Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.
Download or read book Pillared Clays and Related Catalysts written by Antonio Gil and published by Springer Science & Business Media. This book was released on 2010-08-28 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first works introducing the aluminum intercalated clay family in the early 1970s, interest in the synthesis of pillared interlayered clays has increased tremendously, especially research into the properties and applications of new synthesis methods. The need for solids that could be used as cracking catalysts with larger pores than zeolitic materials has spurred the synthesis of new porous materials from clays. Pillared Clays and Related Catalysts reviews the properties and applications of pillared clays and other layered materials used as catalysts, focusing on: the acidity of pillared clays and the effect it has on catalytic performance the use of pillared clays as supports for catalytically active phases, and the use of the resulting solids in environmentally friendly reactions the applications of the selective reduction of NOx the comparison between the reactions of pillared clays and anionic clays.
Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.
Download or read book Exchange Reactions written by and published by . This book was released on 1965 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Industrial Chemistry written by Fabrizio Cavani and published by John Wiley & Sons. This book was released on 2009-09-22 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the need for sustainable process design and alternative reaction routes to reduce industry?s impact on the environment has gained vital importance. The book begins with a general overview of new trends in designing industrial chemical processes which are environmentally friendly and economically feasible. Specific examples written by experts from industry cover the possibilities of running industrial chemical processes in a sustainable manner and provide an up-to-date insight into the main concerns, e.g., the use of renewable raw materials, the use of alternative energy sources in chemical processes, the design of intrinsically safe processes, microreactor and integrated reaction/ separation technologies, process intensification, waste reduction, new catalytic routes and/or solvent and process optimization.
Download or read book Modern Styrenic Polymers written by John Scheirs and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title addresses the latest developments in the field, covering the major advances that have occurred over the past five years in the polymerization and structure of new generation polystyrenes that are broadening its scope of application. It covers the advent of branched polystyrenes, syndiotactic polystyrene, high-molecular weight general purpose PS, styrenic interpolymers, and clear SBS copolymers Presents voluminous research previously only reported at conferences in one reference Unique coverage of a topic not found in the field
Download or read book Advanced Heterogeneous Catalysts Volume 1 written by Sudarsanam Putla and published by ACS Symposium. This book was released on 2021-05-07 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and applications of nanosized catalysts Over the last five years, tremendous advances have been made in heterogeneous catalysis. In particular, catalysts' design from the bulk to nano-scale (1-100 nm), with desirable active sites, has received great attention in current catalysis research with the aim to fill the gap between homogeneous and heterogeneous catalysis. This volume focuses on applications of nanosized catalysts. Articles describe characterization, synthesis, and applications in biomass conversion, auto-exhaust purification, selective oxidation/hydrogenation, syngas conversion, and other important reactions. Readers will find examples of catalysts designed to be tunable for specific outcomes, inspiring their research. Scientists and engineers in chemistry, materials science, nanotechnology, and chemical engineering will find this volume useful.
Download or read book Encyclopedia of American Business History written by Charles R. Geisst and published by Infobase Publishing. This book was released on 2014-05-14 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an alphabetically-arranged reference to the history of business and industry in the United States. Includes selected primary source documents.
Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2013-09-16 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines. - First book to explore the production and applications of macro-scale materials made from nano-scale particles - Sets out the processes for producing macro-scale materials from carbon nanotubes, and describes the unique properties of these materials - Potential applications for CNT fiber/yarn include replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others
Download or read book Immobilized Catalysts written by Andreas Kirschning and published by Springer Science & Business Media. This book was released on 2004-11-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: R. Haag, S. Roller: Polymeric Supports for the Immobilisation of Catalysts .- J. Horn, F. Michalek, C.C. Tzschucke, W. Bannwarth: Non-Covalently Solid-Phase Bound Catalysts for Organic Synthesis .- Y. Uozumi: Recent Progress in Polymeric Palladium Catalysts for Organic Synthesis .- D.E. Bergbreiter, J. Li: Applications of Catalysts on Soluble Supports .- B. Desai, C.O. Kappe: Microwave-Assisted Synthesis Involving Immobilized Catalysts .- A. Kirschning, G. Jas: Applications of Immobilized Catalysts in Continuous Flow Processes .- N. End, K.-U. Schöning: Immobilized Catalysts in Industrial Research and Application .- N. End, K.-U. Schöning: Immobilized Biocatalysts in Industrial Research and Production
Download or read book Applications of Carbon Nanotubes written by Ajay Kumar Mishra and published by Nova Science Publishers. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery of carbon nanotubes has opened new windows for numerous applications in many disciplines of nanoscience and nanotechnology. Carbon nanotubes consist of graphene sheets in the form of sp2 hybridized carbon atoms. These materials have gained the interest of researchers from various disciplines due to their fascinating physico-chemical properties. This book describes the applications of carbon nanotubes in various areas including environmental science such as remediation and speciation, water research, medicine including sensors, targeted drug delivery and therapeutics. The application of carbon nanotubes in waste water research which includes organic, inorganic and microbial pollutants is also discussed as is its applications in material science and polymer science.
Download or read book Industrial Uses of Large Radiation Sources written by International Atomic Energy Agency and published by . This book was released on 1963 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nano Energetic Materials written by Shantanu Bhattacharya and published by Springer. This book was released on 2018-11-09 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research on the area of nano-energetic materials, their synthesis, fabrication, patterning, application and integration with various MEMS systems and platforms. Keeping in mind the applications for this field in aerospace and defense sectors, the articles in this volume contain contributions by leading researchers in the field, who discuss the current challenges and future perspectives. This volume will be of use to researchers working on various applications of high-energy research.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer. This book was released on 1976 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis· seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac· tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 20 (thesis year 1975) a total of 10,374 theses titles from 28 Canadian and 239 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 20 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.
Download or read book Dynamics and Control of Underactuated Multibody Spacecraft written by Sangbum Cho and published by . This book was released on 2002 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forest Fire Research written by Universidade de Coimbra and published by . This book was released on 2010 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Prediction of a Ducted Rocket Combustor microform written by Robert Alan Stowe and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 2001 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
