Download or read book Trusted Digital Circuits written by Hassan Salmani and published by Springer. This book was released on 2018-04-19 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the integrated circuit supply chain flow and discusses security issues across the flow, which can undermine the trustworthiness of final design. The author discusses and analyzes the complexity of the flow, along with vulnerabilities of digital circuits to malicious modifications (i.e. hardware Trojans) at the register-transfer level, gate level and layout level. Various metrics are discussed to quantify circuit vulnerabilities to hardware Trojans at different levels. Readers are introduced to design techniques for preventing hardware Trojan insertion and to facilitate hardware Trojan detection. Trusted testing is also discussed, enabling design trustworthiness at different steps of the integrated circuit design flow. Coverage also includes hardware Trojans in mixed-signal circuits.
Download or read book Digital Circuits written by Ronald C. Emery and published by CRC Press. This book was released on 2020-11-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended to introduce the student of electronics to the fundamentals of digital circuits, both combinational and sequential, in a reasonable and systematic manner. It proceeds from basic logic concepts to circuits and designs.
Download or read book Digital Integrated Circuit Design Using Verilog and Systemverilog written by Ronald W. Mehler and published by Elsevier. This book was released on 2014-09-30 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: For those with a basic understanding of digital design, this book teaches the essential skills to design digital integrated circuits using Verilog and the relevant extensions of SystemVerilog. In addition to covering the syntax of Verilog and SystemVerilog, the author provides an appreciation of design challenges and solutions for producing working circuits. The book covers not only the syntax and limitations of HDL coding, but deals extensively with design problems such as partitioning and synchronization, helping you to produce designs that are not only logically correct, but will actually work when turned into physical circuits. Throughout the book, many small examples are used to validate concepts and demonstrate how to apply design skills. This book takes readers who have already learned the fundamentals of digital design to the point where they can produce working circuits using modern design methodologies. It clearly explains what is useful for circuit design and what parts of the languages are only software, providing a non-theoretical, practical guide to robust, reliable and optimized hardware design and development. - Produce working hardware: Covers not only syntax, but also provides design know-how, addressing problems such as synchronization and partitioning to produce working solutions - Usable examples: Numerous small examples throughout the book demonstrate concepts in an easy-to-grasp manner - Essential knowledge: Covers the vital design topics of synchronization, essential for producing working silicon; asynchronous interfacing techniques; and design techniques for circuit optimization, including partitioning
Download or read book Testing and Reliable Design of CMOS Circuits written by Niraj K. Jha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years CMOS technology has become increas ingly dominant for realizing Very Large Scale Integrated (VLSI) circuits. The popularity of this technology is due to its high den sity and low power requirement. The ability to realize very com plex circuits on a single chip has brought about a revolution in the world of electronics and computers. However, the rapid advance ments in this area pose many new problems in the area of testing. Testing has become a very time-consuming process. In order to ease the burden of testing, many schemes for designing the circuit for improved testability have been presented. These design for testability techniques have begun to catch the attention of chip manufacturers. The trend is towards placing increased emphasis on these techniques. Another byproduct of the increase in the complexity of chips is their higher susceptibility to faults. In order to take care of this problem, we need to build fault-tolerant systems. The area of fault-tolerant computing has steadily gained in importance. Today many universities offer courses in the areas of digital system testing and fault-tolerant computing. Due to the impor tance of CMOS technology, a significant portion of these courses may be devoted to CMOS testing. This book has been written as a reference text for such courses offered at the senior or graduate level. Familiarity with logic design and switching theory is assumed. The book should also prove to be useful to professionals working in the semiconductor industry.
Download or read book Digital Electronics 2 written by Tertulien Ndjountche and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: As electronic devices become increasingly prevalent in everyday life, digital circuits are becoming even more complex and smaller in size. This book presents the basic principles of digital electronics in an accessible manner, allowing the reader to grasp the principles of combinational and sequential logic and the underlying techniques for the analysis and design of digital circuits. Providing a hands-on approach, this work introduces techniques and methods for establishing logic equations and designing and analyzing digital circuits. Each chapter is supplemented with practical examples and well-designed exercises with worked solutions. This second of three volumes focuses on sequential and arithmetic logic circuits. It covers various aspects related to the following topics: latch and flip-flop; binary counters; shift registers; arithmetic and logic circuits; digital integrated circuit technology; semiconductor memory; programmable logic circuits. Along with the two accompanying volumes, this book is an indispensable tool for students at a bachelors or masters level seeking to improve their understanding of digital electronics, and is detailed enough to serve as a reference for electronic, automation and computer engineers.
Download or read book Reliable Computer Systems written by Daniel Siewiorek and published by Digital Press. This book was released on 2014-06-28 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhance your hardware/software reliability Enhancement of system reliability has been a major concern of computer users and designers ¦ and this major revision of the 1982 classic meets users' continuing need for practical information on this pressing topic. Included are case studies of reliable systems from manufacturers such as Tandem, Stratus, IBM, and Digital, as well as coverage of special systems such as the Galileo Orbiter fault protection system and AT&T telephone switching processors.
Download or read book Hardware IP Security and Trust written by Prabhat Mishra and published by Springer. This book was released on 2017-01-02 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of current Intellectual Property (IP) based System-on-Chip (SoC) design methodology and highlights how security of IP can be compromised at various stages in the overall SoC design-fabrication-deployment cycle. Readers will gain a comprehensive understanding of the security vulnerabilities of different types of IPs. This book would enable readers to overcome these vulnerabilities through an efficient combination of proactive countermeasures and design-for-security solutions, as well as a wide variety of IP security and trust assessment and validation techniques. This book serves as a single-source of reference for system designers and practitioners for designing secure, reliable and trustworthy SoCs.
Download or read book Reliable Computer Systems written by Daniel P. Siewiorek and published by CRC Press. This book was released on 1998-12-15 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic reference work is a comprehensive guide to the design, evaluation, and use of reliable computer systems. It includes case studies of reliable systems from manufacturers, such as Tandem, Stratus, IBM, and Digital. It covers special systems such as the Galileo Orbiter fault protection system and AT&T telephone switching system processors
Download or read book Digital Electronics written by Dr. P. Kannan and published by Sree kamalamani Publications . This book was released on 2018-10-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is extensively designed for the third semester ECE students as per Anna university syllabus R-2013. The following chapters constitute the following units Chapter 1, 2 and :-Unit 1Chapter 3 covers :-Unit 2 Chapter 4 and 5 covers:-Unit 3Chapter 6 covers :- Unit 4Chapter 7 covers :- Unit 5Chapter 8 covers :- Unit 5 CHAPTER 1: Introduces the Number System, binary arithmetic and codes. CHAPTER 2: Deals with Boolean algebra, simplification using Boolean theorems, K-map method , Quine McCluskey method, logic gates, implementation of switching function using basic Logical Gates and Universal Gates. CHAPTER 3: Describes the combinational circuits like Adder, Subtractor, Multiplier, Divider, magnitude comparator, encoder, decoder, code converters, Multiplexer and Demultiplexer. CHAPTER 4: Describes with Latches, Flip-Flops, Registers and Counters CHAPTER 5: Concentrates on the Analysis as well as design of synchronous sequential circuits, Design of synchronous counters, sequence generator and Sequence detector CHAPTER 6: Concentrates the Design as well as Analysis of Fundamental Mode circuits, Pulse mode Circuits, Hazard Free Circuits, ASM Chart and Design of Asynchronous counters. CHAPTER 7: Discussion on memory devices which includes ROM, RAM, PLA, PAL, Sequential logic devices and ASIC. CHAPTER 8: Concentrate on the comparison, operation and characteristics of RTL, DTL, TTL, ECL and MOS families. We have taken enough care to present the definitions and statements of basic laws and theorems, problems with simple steps to make the students familiar with the fundamentals of Digital Design.
Download or read book Secure System Design and Trustable Computing written by Chip-Hong Chang and published by Springer. This book was released on 2015-09-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the foundations for understanding hardware security and trust, which have become major concerns for national security over the past decade. Coverage includes issues related to security and trust in a variety of electronic devices and systems related to the security of hardware, firmware and software, spanning system applications, online transactions and networking services. This serves as an invaluable reference to the state-of-the-art research that is of critical significance to the security of and trust in, modern society’s microelectronic-supported infrastructures.
Download or read book On Chip Current Sensors for Reliable Secure and Low Power Integrated Circuits written by Rodrigo Possamai Bastos and published by Springer Nature. This book was released on 2019-09-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with insight into an alternative approach for enhancing the reliability, security, and low power features of integrated circuit designs, related to transient faults, hardware Trojans, and power consumption. The authors explain how the addition of integrated sensors enables the detection of ionizing particles and how this information can be processed at a high layer. The discussion also includes a variety of applications, such as the detection of hardware Trojans and fault attacks, and how sensors can operate to provide different body bias levels and reduce power costs. Readers can benefit from these sensors-based approaches through designs with fast response time, non-intrusive integration on gate-level and reasonable design costs.
Download or read book Energy Efficient and Reliable Embedded Nanoscale SRAM Design written by Bhupendra Singh Reniwal and published by CRC Press. This book was released on 2023-11-29 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference text covers a wide spectrum for designing robust embedded memory and peripheral circuitry. It will serve as a useful text for senior undergraduate and graduate students and professionals in areas including electronics and communications engineering, electrical engineering, mechanical engineering, and aerospace engineering. Discusses low-power design methodologies for static random-access memory (SRAM) Covers radiation-hardened SRAM design for aerospace applications Focuses on various reliability issues that are faced by submicron technologies Exhibits more stable memory topologies Nanoscale technologies unveiled significant challenges to the design of energy- efficient and reliable SRAMs. This reference text investigates the impact of process variation, leakage, aging, soft errors and related reliability issues in embedded memory and periphery circuitry. The text adopts a unique way to explain the SRAM bitcell, array design, and analysis of its design parameters to meet the sub-nano-regime challenges for complementary metal-oxide semiconductor devices. It comprehensively covers low- power-design methodologies for SRAM, exhibits more stable memory topologies, and radiation-hardened SRAM design for aerospace applications. Every chapter includes a glossary, highlights, a question bank, and problems. The text will serve as a useful text for senior undergraduate students, graduate students, and professionals in areas including electronics and communications engineering, electrical engineering, mechanical engineering, and aerospace engineering. Discussing comprehensive studies of variability-induced failure mechanism in sense amplifiers and power, delay, and read yield trade-offs, this reference text will serve as a useful text for senior undergraduate, graduate students, and professionals in areas including electronics and communications engineering, electrical engineering, mechanical engineering, and aerospace engineering. It covers the development of robust SRAMs, well suited for low-power multi-core processors for wireless sensors node, battery-operated portable devices, personal health care assistants, and smart Internet of Things applications.
Download or read book Recent Advances in Security Privacy and Trust for Internet of Things IoT and Cyber Physical Systems CPS written by Kuan-Ching Li and published by CRC Press. This book was released on 2020-12-17 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Security, privacy, and trust in the Internet of Things (IoT) and CPS (Cyber-Physical Systems) are different from conventional security as concerns revolve around the collection and aggregation of data or transmission of data over the network. Analysis of cyber-attack vectors and the provision of appropriate mitigation techniques are essential research areas for these systems. Adoption of best practices and maintaining a balance between ease of use and security are, again, crucial for the effective performance of these systems. Recent Advances in Security, Privacy and Trust for Internet of Things (IoT) and Cyber-Physical Systems (CPS) discusses and presents techniques and methodologies, as well as a wide range of examples and illustrations, to effectively show the principles, algorithms, challenges, and applications of security, privacy, and trust for IoT and CPS. Book features: Introduces new directions for research, development, and engineering security, privacy, and trust of IoT and CPS Includes a wealth of examples and illustrations to effectively demonstrate the principles, algorithms, challenges, and applications Covers most of the important security aspects and current trends not present in other reference books This book will also serve as an excellent reference in security, privacy, and trust of IoT and CPS for professionals in this fast-evolving and critical field. The chapters present high-quality contributions from researchers, academics, and practitioners from various national and international organizations and universities.
Download or read book An Introduction to Logic Circuit Testing written by Parag K. Lala and published by Springer Nature. This book was released on 2022-06-01 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Logic Circuit Testing provides a detailed coverage of techniques for test generation and testable design of digital electronic circuits/systems. The material covered in the book should be sufficient for a course, or part of a course, in digital circuit testing for senior-level undergraduate and first-year graduate students in Electrical Engineering and Computer Science. The book will also be a valuable resource for engineers working in the industry. This book has four chapters. Chapter 1 deals with various types of faults that may occur in very large scale integration (VLSI)-based digital circuits. Chapter 2 introduces the major concepts of all test generation techniques such as redundancy, fault coverage, sensitization, and backtracking. Chapter 3 introduces the key concepts of testability, followed by some ad hoc design-for-testability rules that can be used to enhance testability of combinational circuits. Chapter 4 deals with test generation and response evaluation techniques used in BIST (built-in self-test) schemes for VLSI chips. Table of Contents: Introduction / Fault Detection in Logic Circuits / Design for Testability / Built-in Self-Test / References
Download or read book Reliable and Energy Efficient Streaming Multiprocessor Systems written by Anup Kumar Das and published by Springer. This book was released on 2018-01-03 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses analysis, design and optimization techniques for streaming multiprocessor systems, while satisfying a given area, performance, and energy budget. The authors describe design flows for both application-specific and general purpose streaming systems. Coverage also includes the use of machine learning for thermal optimization at run-time, when an application is being executed. The design flow described in this book extends to thermal and energy optimization with multiple applications running sequentially and concurrently.
Download or read book Digital Electronics written by Anil K. Maini and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamentals and implementation of digital electronics are essential to understanding the design and working of consumer/industrial electronics, communications, embedded systems, computers, security and military equipment. Devices used in applications such as these are constantly decreasing in size and employing more complex technology. It is therefore essential for engineers and students to understand the fundamentals, implementation and application principles of digital electronics, devices and integrated circuits. This is so that they can use the most appropriate and effective technique to suit their technical need. This book provides practical and comprehensive coverage of digital electronics, bringing together information on fundamental theory, operational aspects and potential applications. With worked problems, examples, and review questions for each chapter, Digital Electronics includes: information on number systems, binary codes, digital arithmetic, logic gates and families, and Boolean algebra; an in-depth look at multiplexers, de-multiplexers, devices for arithmetic operations, flip-flops and related devices, counters and registers, and data conversion circuits; up-to-date coverage of recent application fields, such as programmable logic devices, microprocessors, microcontrollers, digital troubleshooting and digital instrumentation. A comprehensive, must-read book on digital electronics for senior undergraduate and graduate students of electrical, electronics and computer engineering, and a valuable reference book for professionals and researchers.
Download or read book Diagnosis Reliable Design of Digital Systems written by Melvin A. Breuer and published by Springer. This book was released on 2014-04-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1960's there has developed a great interest, both in industry and academia, in the subjects of maintenance and reliability of digital systems. The increased complexity of current systems makes this interest well justified. Costs associated with the necessity to maintain such systems represent a substantial and growing percentage of total system costs. In this book we consider many of the problems associated with diagnosing failures in digital systems, locating the source of such failures, and the related problem of design of ultra reliable systems - systems which do not fail despite the presence of physical defects (fault tolerance), systems which diagnose their own failures (self checking), and systems which are easily tested. Although many of the problems considered are in theory intractable, in practice most have solution procedures which are practical and effective. The book emphasizes these procedures and when available presents several procedures for each problem. With the increased interest in this subject area courses have been devel oped at many universities. This book is intended as a text for such courses and can also be used for self study by the practicing engineer familiar with digital circuits and systems. The first chapter is an introduction to the subject matter and notation of the book. The next two chapters consider in detail the problems associated with efficient detection and location of fail ures in combinational and sequential circuits respectively.
