Heat Transfer Analysis And Thermal Stresses.His Book Deals With A Basic Understanding Of Free Vibratory Behaviour Of Turbine Blades- Free Standing, Packetted, And Bladed-Discs. The Analysis Is Based On Continuous And Discrete Models Using Energy Principles And Finite Element Techniques. A Clear Understanding Of The Interference Phenomenon In A Thin Cambered Airfoil Stage In Subsonic Flow Is Presented To Determine The Nonsteady Excitation Forces Acting On The Blades. A Comprehensive Treatment On The Blade Damping Phenomenon That Occurs In Turbines Is Given. The Nonlinear Damping Models Account For Material Damping And Friction Damping As A Function Of Rotational Speed For Each Mode. Resonant Response Calculation Procedures For The Steadily Running As Well As Accelerating Blades Are Given.Cumulative Damage Calculations Are Then Outlined For Fatigue Life Estimation Of Turbomachine Blades. The Book Also Deals With Heat Transfer Analysis And Thermal Stress Calculations Which Help In A Comprehensive Understanding Of The Blade Problems.
Download or read book Prediction of Natural Frequencies of Turbine Blades for Turbocharger Application written by Agnieszka Izabela Zdunek and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Dynamics of Turbo Machines written by A. S. Rangwala and published by New Age International. This book was released on 2009 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: STRUCTURAL DYNAMICS OF TURBO-MACHINES presents a detailed and comprehensive treatment of structural vibration evaluation of turbo-machines. Starting with the fundamentals of the theory of vibration as related to various aspects of rotating machines, the dynamic analysis procedures of a broad spectrum of turbo-machines is covered. An in-depth procedure for analyzing the torsional and flexural oscillations of the components and of the rotor-bearing system is presented. The latest trends in design and analysis are presented, chief among them: Blade and coupled disk-blade mod.
Download or read book Torsional Vibration of Turbo Machinery written by Duncan Walker and published by McGraw Hill Professional. This book was released on 2003-11-21 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration, excessive noise and other dynamics-related problems that limit or prevent operation are a major manufacturing concern in airplanes, auto crankshafts, home appliances, etc. This detailed monograph provides in-depth coverage of state-of-the-art vibration analysis techniques used to prevent design and operational malfunction. * Torsional vibration mathematical modeling * Forced response analysis * Vibration measurement methods and monitoring * Application case studies * SI units used throughout
Download or read book 10th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-05-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the latest international conference, following on from the highly successful previous conferences in this series held regularly since 1978. Papers cover all current and novel aspects of turbocharging systems design for boosting solutions for engine downsizing. The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles. Novel boosting solutions for diesel engines operating in the industrial and marine market sectors are also included. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the transport (land and marine) and industry sectors. In these market sectors the internal combustion engine is the key product where downsizing is the driver for development for both SI and CI engines in the passenger car and commercial vehicle applications. The more stringent future market forces and environmental considerations mean more stringent engine downsizing, thus, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness etc. For large engines the big challenge is to enhance the high specific power and efficiency whilst reducing emission levels (Nox and Sox) with variable quality fuels. This will require turbocharging systems for very high boost pressure, efficiency and a high degree of system flexibility. Presents papers from all the latest international conference Papers cover all aspects of the turbocharging systems design for boosting solutions for engine downsizing The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles
Download or read book 15th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2023-05-05 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institution’s International Conference on Turbochargers and Turbocharging (Twickenham, London, UK, 16-17 May 2023) returns to address the latest advances, research and developments in turbocharging system designs and boosting solutions. This volume presents a peer-reviewed collection of papers which will address current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The latest developments leading to enhanced performance and efficiency, increased durability and reduced emissions in line with meeting Net-Zero and global emissions targets. Topics include: Air management in powertrains: conventional, hybrids, fuel cells and novel configurations Alternate fuels and their needs in boosting (e.g. hydrogen, synthetic fuels) Electrification of turbochargers, compressors, and exhaust turbines Simulation and testing techniques, data analytics, including AI and digital twins Thermal management, waste heat recovery and expanders Turbomachinery aerodynamic: novel compressors & turbines and multi-stage systems. Component fatigue life, bearing design, rotor-dynamics and durability prediction Mechatronics, control, sensors and power electronics High speed turbomachinery in propulsion and power systems Future Legislation needs for thermal propulsion systems
Download or read book Handbook of Turbomachinery written by Earl Logan, Jr. and published by CRC Press. This book was released on 2003-05-01 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Handbook of Turbomachinery, Second Edition presents new material on advances in fluid mechanics of turbomachinery, high-speed, rotating, and transient experiments, cooling challenges for constantly increasing gas temperatures, advanced experimental heat transfer and cooling effectiveness techniques, and propagation of wake and pressure disturbances. Completely revised and updated, it offers updated chapters on compressor design, rotor dynamics, and hydraulic turbines and features six new chapters on topics such as aerodynamic instability, flutter prediction, blade modeling in steam turbines, multidisciplinary design optimization.
Download or read book Unsteady Aerodynamics Aeroacoustics and Aeroelasticity of Turbomachines written by Kenneth C. Hall and published by Springer Science & Business Media. This book was released on 2006-05-11 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a collection of technical papers that were presented at the 10th International Symposium on Unsteady Aerodynamics, Aeroacoustics, and Aeroelasticity of Turbomachines held September 8-11, 2003 at Duke University in Durham, North Carolina. The papers represent the latest in state of the art research in the areas of aeroacoustics, aerothermodynamics, computational methods, experimental testing related to flow instabilities, flutter, forced response, multistage, and rotor-stator effects for turbomachinery.
Download or read book Turbine Blade Vibrations of Turbocharges written by V. A. Zastrow and published by . This book was released on 1967 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1986 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Torsional Vibration of Turbo Machinery written by Duncan Walker and published by McGraw Hill Professional. This book was released on 2003-10-31 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration, excessive noise and other dynamics-related problems that limit or prevent operation are a major manufacturing concern in airplanes, auto crankshafts, home appliances, etc. This detailed monograph provides in-depth coverage of state-of-the-art vibration analysis techniques used to prevent design and operational malfunction. * Torsional vibration mathematical modeling * Forced response analysis * Vibration measurement methods and monitoring * Application case studies * SI units used throughout
Download or read book Fluid Machinery and Fluid Mechanics written by Jianzhong Xu and published by Springer Science & Business Media. This book was released on 2010-07-05 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE)" is the proceedings of 4th International Symposium on Fluid Machinery and Fluid Engineering, held in Beijing November 24-27, 2008. It contains 69 highly informative technical papers presented at the Mei Lecture session and the technical sessions of the symposium. The Chinese Society of Engineering Thermophysics (CSET) organized the First, the Second and the Third International Symposium on Fluid Machinery and Fluid Engineering (1996, 2000 and 2004). The purpose of the 4th Symposium is to provide a common forum for exchange of scientific and technical information worldwide on fluid machinery and fluid engineering for scientists and engineers. The main subject of this symposium is "Fluid Machinery for Energy Conservation". The "Mei Lecture" reports on the most recent developments of fluid machinery in commemoration of the late professor Mei Zuyan. The book is intended for researchers and engineers in fluid machinery and fluid engineering. Jianzhong Xu is a professor at the Chinese Society of Engineering Thermophysics, Chinese Academy of Sciences, Beijing.
Download or read book Materials and Design in Turbo generator Plant written by Oskar Lasche and published by . This book was released on 1927 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Practice in Stress and Vibration Analysis written by J. E. Mottershead and published by Elsevier. This book was released on 2016-06-23 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Practice in Stress and Vibration Analysis documents the proceedings of the conference on Modern Practice in Stress and Vibration Analysis organized by the Stress Analysis Group of the Institute of Physics at the University of Liverpool, 3-5 April 1989. The Group has been known in the UK for its contribution in providing meetings with an emphasis on application, covering topics which range widely to include modern numerical techniques and advanced experimentation. The volume contains 34 papers presented by researchers at the conference covering a wide range of topics such as the application of the sensitivity analysis method to structural dynamics; passive and active vibration control for use in vibration suppression in spacecraft; analysis of an ultrasonically excited thick cylinder; and the prediction of vibrational power transmission through a system of jointed beams carrying longitudinal and flexural waves. It is hoped that the contributions published in this book will be of value to the broad community of practitioners in stress and vibration analysis whom the Stress Analysis Group exists to serve.
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1986-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 1997 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
