Download or read book Tunnel Boring Machine Performance and Ground Properties written by J. M. Morgan and published by . This book was released on 1979 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TBM Tunnelling in Jointed and Faulted Rock written by Nick R. Barton and published by CRC Press. This book was released on 2000-01-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide describes the stage-by-stage development of a method for predicting the penetration rate (PR) and the advance rate (AR) for tunnel boring machines based on an expanded version of the Q-value, QTBM. The author analyzes 145 TBM tunnels that total 1,000km in length. He then develops simple formulae to estimate PR and AR from the QTBM value and to back-calculate QTBM from performance data. The book quantitatively explains actual advance rates as high as five m/hr for one day or as low as 0.005 m/hr for several months. It also covers logging methods, empirical TBM tunnel support design, and numerical verification of support.
Download or read book Tunnelling Contracts and Site Investigation written by Dr P.B. Attewell and published by CRC Press. This book was released on 1995-08-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide ranging and up-to-date review of experience of tunnelling contracts, particularly those for sewerage and drainage tunnels. The review is based on the 6th edition of the ICE Conditions of Contract, but it takes note of new forms of contract which are leading towards less adversarial contractual relations.^
Download or read book Rock Engineering in Difficult Ground Conditions Soft Rocks and Karst written by Ivan Vrkljan and published by CRC Press. This book was released on 2009-10-14 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering in Difficult Ground Conditions - Soft Rocks and Karst contains the Proceedings of the Regional Symposium of the International Society for Rock Mechanics (ISRM), which was held 29 to 31 October 2009 in Cavtat near Dubrovnik, Croatia. It is a continuation of the successful series of regional ISRM symposia for Europe, which began in 1
Download or read book Hardrock Tunnel Boring Machines written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of tunneling machine technology: drilling, tunneling, waste removal and securing. It treats methods of rock classification for the machinery concerned as well as legal issues, using numerous example projects to reflect the state of technology, as well as problematic cases and solutions. The work is structured such that readers are led from the basics via the main functional elements of tunneling machinery to the different types of machine, together with their areas of application and equipment. The result is an overview of current developments. Close cooperation among the authors involved has created a book of equal interest to experienced tunnelers and newcomers.
Download or read book North American Tunneling 2022 Proceedings written by Paul Madsen and published by Society for Mining, Metallurgy & Exploration. This book was released on 2022-06-03 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your timely source for more cost-effective and less disruptive solutions to your underground infrastructure needs. The North American Tunneling Conference is the premier biennial tunneling event for North America, bringing together the brightest, most resourceful, and innovative minds in the tunneling industry. It underscores the important role that the industry plans in the development of underground spaces, transportation and conveyance systems, and other forms of sustainable underground infrastructure. With every conference, the number of attendees and breadth of topics grows. The authors—expert and leaders in the industry—share the latest case histories, expertise, lessons learned, and real-world applications from around the globe. Crafted from a collection of 92 papers presented at the conference, this book takes you deep inside the projects. It includes sections on technology, planning, design, and case histories.
Download or read book Mechanised Shield Tunnelling written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2013-05-20 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanised shield tunnelling has developed considerably since the publication of the first edition of this book. Challenging tunnel projects under difficult conditions demand innovative solutions, which has led to constant further development and innovation in process technology, constructions operations and the machines and materials used. The book collects the latest state of technology in mechanised shield tunnelling. It describes the basics of mechanised tunnelling technology and the various types of machines and gives calculation methods and constructural advice. Further chapters cover excavation tools, muck handling, tunnel support, surveying and steering as well as workplace safety. There is also detailled information about contractual aspects and process controlling.
Download or read book Excavation Support and Monitoring written by J.A. Hudson and published by Elsevier. This book was released on 2016-04-06 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.850 pages
Download or read book Mechanized Tunnelling in Urban Areas written by Vittorio Guglielmetti and published by CRC Press. This book was released on 2008-01-07 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internationally, the mechanized excavation of tunnels has intensified in the last two decades, as the number of tunnels being constructed for subways and railway underpasses increases. The subject of mechanized tunnelling in urban areas has not previously received the attention that it deserves, despite there being specific hazards associated with the construction of tunnels in metropolitan areas, including poor ground conditions, water tables higher than the level of tunnels, and subsidence leading to damage to the existing structures on the surface. The application of technologies for achieving the stability of the tunnel and for minimizing surface settlement is described in this book. Accurate characterization of the ground; rigorous assessment and management of risk from design to maintenance; the correct choice of a tunnel boring machine and a plan for the advancement of the tunnel; specific excavation procedures and real-time monitoring of excavation parameters are all discussed in this thorough work.
Download or read book Tunneling Machine Research written by Parviz F. Rad and published by . This book was released on 1974 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Classification of Rock Masses for the Design of Tunnel Support written by Nicholas Barton and published by . This book was released on 1974 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Klaas Jan Bakker and published by CRC Press. This book was released on 2013-05-23 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable source of reference on the current practices of analysis, design and construction of tunnels and underground structures in soft ground. This collection of reviewed papers covers a wide range of tunnelling practice, from deep excavations in Singapore to the construction of a new metro line in Barcelona. The international scope of the contributors makes this a truly comprehensive collection of work on the geotechnical aspects of soft ground excavation.
Download or read book Re claiming the Underground Space written by Jan Saveur and published by CRC Press. This book was released on 2003 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers, presented at the ITA World Tunnelling Congress 2003 held in Amsterdam, which reflects the state of the art with regard to research, analysis, design and practical experience in almost all fields of tunnelling and underground space construction.
Download or read book The Encyclopedia of Applied Geology written by Charles W. Finkl and published by Springer. This book was released on 1984-07-31 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Applied Geology is an international compendium of engineering geology topics prepared by experts from many countries. The volume contains more than eighty main entries in alphabetical order, dealing with hydrology, rock structure monitoring and soil mechanics in addition to engineering geology. Special topics focus on earth science information and sources, electrokinetics, forensic geology, geocryology, nuclear plant siting, photogrammetry, tunnels and tunnelling, urban geomorphology and well data systems.
Download or read book Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on 2019-11-28 with total page 1417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).
Download or read book Mechanical Excavation in Mining and Civil Industries written by Nuh Bilgin and published by CRC Press. This book was released on 2013-12-05 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The secret to streamlined scheduling of mining and civil engineering projects is a solid understanding of the basic concepts of rock cutting mechanics. Comparing theoretical values with experimental and real-world results, Mechanical Excavation in Mining and Civil Industries thoroughly explains various rock cutting theories developed for chisel, conical, disc, and button cutters. The authors provide numerical examples on the effect of independent variables on dependent variables, as well as numerical and solved examples from real-life mining and civil engineering projects using equipment such as: Hard- and soft-ground tunnel boring machines (TBMs) Roadheaders Shearers Ploughs Chain saws Raise borers Impact hammers Large-diameter drill rigs Microtunnel boring machines This book assists students and practicing engineers in selecting the most appropriate machinery for a specific job and predicting machine performance to ensure efficient extraction, and offers background information on rock cutting mechanics and different mechanical miners.
Download or read book Applications of Artificial Intelligence in Tunnelling and Underground Space Technology written by Danial Jahed Armaghani and published by Springer Nature. This book was released on 2021-03-13 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the tunnel boring machine (TBM) performance classifications, empirical models, statistical and intelligent-based techniques which have been applied and introduced by the researchers in this field. In addition, a critical review of the available TBM performance predictive models will be discussed in details. Then, this book introduces several predictive models i.e., statistical and intelligent techniques which are applicable, powerful and easy to implement, in estimating TBM performance parameters. The introduced models are accurate enough and they can be used for prediction of TBM performance in practice before designing TBMs.
