Download or read book Tritium Fuel of Fusion Reactors written by Tetsuo Tanabe and published by Springer. This book was released on 2016-12-05 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on tritium as a fuel for fusion reactors and a next-generation energy source. Following an introduction of tritium as a hydrogen radioisotope, important issues involved in establishing safe and economical tritium fuel cycles including breeding for a fusion reactor are summarized; these include the handling of large amounts of tritium: confinement, leakage, contamination, permeation, regulation and tritium accountancy, and impacts on surrounding areas. Targeting and encouraging the students and technicians who will design and operate fusion reactors in the near future, this book offers a valuable resource on tritium science and technology.

Download or read book Tritium Fuel of Fusion Reactors written by Tetsuo Tanabe and published by Springer. This book was released on 2016-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on tritium as a fuel for fusion reactors and a next-generation energy source. Following an introduction of tritium as a hydrogen radioisotope, important issues involved in establishing safe and economical tritium fuel cycles including breeding for a fusion reactor are summarized; these include the handling of large amounts of tritium: confinement, leakage, contamination, permeation, regulation and tritium accountancy, and impacts on surrounding areas. Targeting and encouraging the students and technicians who will design and operate fusion reactors in the near future, this book offers a valuable resource on tritium science and technology.

Download or read book Tritium Technologies for Thermonuclear Fusion Reactors written by Alexander Perevezentsev and published by Academic Press. This book was released on 2021-06-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tritium Technologies for Thermonuclear Fusion Reactors summarizes the most recent research and practice in tritium technologies for the processing of hydrogen isotopes in fuel cycles. Authors Dr. Perevezentsev and Professor Rozenkevich combine their wealth of first-hand experience to present this comprehensive guide which promotes the best radiation protection practices and a more sustainable way to produce power in a thermonuclear reactor plant. Applicable to both magnetic and inertial confinements of plasma, this book covers tritium processing systems, tritium recovery from the plasma chamber, and various safety systems devoted to lessening the impact on the public and environment. The readers are also led through various modeling techniques, such as the separation of hydrogen isotopes, and the detritiation of liquid and gaseous streams in dynamic and steady state operation modes. This book is a practical guide which includes various case studies and examples which will help solidify the reader’s learning. It combines the latest research of tritium technologies with applications for fusion nuclear reactors, and includes solutions and directions for the resolution of various common challenges faced. Engineers, researchers, and students of tritium technologies, fusion energy, and nuclear power generation will gain a detailed and integrated understanding of how tritium can be used within a nuclear setting, for cleaner and more efficient power generation. Guides the reader through problem solving via step-by-step processes and models Includes case studies and examples throughout, from two of the most recognized experts in the field with firsthand knowledge of the subject Presents a comprehensive, practical reference on the tritium fuel cycle for fusion reactors

Download or read book Assessment of Inertial Confinement Fusion Targets written by National Research Council and published by National Academies Press. This book was released on 2013-07-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.

Download or read book Principles Of Fusion Energy An Introduction To Fusion Energy For Students Of Science And Engineering written by Archie A Harms and published by World Scientific Publishing Company. This book was released on 2000-06-15 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook accommodates the two divergent developmental paths which have become solidly established in the field of fusion energy: the process of sequential tokamak development toward a prototype and the need for a more fundamental and integrative research approach before costly design choices are made.Emphasis is placed on the development of physically coherent and mathematically clear characterizations of the scientific and technological foundations of fusion energy which are specifically suitable for a first course on the subject. Of interest, therefore, are selected aspects of nuclear physics, electromagnetics, plasma physics, reaction dynamics, materials science, and engineering systems, all brought together to form an integrated perspective on nuclear fusion and its practical utilization.The book identifies several distinct themes. The first is concerned with preliminary and introductory topics which relate to the basic and relevant physical processes associated with nuclear fusion. Then, the authors undertake an analysis of magnetically confined, inertially confined, and low-temperature fusion energy concepts. Subsequently, they introduce the important blanket domains surrounding the fusion core and discuss synergetic fusion-fission systems. Finally, they consider selected conceptual and technological subjects germane to the continuing development of fusion energy systems.

Download or read book Radiation Effects and Tritium Technology for Fusion Reactors written by and published by . This book was released on 1976 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tritium and Advanced Fuels in Fusion Reactors written by G. Bonizzoni and published by . This book was released on 1990 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Predictive Methods and Analysis of Time Dependent Tritium Flow Rates and Inventories in Fusion Systems written by marco riva and published by . This book was released on 2020 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: In nuclear fusion reactors, tritium dynamics plays a dominant role. An unprecedented amount of tritium is consumed in Deuterium-Tritium (D-T) nuclear fusion reactors, ~0.5 kg per day for 3 GW fusion power. However, tritium is radioactive, has short half-life (~12.33 years), and is present in nature in negligible concentration. Because of tritium scarcity, future fusion power reactors must be self-sufficient, i.e. the reactor must have a closed fuel cycle where tritium is produced in greater amounts than it is consumed. Furthermore, nuclear fusion reactors must accumulate and provide tritium start-up inventory for the next generation of fusion power plants, since natural reserves of tritium are very limited. Moreover, because of its radioactive nature, tritium presents a serious hazard to the personnel and has implications to safety and nuclear licensing. Accurate predictive models of the nuclear fusion fuel cycle are required to effectively design the fuel cycle components, understand tritium dynamics in the fusion fuel cycle, and determine the technology and physics requirements to attain tritium self-sufficiency. Moreover, accurate predictions of tritium inventories and flow rates within fusion components, and estimations of tritium releases to the environment are necessary for nuclear licensing. In this dissertation, two numerical models are developed to perform tritium transport assessment within fusion systems. First, a high fidelity numerical model is developed to simulate time-dependent tritium transport within the reactor outer fuel cycle (OFC). Detailed (high resolution) component-level models, where constitutive transport equations are implemented in COMSOL Multiphysics and solved for various fusion sub-systems, are integrated into system-level with the use of MATLAB/Simulink S-Functions to reproduce typical OFC tritium streams. The model is applied to the KOrean Helium Cooled Ceramic Reflector Test Blanket System (KO-HCCR TBS) which will be tested in the International Thermonuclear Experimental Reactor (ITER). However, the developed model offers some flexibility and can be applied to other Test Blanket Module (TBM) designs. Second, the overall fusion fuel cycle is modeled analytically by a system of time-dependent zero-dimensional ordinary differential equations with the tritium mean residence time method. This technique yields results useful for understanding the overall fuel cycle dynamics and the importance of certain components and parameters. The analysis of tritium inventories and flow rates is extended to determine the physics and technology requirements to attain tritium self-sufficiency. In particular, the state-of-the-art plasma physics and technology parameters (e.g. tritium burn fraction, fueling efficiency, processing times, etc.) and up-to-date fuel cycle design are considered in the analysis. The tritium self-sufficiency assessment and tritium start-up inventory evaluation are performed to investigate: (i) the effect of the reactor operating scenario and availability factor, e.g. to account for random failures and ordinary maintenance, (ii) the scenarios for commercialization, e.g. risk associated with tritium reserve inventory reduction, (iii) the penetration of fusion energy into power market, e.g. effect of the doubling time, and (iv) the effect of reactor power on tritium start-up inventory, e.g. for plasma-based test facilities, DEMOnstration reactors (DEMO), and power reactors. The results highlight the physics and technology R&D requirements to attain fuel self-sufficiency in fusion reactors.

Download or read book Sun in a Bottle Pie in the Sky written by L. J. Reinders and published by Springer Nature. This book was released on 2021-07-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an accessible overview of the 70-year history of nuclear fusion research and the vain attempts to construct an energy-generating nuclear fusion reactor. It shows that even in the most optimistic scenario nuclear fusion, despite the claims of its proponents and the billions being spent on research, will not be able to make a sizable contribution to the energy mix in this century. The important consequence is that nuclear fusion will not be a factor in combating climate change, since the race for carbon-free energy will have been won or lost long before the first nuclear fusion power station comes on line.

Download or read book Fusion Technology 1996 written by C. Varandas and published by Elsevier. This book was released on 2012-12-02 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of these proceedings was to provide a platform for the exchange of information on the design, construction and operation of fusion experiments. The technology which is being developed for the next step devices and fusion reactors was also covered.

Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

Download or read book Nuclear Fusion written by Igor Girka and published by BoD – Books on Demand. This book was released on 2019-04-17 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power production and its consumption and distribution are among the most urgent problems of mankind. Despite positive dynamics in introducing renewable sources of energy, nuclear power plants still remain the major source of carbon-free electric energy. Fusion can be an alternative to fission in the foreseeable future. Research in the field of controlled nuclear fusion has been ongoing for almost 100 years. Magnetic confinement systems are the most promising for effective implementation, and the International Thermonuclear Experimental Reactor is under construction in France. To accomplish nuclear fusion on Earth, we have to resolve a number of scientific and technological problems. This monograph includes selected chapters on nuclear physics and mechanical engineering within the scope of nuclear fusion.

Download or read book Plasma Physics and Fusion Energy written by Jeffrey P. Freidberg and published by Cambridge University Press. This book was released on 2008-07-10 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increase in interest worldwide in fusion research over the last decade and a half due to the recognition that a large number of new, environmentally attractive, sustainable energy sources will be needed to meet ever increasing demand for electrical energy. Based on a series of course notes from graduate courses in plasma physics and fusion energy at MIT, the text begins with an overview of world energy needs, current methods of energy generation, and the potential role that fusion may play in the future. It covers energy issues such as the production of fusion power, power balance, the design of a simple fusion reactor and the basic plasma physics issues faced by the developers of fusion power. This book is suitable for graduate students and researchers working in applied physics and nuclear engineering. A large number of problems accumulated over two decades of teaching are included to aid understanding.

Download or read book Plasma Material Interactions in a Controlled Fusion Reactor written by Tetsuo Tanabe and published by Springer Nature. This book was released on 2021-03-08 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a primer on the interplay between plasma and materials in a fusion reactor, so-called plasma–materials interactions (PMIs), highlighting materials and their influence on plasma through PMI. It aims to demonstrate that a plasma-facing surface (PFS) responds actively to fusion plasma and that the clarifying nature of PFS is indispensable to understanding the influence of PFS on plasma. It describes the modern insight into PMI, namely, relevant feedback to plasma performance from plasma-facing material (PFM) on changes in a material surface by plasma power load by radiation and particles, contrary to a conventional view that unilateral influence from plasma on PFM is dominant in PMI. There are many books and reviews on PMI in the context of plasma physics, that is, how plasma or plasma confinement works in PMI. By contrast, this book features a materials aspect in PMI focusing on changes caused by heat and particle load from plasma: how PFMs are changed by plasma exposure and then, accordingly, how the changed PFM interacts with plasma.

Download or read book Tritium Transport Analysis in HCPB DEMO Blanket with the FUS TPC Code KIT Scientific Reports 7642 written by Fabrizio Franza and published by KIT Scientific Publishing. This book was released on 2013 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Future Of Fusion Energy written by Jason Parisi and published by World Scientific. This book was released on 2019-01-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The text provides an interesting history of previous and anticipated accomplishments, ending with a chapter on the relationship of fusion power to nuclear weaponry. They conclude on an optimistic note, well worth being understood by the general public.'CHOICEThe gap between the state of fusion energy research and public understanding is vast. In an entertaining and engaging narrative, this popular science book gives readers the basic tools to understand how fusion works, its potential, and contemporary research problems.Written by two young researchers in the field, The Future of Fusion Energy explains how physical laws and the Earth's energy resources motivate the current fusion program — a program that is approaching a critical point. The world's largest science project and biggest ever fusion reactor, ITER, is nearing completion. Its success could trigger a worldwide race to build a power plant, but failure could delay fusion by decades. To these ends, this book details how ITER's results could be used to design an economically competitive power plant as well as some of the many alternative fusion concepts.

Download or read book Star Power written by Alain Bécoulet and published by MIT Press. This book was released on 2023-09-19 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and accessible explanation of the science and technology behind the domestication of nuclear fusion energy. Nuclear fusion research tells us that the Sun uses one gram of hydrogen to make as much energy as can be obtained by burning eight tons of petroleum. If nuclear fusion—the process that makes the stars shine—could be domesticated for commercial energy production, the world would gain an inexhaustible source of energy that neither depletes natural resources nor produces greenhouse gases. In Star Power, Alan Bécoulet offers a concise and accessible primer on fusion energy, explaining the science and technology of nuclear fusion and describing the massive international scientific effort to achieve commercially viable fusion energy. Bécoulet draws on his work as Head of Engineering at ITER (International Thermonuclear Experimental Reactor) to explain how scientists are trying to “put the sun in a box.” He surveys the history of nuclear power, beginning with post–World War II efforts to use atoms for peaceful purposes and describes how energy is derived from fusion, explaining that the essential principle of fusion is based on the capacity of nucleons (protons and neutrons) to assemble and form structures (atomic nuclei) in spite of electrical repulsion between protons, which all have a positive charge. He traces the evolution of fusion research and development, mapping the generation of electric current though fusion. The ITER project marks a giant step in the development of fusion energy, with the potential to demonstrate the feasibility of a nuclear fusion reactor. Star Power offers an introduction to what may be the future of energy production.