Download or read book Tunnel Engineering Handbook written by Thomas R. Kuesel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tunnel Engineering Handbook, Second Edition provides, in a single convenient volume, comprehensive coverage of the state of the art in the design, construction, and rehabilitation of tunnels. It brings together essential information on all the principal classifications of tunnels, including soft ground, hard rock, immersed tube and cut-and-cover, with comparisons of their relative advantages and suitability. The broad coverage found in the Tunnel Engineering Handbook enables engineers to address such critical questions as how tunnels are planned and laid out, how the design of tunnels depends on site and ground conditions, and which types of tunnels and construction methods are best suited to different conditions. Written by the leading engineers in the fields, this second edition features major revisions from the first, including: * Complete updating of all chapters from the first edition * Seven completely new chapters covering tunnel stabilization and lining, difficult ground, deep shafts, water conveyance tunnels, small diameter tunnels, fire life safety, tunnel rehabilitation and tunnel construction contracting *New coverage of the modern philosophy and techniques of tunnel design and tunnel construction contracting The comprehensive coverage of the Tunnel Engineering Handbook makes it an essential resource for all practicing engineers engaged in the design of tunnels and underground construction. In addition, the book contains a wealth of information that government administrators and planners and transportation officials will use in the planning and management of tunnels.
Download or read book Handbook of Tunnel Engineering II written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2014-01-22 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnel engineering is one of the oldest, most interesting but also challenging engineering disciplines and demands not only theoretical knowledge but also practical experience in geology, geomechanics, structural design, concrete construction, machine technology, construction process technology and construction management. The two-volume "Handbuch des Tunnel- und Stollenbaus" has been the standard reference work for German-speaking tunnellers in theory and practice for 30 years. The new English edition is based on a revised and adapted version of the third German edition and reflects the latest state of knowledge. The book is published in two volumes, with the second volume covering both theoretical themes like design basics, geological engineering, structural design of tunnels and monitoring instrumentation, and also the practical side of work on the construction site such as dewatering, waterproofing and scheduling as well as questions of tendering, award and contracts, data management and process controlling. As with volume I, all chapters include practical examples.
Download or read book Tunnel Engineering Handbook written by John O. Bickel and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Tunnel Engineering I written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2013-12-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnel engineering is one of the oldest, most interesting but also challenging engineering disciplines and demands not only theoretical knowledge but also practical experience in geology, geomechanics, structural design, concrete construction, machine technology, construction process technology and construction management. The two-volume "Handbuch des Tunnel- und Stollenbaus" has been the standard reference for German-speaking tunnellers in theory and practice for 30 years. The new English edition is based on a revised and adapted version of the third German edition and reflects the latest state of knowledge. The book is published in two volumes, with the first being devoted to more practical themes of construction and construction process in drill and blast and mechanised tunnelling. Microtunnelling and ventilation are also dealt with. All chapters include practical examples.
Download or read book Tunnel Engineering Handbook written by Thomas R Kuesel and published by . This book was released on 1995-12-31 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Handbook of Tunnel Fire Safety written by Richard Carvel and published by Thomas Telford. This book was released on 2005 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like New, No Highlights,No Markup,all pages are intact.
Download or read book Handbook on Tunnels and Underground Works written by Emilio Bilotta and published by CRC Press. This book was released on 2022-02-23 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a new, global, updated, thorough, clear and practical risk-based approach to tunnelling design and construction methods, and discusses detailed examples of solutions applied to relevant case histories. It is organized in three sequential and integrated volumes: Volume 1: Concept – Basic Principles of Design Volume 2: Construction – Methods, Equipment, Tools and Materials Volume 3: Case Histories and Best Practices The book covers all aspects of tunnelling, giving useful and practical information about design (Volume 1), construction (Volume 2) and best practices (Volume 3). It provides the following features and benefits: updated vision on tunnelling design, tools, materials and construction balanced mix of theory, technology and applied experience different and harmonized points of view from academics, professionals and contractors easy consultation in the form of a handbook risk-oriented approach to tunnelling problems. The tunnelling industry is amazingly widespread and increasingly important all over the world, particularly in developing countries. The possible audience of the book are engineers, geologists, designers, constructors, providers, contractors, public and private customers, and, in general, technicians involved in the tunnelling and underground works industry. It is also a suitable source of information for industry professionals, senior undergraduate and graduate students, researchers and academics.
Download or read book Handbook of tunnel engineering written by Bernhard Maidl and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Tunnel Construction written by Gary B. Hemphill and published by John Wiley & Sons. This book was released on 2012-10-05 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only modern guide to all aspects of practical tunnel construction Practical Tunnel Construction fills a void in the literature for a practical guide to tunnel construction. By taking the reader through a brief introduction and history to a comprehensive discussion of how the geological factors affect tunneling, the author covers the stages and technology that are common today without using complex equations. Written for the individual who does not have an extensive background in tunneling but who has to make tunneling decisions, the various tunneling methods are discussed to help in the determination of the appropriate method. The methods discussed are: hand mining, drill/blast, Tunnel Boring Machine (TBM), New Austrian Tunnelling Method (NATM), Norwegian Method of Tunnelling (NMT), Roadheader, Earth Pressure Balance Machine (EPBM), and Slurry Pressure Balance Machine (SPBM). This book focuses on driven tunnels. This versatile handbook: Offers clear and accessible coverage of the state of the art in tunnel construction Introduces the essentials of design and construction of many types of tunnels, including TBM, EPB, Roadheader, NATM, drill and blast, and soft ground tunneling Provides nontechnical guidance on selecting the most appropriate tunneling methods for various situations Includes a brief history of tunneling and an introduction to geotechnical considerations Discusses tunnel access shaft construction, mucking methods, tunnel haulage, grout, water handling, and much more Practical Tunnel Construction is an important resource for students, construction managers, tunnel designers, municipal engineers, or engineers who are employed by government agencies or corporations that are exploring the feasibility of planning and designing or building a tunnel.
Download or read book Shield Tunnel Engineering written by Shuying Wang and published by Elsevier. This book was released on 2021-08-17 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shield Tunnel Engineering: From Theory to Practice is a key technique that offers one of the most important ways to build tunnels in fast, relatively safe, and ecologically friendly ways. The book presents state-of-the-art solutions for engineers working within the field of shield tunnelling technology for railways. It includes expertise from major projects in shield tunnel construction for high-speed rail, subways and other major projects. In particular, it presents a series of advances in shield muck conditioning technology, slurry treatment, backfill grouting, and environmental impact and control. In this volume, foundational knowledge is combined with the latest advances in shield tunnel engineering. Twelve chapters cover key areas including geological investigation, the types, structures and workings of shield machines, selecting a machine, shield segment design, shield tunnelling parameter control, soil conditioning for earth pressure balance (EPB) shield tunnelling, shield slurry treatment, backfill grouting, environmental impact, and problems in shield tunnel structures and their amelioration. This book presents the essential knowledge needed for shield tunnel engineering, the latest advances in the field, and practical guidance for engineers. Presents the foundational concepts of shield tunnel engineering Gives the latest advances in shield tunnel engineering techniques Considers common problems in shield tunnel structures and their solutions Lays out step-by-step guidance for engineers working with shield tunnelling Assesses environmental impacts and their control in shield tunnel engineering
Download or read book Introduction to Tunnel Construction written by David Chapman and published by CRC Press. This book was released on 2017-11-27 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.
Download or read book Practical Guide to Rock Tunneling written by Dean Brox and published by CRC Press. This book was released on 2017-04-11 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Practical Guide to Rock Tunneling fills an important void in the literature for a practical guide to the design and construction of tunnels in rock. Practical Guide to Rock Tunneling takes the reader through all the critical steps of the design and construction for rock tunnels starting from geotechnical site investigations through to construction supervision. The guide provides suggestions and recommendations for practitioners on special topics of laboratory testing, durability of rock and acceptance for unlined water conveyance tunnels, overstressing or deep and long tunnels, risk-based evaluation of excavation methods, contract strategies, and post-construction inspections. Key considerations and lessons learned from selected case projects are presented based on the author’s extensive international experience of over 30 years and 1000 km of tunneling for civil, hydropower, and mining infrastructure, including some of the most recognized projects in the world to date. Instead of revisiting all theory and concepts that can be found in other sources, this book contains the hard learned lessons from the author’s experience in the field of Rock Tunneling, gathered over 30 years of service.
Download or read book Tunnel Fire Dynamics written by Haukur Ingason and published by Springer Nature. This book was released on with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tunnelling written by Alan Muir Wood and published by CRC Press. This book was released on 2000-03-09 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling has become a fragmented process, excessively influenced by lawyers'notions of confrontational contractual bases. This prevents the pooling of skills, essential to the achievement of the promoters' objectives. Tunnelling: Management by Design seeks the reversal of this trend. After a brief historical treatment of selected developments, th
Download or read book SME Mining Engineering Handbook Third Edition written by Peter Darling and published by SME. This book was released on 2011 with total page 1912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the SME Mining Engineering Handbook reaffirms its international reputation as "the handbook of choice" for today's practicing mining engineer. It distills the body of knowledge that characterizes mining engineering as a disciplinary field and has subsequently helped to inspire and inform generations of mining professionals.Virtually all of the information is original content, representing the latest information from more than 250 internationally recognized mining industry experts. Within the handbook's 115 thought-provoking chapters are current topics relevant to today's mining professional: Analyzing how the mining and minerals industry will develop over the medium and long term--why such changes are inevitable, what this will mean in terms of challenges, and how they could be managed Explaining the mechanics associated with the multifaceted world of mine and mineral economics, from the decisions associated with how best to finance a single piece of high-value equipment to the long-term cash-flow issues associated with mine planning at a mature operation Describing the recent and ongoing technical initiatives and engineering developments in relation to robotics, automation, acid rock drainage, block caving optimization, or process dewatering methods Examining in detail the methods and equipment available to achieve efficient, predictable, and safe rock breaking, whether employing a tunnel boring machine for development work, mineral extraction using a mobile miner, or cast blasting at a surface coal operation Identifying the salient points that dictate which is the safest, most efficient, and most versatile extraction method to employ, as well as describing in detail how each alternative is engineered Discussing the impacts that social and environmental issues have on mining from the pre-exploration phase to end-of-mine issues and beyond, and how to manage these two increasingly important factors to the benefit of both the mining companies and other stakeholders
Download or read book Jacked Tunnel Design and Construction written by Marco D. Boscardin and published by . This book was released on 1999 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the new Central Artery Project in Boston, tunnel jacking--a technique used primarily in Europe and Asia for constructing underground openings without surface disruption--has come to the US on a grand scale. Three illustrated October 1998 session papers detail developments in tunnel jacking design and above-ground movement monitoring. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Handbook of Mining and Tunnelling Machinery written by Barbara Stack and published by John Wiley & Sons. This book was released on 1982 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
