Download or read book Tunable Micromachined Microwave Devices written by Arturo A. Ayón and published by . This book was released on 1996 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromachined Circuits and Devices written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2022-02-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of different switching and resonant devices using the present state-of-the-art radio frequency (RF) micromachining (MEMS) technology. Different topologies of MEMS switches have been discussed considering optimum performances over microwave to millimeter wave frequency range. Wide varieties of micromachined switching networks starting from single-pole-double-throw (SPDT) to single-pole-fourteen-throw (SP14T) are discussed utilizing vertical and lateral actuation movements of the switch. Different transduction mechanisms of micromachined resonators are highlighted that includes capacitive, piezoelectric, and piezoresistive types. The book provides major design guidelines for the development of MEMS-based digital phase shifters, tunable filters, and antennas with extensive measurement data. Apart from the radio frequency (RF) requirements, an extensive guideline is given for the improvement of the reliability of micromachined switches and digital phase shifters where multiple switches are operating simultaneously. It takes multiple iterations and extensive characterizations to conclude with a reliable MEMS digital phase shifter, and these aspects are given one of the prime attentions in this book. Detailed performance analysis of metamaterial inspired MEMS switches is then discussed for application in millimeter wave frequency bands up to about 170 GHz. The book concludes with future research activities of RF MEMS technology and its potential in space, defense, sensors, and biomedical applications.
Download or read book Microwave tunable straight edge resonator on silicon membrane written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the experimental realization and the performances of a magnetostatic microwave straight edge tunable resonator (SER) placed on a silicon membrane. The aim of this approach is to study a miniaturised device, integrable in a planar micromachined microwave circuit. S11 and S21 parameters of this device are presented for different magnetic bias fields, exhibiting frequency tunability between 4.2 GHz and 7.25 GHz. The utilization of silicon membranes to support these devices offers important openings toward the integration of magnetostatic wave devices with micromachined structures.
Download or read book Introduction to Microelectromechanical Microwave Systems written by Héctor J. de los Santos and published by Artech House. This book was released on 2004 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The second edition covers the latest in fabrication technologies, actuation mechanisms, packaging, switching, resonator design, and microwave and wireless applications. This practical book steers readers past the drawbacks and towards the benefits of integrating RF/microwave MEMS into communications equipment
Download or read book Micromachined Microwave Devices and Circuits written by D. Dascalu and published by Editura Academiei Romane. This book was released on 2002 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this book, new results on the development of micromachined circuits in the millimeter wave range, based on micromachining of Silicon as well as of III-V compounds, are presented. Original approach in design using high performance electromagnetic simulation software is also well illustrated. Electrical and microphysical characterization methods are included. The authors are representative for the European activities in the so-called ""RF MEMS"" (Radio-Frequency Micro-Electro-Mechanical Systems) field, a very hot topic in research and development."
Download or read book Ferroelectrics in Microwave Devices Circuits and Systems written by Spartak Gevorgian and published by Springer Science & Business Media. This book was released on 2009-05-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s wireless communications and information systems are heavily based on microwave technology. Current trends indicate that in the future along with - crowaves, the millimeter wave and Terahertz technologies will be used to meet the growing bandwidth and overall performance requirements. Moreover, motivated by the needs of the society, new industry sectors are gaining ground; such as wi- less sensor networks, safety and security systems, automotive, medical, envir- mental/food monitoring, radio tags etc. Furthermore, the progress and the pr- lems in the modern society indicate that in the future these systems have to be more user/consumer friendly, i. e. adaptable, reconfigurable and cost effective. The mobile phone is a typical example which today is much more than just a phone; it includes a range of new functionalities such as Internet, GPS, TV, etc. To handle, in a cost effective way, all available and new future standards, the growing n- ber of the channels and bandwidth both the mobile handsets and the associated systems have to be agile (adaptable/reconfigurable). The complex societal needs have initiated considerable activities in the field of cognitive and software defined radios and triggered extensive research in adequate components and technology platforms. To meet the stringent requirements of these systems, especially in ag- ity and cost, new components with enhanced performances and new functionalities are needed. In this sense the components based on ferroelectrics have greater - tential and already are gaining ground.
Download or read book RF and Microwave Passive and Active Technologies written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the high frequency world, the passive technologies required to realize RF and microwave functionality present distinctive challenges. SAW filters, dielectric resonators, MEMS, and waveguide do not have counterparts in the low frequency or digital environment. Even when conventional lumped components can be used in high frequency applications, their behavior does not resemble that observed at lower frequencies. RF and Microwave Passive and Active Technologies provides detailed information about a wide range of component technologies used in modern RF and microwave systems. Updated chapters include new material on such technologies as MEMS, device packaging, surface acoustic wave (SAW) filters, bipolar junction and heterojunction transistors, and high mobility electron transistors (HMETs). The book also features a completely rewritten section on wide bandgap transistors.
Download or read book RF MEMS and Their Applications written by Vijay K. Varadan and published by John Wiley & Sons. This book was released on 2003-07-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) refer to a collection of micro-sensors and actuators, which can react to environmental change under micro- circuit control. The integration of MEMS into traditional Radio Frequency (RF) circuits has resulted in systems with superior performance levels and lower manufacturing costs. The incorporation of MEMS based fabrication technologies into micro and millimeter wave systems offers viable routes to ICs with MEMS actuators, antennas, switches and transmission lines. The resultant systems operate with an increased bandwidth and increased radiation efficiency and have considerable scope for implementation within the expanding area of wireless personal communication devices. This text provides leading edge coverage of this increasingly important area and highlights the overlapping information requirements of the RF and MEMS research and development communities. * Provides an introduction to micromachining techniques and their use in the fabrication of micro switches, capacitors and inductors * Includes coverage of MEMS devices for wireless and Bluetooth enabled systems Essential reading for RF Circuit design practitioners and researchers requiring an introduction to MEMS technologies, as well as practitioners and researchers in MEMS and silicon technology requiring an introduction to RF circuit design.
Download or read book Novel Technologies for Microwave and Millimeter Wave Applications written by Jean-Fu Kiang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Technologies for Microwave and Millimeter-Wave Applications provides an overview of current research status in selected field, to facilitate a learning process from concepts to practices, from component design to system architecture, and from small scale to large scale. Each chapter focuses on a topic and is organized to be self-sufficient. Contents in each chapter include concise description of relevant background information, major issues, current trend and future challenges. Useful references are also listed for further reading. Novel Technologies for Microwave and Millimeter-Wave Applications is suitable as a textbook for senior or graduate courses in microwave engineering.
Download or read book Microwave Material Applications Device Miniaturization and Integration written by David B. Cruickshank and published by Artech House. This book was released on 2016-10-31 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new resource based on the classic Artech House title, Microwave Materials for Wireless Applications, introduces the use of new microwave materials for passive devices including ferrites, magnetization garnets, dielectric materials, and absorbers for wireless and antenna applications. This book explores a new set of magnetic and dielectric materials that assist with size reduction of passive devices such as ferrite isolators and circulators. Revised data on the applications of absorbers, including examples of different combinations of magnetic, dielectric, and absorber materials into integrated devices is presented. Meta-materials for antennas and potential antenna integration onto soft boards or LTCC filter technologies using tunable devices with new materials are covered. Professionals learn how new material designs use properties of certain ions in oxide compounds to reduce their physical size, including in cellular base stations designed for 4G and 5G cell phone communication systems. This book exhibits how the integration of new materials into cellular systems using common transmission lines will further save size and reduce complexity. New technologies are presented demonstrating the use of sol-gel processing and ceramic processing in the use of low temperature co-fired ceramics, plastic molding, and 3D printing demonstrating improved device designs.
Download or read book Reconfigurable Circuits and Technologies for Smart Millimeter Wave Systems written by Philippe Ferrari and published by . This book was released on 2022-05-25 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the theory, modeling, and design of tunable mm-wave circuits and systems using CMOS, RF MEMS, and microwave liquid crystals.
Download or read book Frontiers In Electronics Future Chips Proceedings Of The 2002 Workshop On Frontiers In Electronics Wofe 02 written by Yoon Soo Park and published by World Scientific. This book was released on 2003-01-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2002 Workshop on Frontiers in Electronics was the third in the series of WOFE workshops. Over 70 leading experts from academia, industry, and government agencies reported on the most recent developments in their fields and exchanged views on future trends and directions of the electronics and photonics industry. The issues they addressed ranged from system-on-chip to DNA doping, from ultrathin SOI to electrotextiles, from photonics integration on the ULSI platform to wide band gap semiconductor devices and solid state lighting. The rapid pace of electronic technology evolution compels a merger of different technical areas, and WOFE-02 provided a unique opportunity for cross-fertilization of the emerging fields of microelectronics, photonics, and nanoelectronics. The workshop was informal and stimulated provocative views, visionary outlooks, and discussions on controversial issues.
Download or read book RF Technologies for Low Power Wireless Communications written by Tatsuo Itoh and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of microwave technology tailored for professionals in wireless communications RF Technologies for Low Power Wireless Communications updates recent developments in wireless communications from a hardware design standpoint and offers specialized coverage of microwave technology with a focus on the low power wireless units required in modern wireless systems. It explores results of recent research that focused on a holistic, integrated approach to the topics of materials, devices, circuits, modulation, and architectures rather than the more traditional approach of research into isolated topical areas. Twelve chapters deal with various fundamental research aspects of low power wireless electronics written by world-class experts in each field. The first chapter offers an overview of wireless architecture and performance, followed by detailed coverage of: Advanced GaAs-based HBT designs InP-based devices and circuits Si/SiGe HBT technology Noise in GaN devices Power amplifier architectures and nonlinearities Planar-oriented components MEMS and micromachined components Resonators, filters, and low-noise oscillators Antennas Transceiver front-end architectures With a clear focus and expert contributors, RF Technologies for Low Power Wireless Communications will be of interest to a wide range of electrical engineering disciplines working in wireless technologies.
Download or read book Microwave Filters for Communication Systems written by Richard J. Cameron and published by John Wiley & Sons. This book was released on 2018-04-17 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth look at the state-of-the-art in microwave filter design, implementation, and optimization Thoroughly revised and expanded, this second edition of the popular reference addresses the many important advances that have taken place in the field since the publication of the first edition and includes new chapters on Multiband Filters, Tunable Filters and a chapter devoted to Practical Considerations and Examples. One of the chief constraints in the evolution of wireless communication systems is the scarcity of the available frequency spectrum, thus making frequency spectrum a primary resource to be judiciously shared and optimally utilized. This fundamental limitation, along with atmospheric conditions and interference have long been drivers of intense research and development in the fields of signal processing and filter networks, the two technologies that govern the information capacity of a given frequency spectrum. Written by distinguished experts with a combined century of industrial and academic experience in the field, Microwave Filters for Communication Systems: Provides a coherent, accessible description of system requirements and constraints for microwave filters Covers fundamental considerations in the theory and design of microwave filters and the use of EM techniques to analyze and optimize filter structures Chapters on Multiband Filters and Tunable Filters address the new markets emerging for wireless communication systems and flexible satellite payloads and A chapter devoted to real-world examples and exercises that allow readers to test and fine-tune their grasp of the material covered in various chapters, in effect it provides the roadmap to develop a software laboratory, to analyze, design, and perform system level tradeoffs including EM based tolerance and sensitivity analysis for microwave filters and multiplexers for practical applications. Microwave Filters for Communication Systems provides students and practitioners alike with a solid grounding in the theoretical underpinnings of practical microwave filter and its physical realization using state-of-the-art EM-based techniques.
Download or read book Innovations in Ultra Wideband Technologies written by Albert Sabban and published by BoD – Books on Demand. This book was released on 2021-07-28 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses innovation in ultra-wideband (UWB) technologies and systems. Divided into four sections, the volume introduces UWB technologies and RF modules, examines applications of these systems in areas such as medicine and sports, and discusses the importance of an accurate design of microwave modules and antennas.
Download or read book Fundamentals of Micro Optics written by Hans Zappe and published by Cambridge University Press. This book was released on 2010-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: From optical fundamentals to advanced applications, this comprehensive guide to micro-optics covers all the key areas for those who need an in-depth introduction to micro-optic devices, technologies, and applications. Topics covered range from basic optics, optical materials, refraction, and diffraction, to micro-mirrors, micro-lenses, diffractive optics, optoelectronics, and fabrication. Advanced topics, such as tunable and nano-optics, are also discussed. Real-world case studies and numerous worked examples are provided throughout, making complex concepts easier to follow, whilst an extensive bibliography provides a valuable resource for further study. With exercises provided at the end of each chapter to aid and test understanding, this is an ideal textbook for graduate and advanced undergraduate students taking courses in optics, photonics, micro-optics, microsystems, and MEMs. It is also a useful self-study guide for research engineers working on optics development.
Download or read book MEMS and Nanotechnology Based Sensors and Devices for Communications Medical and Aerospace Applications written by A. R. Jha and published by CRC Press. This book was released on 2008-04-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of microelectromechanical systems (MEMS) and nanotechnology (NT) in sensors and devices significantly reduces their weight, size, power consumption, and production costs. These sensors and devices can then play greater roles in defense operations, wireless communication, the diagnosis and treatment of disease, and many more applicat