Download or read book Truth and Traceability in Physics and Metrology written by Michael Grabe and published by Morgan & Claypool Publishers. This book was released on 2018-10-05 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrological data is known to be blurred by the imperfections of the measuring process. In retrospect, for about two centuries regular or constant errors were no focal point of experimental activities, only irregular or random error were. Today's notation of unknown systematic errors is in line with this. Confusingly enough, the worldwide practiced approach to belatedly admit those unknown systematic errors amounts to consider them as being random, too. This book discusses a new error concept dispensing with the common practice to randomize unknown systematic errors. Instead, unknown systematic errors will be treated as what they physically are- namely as constants being unknown with respect to magnitude and sign. The ideas considered in this book issue a proceeding steadily localizing the true values of the measurands and consequently traceability.
Download or read book Metrology from Physics Fundamentals to Quality of Life written by P. Tavella and published by IOS Press. This book was released on 2018-01-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is a constantly evolving field, and one which has developed in many ways in the last four decades. This book presents the proceedings of the Enrico Fermi Summer School on the topic of Metrology, held in Varenna, Italy, from 26 June to 6 July 2017. This was the 6th Enrico Fermi summer school devoted to metrology, the first having been held in 1976. The 2017 program addressed two major new directions for metrology: the work done in preparation for a possible re-definition of four of the base units of the SI in 2018, and the impact of the application of metrology to issues addressing quality of life – such as global climate change and clinical and food analysis – on science, citizens and society. The lectures were grouped into three modules: metrology for quality of life; fundamentals of metrology; and physical metrology and fundamental constants, and topics covered included food supply and safety; biomarkers; monitoring climate and air quality; new IS units; measurement uncertainty; fundamental constants; electrical metrology; optical frequency standards; and photometry and light metrology. The book provides an overview of the topics and changes relevant to metrology today, and will be of interest to both academics and all those whose work involves any of the various aspects of this field.
Download or read book The Uncertainty of Measurements written by Shri Krishna Kimothi and published by Quality Press. This book was released on 2001-11-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The uncertainty of measurement results is drawing attention of managers, metrologists and customers. The accuracy of measurements affects all of us in trade, commerce, safety, health care environmental protection and more. The quality of these measurements are regulated by a variety of government agencies. Measurement also plays an important role in manufacturing and service organizations. Use this book to learn more about metrology and the need for reliable measurements. You can also learn about measurement system and quality of measurement systems, objectives and methods. Statistical techniques in metrology are also explained. Examples of measurement data and random variables, probability density functions, sampling distribution, statistical estimation degrees of freedom and regression are included. An entire chapter is devoted to measurement errors. The book goes in-depth into explaining national and international measurement systems and standards, and includes a complete chapter on calibration and measurement trace ability. Measurement Uncertainty will show how to evaluate various uncertainties in measurements using several approaches including international consensus. Calibration laboratories can look specifically at the chapter on that profession to guide them in their measurement improvements. Kimothi also looks at specific industries and their measurement capabilities and includes examples of R&R studies. A great resource for the CQE, CQT, CCT, CSSBB certification exams!
Download or read book Traceability in Chemical Measurement written by Paul De Bièvre and published by Springer Science & Business Media. This book was released on 2005-01-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrological traceability of chemical measurement results means the establishment of a relation to metrological stated references through an unbroken chain of comparisons. This volume collects 56 outstanding papers on the topic, mostly published in the period 2000-2003 in the journal "Accreditation and Quality Assurance". They provide the latest understanding, and possibly the rationalenbsp;why it is important to integrate the concept of metrological traceability including suitable measurement standards such as certified reference materials, into the standard measurement procedures of every analytical laboratory. In addition, this anthology considers the benefits to both the analytical laboratory and the user of the measurement results.
Download or read book Metrology in Chemistry written by Ewa Bulska and published by Springer. This book was released on 2018-09-29 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this concise book, the author presents the essentials every chemist needs to know about how to obtain reliable measurement results. Starting with the basics of metrology and the metrological infrastructure, all relevant topics – such as traceability, calibration, chemical reference materials, validation and uncertainty – are covered. In addition, key aspects of laboratory management, including quality management, inter-laboratory comparisons, proficiency testing, and accreditation, are addressed.
Download or read book The Quality of Measurements written by A.E. Fridman and published by Springer Science & Business Media. This book was released on 2011-11-23 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph and translation from the Russian describes in detail and comments on the fundamentals of metrology. The basic concepts of metrology, the principles of the International System of Units SI, the theory of measurement uncertainty, the new methodology of estimation of measurement accuracy on the basis of the uncertainty concept, as well as the methods for processing measurement results and estimating their uncertainty are discussed from the modern position. It is shown that the uncertainty concept is compatible with the classical theory of accuracy. The theory of random uncertainties is supplemented with their most general description on the basis of generalized normal distribution; the instrumental systematic errors are presented in connection with the methodology of normalization of the metrological characteristics of measuring instruments. The information about modern systems of traceability is given. All discussed theoretical principles and calculation methods are illustrated with examples.
Download or read book Metrology and Physical Constants written by A. Di Giuseppe and published by IOS Press. This book was released on 2013-10-21 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability and accuracy of systems of measurement continue to advance. We are about to enter a period of the most stable measurement system we can imagine with the anticipated new definitions of the SI units of measurement; a direct link between fundamental physics and metrology which will eliminate the current definition of the kilogram, until now based upon an artifact. This book presents selected papers from Course 185 of the Enrico Fermi International School of Physics, held in Varenna, Italy, in July 2012 and jointly organized with the Bureau International des Poids et Mesures (BIPM). The papers delivered at the school covered some of the most advanced topics in the discipline of metrology, including nano-technologies; quantum information and quantum devices; biology and medicine; food; surface quality; ionising radiation for health, environment, art and archaeology; and climate. The continuous and striking advances in basic research concerning atomic frequency standards operating both in the visible range and at microwave levels and the applications to satellite systems are also considered, in the framework of a historical review of the international organization of metrology, as are the problems inherent in uncertainty statements and definitions. This book will be of interest to all those whose work involves scientific measurement at the highest levels of accuracy.
Download or read book Repeatability and Accuracy written by Alan Hayward and published by . This book was released on 1977 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metrology and Fundamental Constants written by International School of Physics "Enrico Fermi" and published by IOS Press. This book was released on 2007-10-26 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume can be justified by the following three facts, the need to provide, from time to time, a co-ordinated set of lectures which present the relevant progress in Metrology, the increasing intertwining between Fundamental Physics and the practice of Metrological Measurements, and, third, the flurry of new and unexpected discoveries in this field, with a correlated series of Nobel Prizes bestowed to individuals working in Fundamental Constants research and novel experimental methods. One of the most fascinating and exciting characteristics of metrology is its intimate relationship between fundamental physics and the leading edge of technology which is needed to perform advanced and challenging experiments and measurements, as well as the determination of the values and interrelations between the Fundamental Constants. In some cases, such as the caesium fountains clocks or the optical frequency standards, the definition of the value of a quantity is, in the laboratory, in the region of 10-16 and experiments are under way to reach 10-18. Many of these results and the avenues leading to further advances are discussed in this volume, along a major step in metrology, expected in the near future, which could change the “old” definition of the kilogram, still based on a mechanical artefact, toward a new definition resting on a fixed value of a fundamental constant.
Download or read book Metrology and Theory of Measurement written by Anna G. Chunovkina and published by . This book was released on 2013 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Metrology is the science of measurements. It is traceable to measurement standards, thus to the concept of measurement accuracy, which is used in all natural and technical sciences, as well as in some fields of social sciences and liberal arts. The key problem is one of obtaining knowledge of the physical reality, which is observed through a prism of an assemblage of quantity properties describing the objectively-real world. One of the fundamental tasks of metrology is the development of theoretical and methodological aspects of the procedure of getting an accurate knowledge relating to objects and processes of the surrounding world. Due to the rapid development of information technologies and intelligent measurement systems and measuring instruments, as well as to the growing usage of mathematical methods in social and biological sciences, this monograph is dedicated to convey the fundamental theory."--Publisher's website.
Download or read book Meeting the Traceability Requirements of ISO17025 written by and published by . This book was released on 2003 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quality Assured Measurement written by Leslie Pendrill and published by Springer Nature. This book was released on 2019-10-24 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a general and comprehensive framework for the assurance of quality in measurements. Written by a foremost expert in the field, the text reflects an on-going international effort to extend traditional quality assured measurement, rooted in fundamental physics and the SI, to include non-physical areas such as person-centred care and the social sciences more generally. Chapter by chapter, the book follows the measurement quality assurance loop, based on Deming’s work. The author enhances this quality assurance cycle with insights from recent research, including work on the politics and philosophy of metrology, the new SI, quantitative and qualitative scales and entropy, decision risks and uncertainty when addressing human challenges, Man as a Measurement Instrument, and Psychometry and Person-centred care. Quality Assured Measurement: Unification across Social and Physical Sciences provides students and researchers in physics, chemistry, engineering, medicine and the social sciences with practical guidance on designing, implementing and applying a quality-assured measurement while engaging readers in the most novel and expansive areas of contemporary measurement research.
Download or read book Risk Error and Uncertainty Laboratory Quality Management in the Age of Metrology An Issue of the Clinics in Laboratory Medicine E Book written by James O. Westgard and published by Elsevier Health Sciences. This book was released on 2017-02-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Clinics in Laboratory Medicine entitled “Risk, Error and Uncertainty: Laboratory Quality Management in the Age of Metrology will be guest edited by Sten Westgard, James Westgard, and David Armbruster. The issue will cover a broad range of topics related to management in the laboratory including but not limited to: Metrology Perspectives; Biologic Variation Approach to Daily Laboratory; Clinical Outcome Approach to Goal Setting; Six Sigma Quality Management System; Traceability and Comparability; MU, Risk, and Sigma-metrics at Sunway; and Quality Indicators for the Total Testing Process, among others.
Download or read book Psychological and Social Measurement written by Mark Wilson and published by Springer. This book was released on 2017-12-22 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this tribute to Benjamin Wright, former students and colleagues recall the foundational contributions he made to the theory and practice of measurement in a career spanning over five decades. Wright is recognized as the foremost proponent of the psychometric approach of Georg Rasch, a Danish mathematician, whose ideas continue to provoke controversy. Wright’s colleagues and students, and students of their students, are leaders in educational research and practice around the world. This volume relates the extent of Wright’s influence far beyond education and psychology, where his work in measurement began, into health care and the social sciences at large. The editors and contributors—all leading measurement scholars—trace the development of themes in Wright’s work, identifying the roots of today’s formative assessment methods, the integration of quantitative and qualitative data, and the contrast between scientific and statistical methods. These previously unpublished papers reflect on Wright’s lifelong passion for making measurement both more scientific and more meaningful. They recount how Wright’s insight, energy, and gregarious nature led him to produce multiple innovations in computing, estimation methods, model development, fit assessment, and reliability theory, stimulating practical applications in dozens of fields, serving on over 120 dissertation committees, and founding several professional societies. The volume includes three reprinted articles by Wright that provide insights into his early engagement with Rasch’s ideas. Psychological and Social Measurement will be welcomed by the broad international measurement community of professionals and researchers working in such diverse fields as education, psychology, health sciences, management, and metrology. Scientists working in any field involving measurement science and technology will appreciate an inside look at this seminal figure and a new perspective on the expanding conversation across the sciences about measurement and the communication of meaningful, transparent information.
Download or read book Pacific Rim Objective Measurement Symposium PROMS 2016 Conference Proceedings written by Quan Zhang and published by Springer. This book was released on 2018-04-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers original studies presented at the PROMS 2016 conference on Rasch theories and Rasch-based applications. It provides significant examples used to address practical measurement problems across a range of disciplines, including: Classic Testing Theory (CTT), Item Response Theory (IRT), philosophy of measurement, dimensionality, the role of fit statistics and research, business and industrial applications, health-related research and the latest Rasch-based computer software. PROMS welcomes empirical and theoretical studies and workshops, preferably with an emphasis on the Rasch model. Special attention is paid to manuscripts submitted by non-native English-speaking authors from Pacific Rim countries, regions and beyond. PROMS 2016 (Pacific Rim Objective Measurement Symposium) was held July 30-August 3, 2016 in Xi’an, China. The goal of the conference was to bring together researchers, scholars and professors from research institutes, universities, hospitals, business and management sectors, as well as professional practitioners, to exchange and share ideas, problems and solutions regarding the multifaceted aspects of the Rasch model and on the much debated yet highly topical issues of objective assessment.
Download or read book Engineering Metrology and Measurements written by Raghavendra, and published by OUP India. This book was released on 2013-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Metrology and Measurements is a textbook designed for students of mechanical, production and allied disciplines to facilitate learning of various shop-floor measurement techniques and also understand the basics of mechanical measurements.
Download or read book An Introduction to Uncertainty in Measurement written by L. Kirkup and published by Cambridge University Press. This book was released on 2006-06-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement shapes scientific theories, characterises improvements in manufacturing processes and promotes efficient commerce. In concert with measurement is uncertainty, and students in science and engineering need to identify and quantify uncertainties in the measurements they make. This book introduces measurement and uncertainty to second and third year students of science and engineering. Its approach relies on the internationally recognised and recommended guidelines for calculating and expressing uncertainty (known by the acronym GUM). The statistics underpinning the methods are considered and worked examples and exercises are spread throughout the text. Detailed case studies based on typical undergraduate experiments are included to reinforce the principles described in the book. This guide is also useful to professionals in industry who are expected to know the contemporary methods in this increasingly important area. Additional online resources are available to support the book at www.cambridge.org/9780521605793.
