Download or read book Treatment of Wood with Siloxanes and Metal Micro particle Deposition Using Plasma Technology written by Patricia Gascón-Garrido and published by . This book was released on 2017-10-06 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Treatment of wood with siloxanes and metal micro particle deposition using plasma technology written by Patricia Gascón-Garrido and published by Cuvillier Verlag. This book was released on 2017-10-06 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma treatment is a novel and promising technolgy in the field of wood surface modification. Deposition of micro-particles on wood surfaces by means of plasma is an interesting approach to enhance wood properties and thus, to extend the service life of wood products. On the other hand, several silicone fomulations have been already shown to cause excellent water repellence and interaction with cell wall components, beside to impart high chenical and weathering stability as well as biological resistance in treated wood. Based on that, this study focussed on both treatments seperately in an initial stage of the research; followed by the combination, in a two-step treatment, of vacuum-pressure impregnation of solid wook with siloxanes and additional copper deposition on wood surface using atmostpheric pressure plasma.
Download or read book Current Awareness in Particle Technology written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Modification Technologies written by Dick Sandberg and published by CRC Press. This book was released on 2021-07-15 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market for durable products using modified wood has increased substantially during the last few years. This is partly because of the restriction on the use of toxic preservatives due to environmental concerns, and to lower maintenance cost and time. Furthermore, as sustainability becomes a greater concern, the environmental impact of construction and interior materials is factored in planning by considering the whole life cycle and embodied energy of the materials used. Wood is modified to improve its intrinsic properties, enhance the range of applications of timber, and to acquire the form and functionality desired by engineers without calling the environmental friendliness into question. Wood modification processes are at various stages of development, and the challenges faced in scaling up to industrial applications differ. The aim of this book is to put together the key elements of the changes of wood constituents and the related changes in wood properties of modified wood. Further, a selection of the principal technologies implemented in wood modification are presented. This work is intended for researchers, professionals of timber construction, as well as students studying the science of materials, civil engineering and architecture. This work is not exhaustive, but intends to deliver an outline of the scientific disciplines necessary to apprehend the technologies of wood modification and its behavior during treatment, as well as during its use.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by and published by . This book was released on 1997 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Plasma Deposition Treatment and Etching of Polymers written by Riccardo d'Agostino and published by Elsevier. This book was released on 2012-12-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices. - Appeals to a broad range of industries from microelectronics to space technology - Discusses a wide array of new uses for plasma polymers - Provides a tutorial introduction to the field - Surveys various classes of plasma polymers, their chemical and morphological properties, effects of plasma process parameters on the growth and structure of these synthetic materials, and techniques for characterization - Interests scientists, engineers, and students alike
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1982 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science Technology written by and published by . This book was released on 1971 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Japanese Technical Periodical Index written by and published by . This book was released on 1987 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Wood Deterioration and Preservation written by Barry Goodell and published by ACS Symposium. This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years considerable progress has been made in elucidating wood decay mechanisms. This basic knowledge not only has the potential to develop alternative environmentally-benign wood preservatives, but may also impact other areas such as bioremediation and pulp and paper. This book will summarize the latest knowledge of the developments, potential impacts, and applications from some of the world's leading experts.
Download or read book New Technologies in Protective Coatings written by Carlos Giudice and published by BoD – Books on Demand. This book was released on 2017-09-06 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are at the center of all technological advances; it is evident in considering the spectacular progress that has been made in fields as diverse as engineering, medicine, biology, etc. Materials science and technology must develop researches allowing the generation of new methods of protection to reduce fundamentally the losses of human life as well as the economic ones. The former are impossible of quantifying, while the latter are highly significant; thus, only those derived from corrosive processes in their different forms reach, in technologically developed countries, about 4% of the Gross National Product (GNP), while those derived from fire action range from 0.5 to 1.0% of the mentioned GNP. The book, in the different chapters, displays original systems of superficial protection and of low environmental impact to minimize the losses by corrosion and the fire action.
Download or read book Thin Film Processes II written by Werner Kern and published by Elsevier. This book was released on 2012-12-02 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques. - Provides an all-new sequel to the 1978 classic, Thin Film Processes - Introduces new topics, and several key topics presented in the original volume are updated - Emphasizes practical applications of major thin film deposition and etching processes - Helps readers find the appropriate technology for a particular application
