Download or read book Tribological Studies of Micro nanoscale Thin Solid Films written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Nanoscale Phenomena in Tribology written by Yip-Wah Chung and published by CRC Press. This book was released on 2011-10-19 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from presentations at a recent National Science Foundation Summer Institute on Nanomechanics, Nanomaterials, and Micro/Nanomanufacturing, Micro- and Nanoscale Phenomena in Tribology explores the convergence of the multiple science and engineering disciplines involved in tribology and the connection from the macro to nano world. Written by specialists from computation, materials science, mechanical engineering, surface physics, and chemistry, each chapter provides up-to-date coverage of both basic and advanced topics and includes extensive references for further study. After discussing the evolution of tribology in the micro and nano world, the book describes contact conditions spanning between macroscale and nanoscale contacts. It presents an overview of fundamental continuum treatments of interfacial contact and lubrication under a wide range of conditions, including novel advances in contact simulation. It also gives a thorough account of the nature of surface energies and forces in nanostructures as well as adhesion in dry and wet environments. The book then explains how to perform friction measurements at the nanoscale and interpret friction data before demonstrating how micro- and nanotextured surfaces affect adhesion, friction, and wetting. The final chapters emphasize the importance of surface chemistry and molecular dynamics simulation in tribology. With numerous examples and figures throughout, this volume presents a thorough account of important advancements in tribology that offer insight into micro- and nanoscale phenomena. By enabling a better understanding of fundamental micro- and nanoscale interactions, the book helps readers effectively design and fabricate durable tribological components for various engineering and biological systems.

Download or read book Thin Films in Tribology written by G. Dalmaz and published by Elsevier. This book was released on 1993-09-06 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tribological properties of relatively moving surfaces are greatly influenced by thin surface films which are of considerable importance in the design of machine components. From Victorian days when working lubricant films were calculated in tens of micrometres, to today when molecular dynamics simulations and even experiments are beginning to look at nanometre, single molecule thick films, the study of surfaces which is the tribologists' challenge has moved to finer and finer scales. The 66 papers in this volume provide reviews across the tribological field with thin films as their theme, giving a comprehensive and concise description on topics ranging from coatings and surface modification to bio-tribology. The articles provide the reader with an outline of their most effective application and potential uses in new technologies. The volume will be of interest not only to research workers and design engineers in the fields of new machine developments and lubrication, but also to engineers and students specialising in tribology.

Download or read book Handbook of Micro Nano Tribology written by Bharat Bushan and published by CRC Press. This book was released on 2020-10-28 with total page 1323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Handbook of Micro/Nanotribology addresses the rapid evolution within this field, serving as a reference for the novice and the expert alike. Two parts divide this handbook: Part I covers basic studies, and Part II addresses design, construction, and applications to magnetic storage devices and MEMS. Discussions include: surface physics and methods for physically and chemically characterizing solid surfaces roughness characterization and static contact models using fractal analysis sliding at the interface and friction on an atomic scale scratching and wear as a result of sliding nanofabrication/nanomachining as well as nano/picoindentation lubricants for minimizing friction and wear surface forces and microrheology of thin liquid films measurement of nanomechanical properties of surfaces and thin films atomic-scale simulations of interfacial phenomena micro/nanotribology and micro/nanomechanics of magnetic storage devices This comprehensive book contains 16 chapters contributed by more than 20 international researchers. In each chapter, the presentation starts with macroconcepts and then lead to microconcepts. With more than 500 illustrations and 50 tables, Handbook of Micro/Nanotribology covers the range of relevant topics, including characterization of solid surfaces, measurement techniques and applications, and theoretical modeling of interfaces. What's New in the Second Edition? New chapters on: AFM instrumentation Surface forces and adhesion Design and construction of magnetic storage devices Microdynamical devices and systems Mechanical properties of materials in microstructure Micro/nanotribology and micro/nanomechanics of MEMS devices

Download or read book Handbook of Micro Nano Tribology written by Bharat Bushan and published by CRC Press. This book was released on 2020-10-28 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Handbook of Micro/Nanotribology addresses the rapid evolution within this field, serving as a reference for the novice and the expert alike. Two parts divide this handbook: Part I covers basic studies, and Part II addresses design, construction, and applications to magnetic storage devices and MEMS. Discussions include: surface physics and methods for physically and chemically characterizing solid surfaces roughness characterization and static contact models using fractal analysis sliding at the interface and friction on an atomic scale scratching and wear as a result of sliding nanofabrication/nanomachining as well as nano/picoindentation lubricants for minimizing friction and wear surface forces and microrheology of thin liquid films measurement of nanomechanical properties of surfaces and thin films atomic-scale simulations of interfacial phenomena micro/nanotribology and micro/nanomechanics of magnetic storage devices This comprehensive book contains 16 chapters contributed by more than 20 international researchers. In each chapter, the presentation starts with macroconcepts and then lead to microconcepts. With more than 500 illustrations and 50 tables, Handbook of Micro/Nanotribology covers the range of relevant topics, including characterization of solid surfaces, measurement techniques and applications, and theoretical modeling of interfaces. What's New in the Second Edition? New chapters on: AFM instrumentation Surface forces and adhesion Design and construction of magnetic storage devices Microdynamical devices and systems Mechanical properties of materials in microstructure Micro/nanotribology and micro/nanomechanics of MEMS devices

Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.

Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics

Download or read book Nano tribology and Materials in MEMS written by Sujeet K. Sinha and published by Springer Science & Business Media. This book was released on 2013-08-27 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together recent developments in the areas of MEMS tribology, novel lubricants and coatings for nanotechnological applications, biomimetics in tribology and fundamentals of micro/nano-tribology. Tribology plays important roles in the functioning and durability of machines at small length scales because of the problems associated with strong surface adhesion, friction, wear etc. Recently, a number of studies have been conducted to understand tribological phenomena at nano/micro scales and many new tribological solutions for MEMS have been proposed.

Download or read book Fundamentals of Tribology and Bridging the Gap Between the Macro and Micro Nanoscales written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.

Download or read book Mechanical Properties of Nanomaterials written by Joshua Pelleg and published by Springer Nature. This book was released on 2021-06-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the mechanical properties of nanomaterials produced by several techniques for various applications. The dislocations observed in specimens obtained in nanomaterials are discussed on the chapter about deformation process. Partial dislocations and grain boundary sliding deformation phenomena in nanomaterial specimens are also deeply discussed. Tests for tension, compression, and hardness are described. The behavior of nanomaterials is compared to macrosize specimens, and the results obtained for different fabrication methods are also compared. The special characteristics of nanomaterials are summarized at the end of the book.

Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer. This book was released on 2017-04-05 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and comprehensive reference source and serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. This 4th edition has been completely revised and updated, concentrating on the key measurement techniques, their applications, and theoretical modeling of interfaces. It provides condensed knowledge of the field from the mechanics and materials science perspectives to graduate students, research workers, and practicing engineers.

Download or read book Fabrication and Tribological Properties of Hard Thin Films with Solid Lubricant Microreservoirs written by John H. Zimmerman and published by . This book was released on 2006 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational

Download or read book Tribology Issues and Opportunities in MEMS written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise.

Download or read book Handbook of Thin Film Technology written by Hartmut Frey and published by Springer Science & Business Media. This book was released on 2015-05-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Handbook of Thin Film Technology” covers all aspects of coatings preparation, characterization and applications. Different deposition techniques based on vacuum and plasma processes are presented. Methods of surface and thin film analysis including coating thickness, structural, optical, electrical, mechanical and magnetic properties of films are detailed described. The several applications of thin coatings and a special chapter focusing on nanoparticle-based films can be found in this handbook. A complete reference for students and professionals interested in the science and technology of thin films.

Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.

Download or read book Dynamic and Quasi static Contact and Scratch Analysis of Micro nanoscale Thin Solid Films with Application to Magnetic Storage Hard Disk Drives written by Raja Ramakanth Katta and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: With current demand for decreased size of micro/nanoscale systems, coupled with increased mobility, critical understanding of the ensuing contact or impact related behavior of thin solid films used in these systems is of paramount importance for improved design and reliability. In modern micro/nanodevice technologies significant emphasis has to be placed on the design of thin-films which can provide the required contact and scratch resistance. To aid this endeavor, scientific studies of the contact and scratch processes in these systems, both static and dynamic are needed to provide the tools necessary to help the advancement of these technologies. One such problem is the impact contact or quasi-static contact and scratch of the slider and disk in magnetic storage hard disk drives (HDD). Similar contact problems are encountered during the operation of other micromechanical systems like RF-MEMS switches where surface damage is observed after cyclic contact. One of the most critical elements of multilayer contact analysis is proper determination of the nanomechanical properties of each thin-film on the multilayer system. In the first part of this work the method of determining the mechanical properties using the Oliver and Pharr (O-P) nanoindentation technique is described. For nanometer sized thin-films where the O-P technique gives incorrect results, an improved method is used. Later a dimensional analysis-based method to obtain the mechanical properties from the nanoindentation data is implemented for magnetic storage films. A direct comparison of the properties obtained from conventional O-P nanoindentation technique to this new technique is presented. In the second part of this work, the effect of dynamic contact or impact on multilayer thin films specific to magnetic storage hard disk drives is presented. Since there are no impact models available for multilayer thin films in the literature, a new contact mechanics-based (CM) semi-analytical model of a rigid sphere (representing a slider corner) impacting an elastic-plastic (E-P) multilayer thin-film half-space was proposed for the first time to examine the potential damage to a magnetic storage head disk interface (HDI). A dynamic 3D finite element analysis (FEA) model was also developed to examine the impact damage in more detail and validate the impact model. To characterize the plastic deformation and frictional energy losses associated with the impact damage, a comprehensive oblique elastic impact coefficient of restitution (COR) model was proposed for elastic-plastic impacts for the first time and validated using FEA. A method to decouple the oblique impact parameters into normal impact COR and tangential impact COR was formulated. Since, in microsystems, the geometry of the impacting bodies is not limited to spherical bodies, a new contact mechanics-based (CM) model of a rigid cylinder with a finite length impacting an elastic-plastic homogeneous disk was also proposed and includes a novel method of estimating the residual depth after impact. Based on elastic unloading, an improved coefficient of restitution model was also proposed. This new impact model was applied to study a practical case of a cylindrical feature on the slider of a magnetic storage hard disk drive impacting the disk to predict various critical impact contact parameters. The CM model was validated using a plane strain FEA-based model and it was found that a cylindrical feature with longer length results in a substantial alleviation of impact damage. The final part of this work involved the investigation of the performance of thin-film multilayers while under the influence of much milder quasi-static contact scratch. A 2D plane strain FEA model of a rigid cylinder sliding over a multilayered thin-film half space was developed. The effects of different contact parameters such as applied normal load, friction coefficient and radius of curvature of the cylinder on the critical stresses in the multilayer system were analyzed. Later, for direct experimental comparison a full-blown 3D quasi-static FEA-based nanoscratch model of the multilayer thin-film system was also developed. The FEA scratch results were compared to nanoscratch experiments performed on actual magnetic disks. Consequently, the 3D FEA scratch model was used to quantitatively correlate the subsurface plastic deformation to the magnetic erasures typically found in HDDs due to scratch for the very first time.