Download or read book Medical Isotope Production Without Highly Enriched Uranium written by National Research Council and published by National Academies Press. This book was released on 2009-06-27 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the product of a congressionally mandated study to examine the feasibility of eliminating the use of highly enriched uranium (HEU2) in reactor fuel, reactor targets, and medical isotope production facilities. The book focuses primarily on the use of HEU for the production of the medical isotope molybdenum-99 (Mo-99), whose decay product, technetium-99m3 (Tc-99m), is used in the majority of medical diagnostic imaging procedures in the United States, and secondarily on the use of HEU for research and test reactor fuel. The supply of Mo-99 in the U.S. is likely to be unreliable until newer production sources come online. The reliability of the current supply system is an important medical isotope concern; this book concludes that achieving a cost difference of less than 10 percent in facilities that will need to convert from HEU- to LEU-based Mo-99 production is much less important than is reliability of supply.
Download or read book The Nuclear Fuel Cycle written by Nicholas Tsoulfanidis and published by . This book was released on 2013 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Separation Techniques for Nuclear Fuel Reprocessing and Radioactive Waste Treatment written by Kenneth L Nash and published by Elsevier. This book was released on 2011-03-15 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced separations technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of radioactive waste produced by the nuclear power industry. Nuclear fuel reprocessing techniques not only allow for recycling of useful fuel components for further power generation, but by also separating out the actinides, lanthanides and other fission products produced by the nuclear reaction, the residual radioactive waste can be minimised. Indeed, the future of the industry relies on the advancement of separation and transmutation technology to ensure environmental protection, criticality-safety and non-proliferation (i.e., security) of radioactive materials by reducing their long-term radiological hazard.Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment provides a comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment. Part one covers the fundamental chemistry, engineering and safety of radioactive materials separations processes in the nuclear fuel cycle, including coverage of advanced aqueous separations engineering, as well as on-line monitoring for process control and safeguards technology. Part two critically reviews the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment. The section includes discussions of advanced PUREX processes, the UREX+ concept, fission product separations, and combined systems for simultaneous radionuclide extraction. Part three details emerging and innovative treatment techniques, initially reviewing pyrochemical processes and engineering, highly selective compounds for solvent extraction, and developments in partitioning and transmutation processes that aim to close the nuclear fuel cycle. The book concludes with other advanced techniques such as solid phase extraction, supercritical fluid and ionic liquid extraction, and biological treatment processes.With its distinguished international team of contributors, Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment is a standard reference for all nuclear waste management and nuclear safety professionals, radiochemists, academics and researchers in this field. - A comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment - Details emerging and innovative treatment techniques, reviewing pyrochemical processes and engineering, as well as highly selective compounds for solvent extraction - Discusses the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment
Download or read book Molybdenum 99 for Medical Imaging written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-11-28 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The decay product of the medical isotope molybdenum-99 (Mo-99), technetium-99m (Tc-99m), and associated medical isotopes iodine-131 (I-131) and xenon-133 (Xe-133) are used worldwide for medical diagnostic imaging or therapy. The United States consumes about half of the world's supply of Mo-99, but there has been no domestic (i.e., U.S.-based) production of this isotope since the late 1980s. The United States imports Mo-99 for domestic use from Australia, Canada, Europe, and South Africa. Mo-99 and Tc-99m cannot be stockpiled for use because of their short half-lives. Consequently, they must be routinely produced and delivered to medical imaging centers. Almost all Mo-99 for medical use is produced by irradiating highly enriched uranium (HEU) targets in research reactors, several of which are over 50 years old and are approaching the end of their operating lives. Unanticipated and extended shutdowns of some of these old reactors have resulted in severe Mo-99 supply shortages in the United States and other countries. Some of these shortages have disrupted the delivery of medical care. Molybdenum-99 for Medical Imaging examines the production and utilization of Mo-99 and associated medical isotopes, and provides recommendations for medical use.
Download or read book Nuclear Waste Conditioning written by France. Commissariat à l'énergie atomique (CEA) and published by Le Moniteur Editions. This book was released on 2009 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemically Bonded Phosphate Ceramics written by Arun S. Wagh and published by Elsevier. This book was released on 2016-05-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically Bonded Phosphate Ceramics brings together the latest developments in chemically bonded phosphate ceramics (CBPCs), including several novel ceramics, from US Federal Laboratories such as Argonne, Oak Ridge, and Brookhaven National Laboratories, as well as Russian and Ukrainian nuclear institutes. Coupled with further advances in their use as biomaterials, these materials have found uses in diverse fields in recent years. Applications range from advanced structural materials to corrosion and fire protection coatings, oil-well cements, stabilization and encapsulation of hazardous and radioactive waste, nuclear radiation shielding materials, and products designed for safe storage of nuclear materials. Such developments call for a single source to cover their science and applications. This book is a unique and comprehensive source to fulfil that need. In the second edition, the author covers the latest developments in nuclear waste containment and introduces new products and applications in areas such as biomedical implants, cements and coatings used in oil-well and other petrochemical applications, and flame-retardant anti-corrosion coatings. - Explores the key applications of CBPCs including nuclear waste storage, oil-well cements, anticorrosion coatings and biomedical implants - Demystifies the chemistry, processes and production methods of CBPCs - Draws on 40 years of developments and applications in the field, including the latest developments from USA, Europe, Ukraine, Russia, China and India
Download or read book The EBR II Fuel Cycle Story written by Charles E. Stevenson and published by . This book was released on 1987 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this comprehensive volume, Stevenson recounts the history of the Experimental Breeder Reactor-II (EBR-II), the Fuel Cycle Facility (FCF), and the process requirements of this unique technology. The author also explains the reasons behind the remarkable success of both the EBR-II and the FCF. These data, presented as a useful information source, should be of considerable significance to the continuing development of nuclear power.
Download or read book Uranium Enrichment and Nuclear Weapon Proliferation written by Allan S. Krass and published by Routledge. This book was released on 2020-11-20 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1983, this book presents both the technical and political information necessary to evaluate the emerging threat to world security posed by recent advances in uranium enrichment technology. Uranium enrichment has played a relatively quiet but important role in the history of efforts by a number of nations to acquire nuclear weapons and by a number of others to prevent the proliferation of nuclear weapons. For many years the uranium enrichment industry was dominated by a single method, gaseous diffusion, which was technically complex, extremely capital-intensive, and highly inefficient in its use of energy. As long as this remained true, only the richest and most technically advanced nations could afford to pursue the enrichment route to weapon acquisition. But during the 1970s this situation changed dramatically. Several new and far more accessible enrichment techniques were developed, stimulated largely by the anticipation of a rapidly growing demand for enrichment services by the world-wide nuclear power industry. This proliferation of new techniques, coupled with the subsequent contraction of the commercial market for enriched uranium, has created a situation in which uranium enrichment technology might well become the most important contributor to further nuclear weapon proliferation. Some of the issues addressed in this book are: A technical analysis of the most important enrichment techniques in a form that is relevant to analysis of proliferation risks; A detailed projection of the world demand for uranium enrichment services; A summary and critique of present institutional non-proliferation arrangements in the world enrichment industry, and An identification of the states most likely to pursue the enrichment route to acquisition of nuclear weapons.
Download or read book Thorium Fuel Cycle written by International Atomic Energy Agency and published by . This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a critical review of the thorium fuel cycle: potential benefits and challenges in the thorium fuel cycle, mainly based on the latest developments at the front end of the fuel cycle, applying thorium fuel cycle options, and at the back end of the thorium fuel cycle.
Download or read book Molten Salts Chemistry written by FREDERIC Lantelme and published by Elsevier. This book was released on 2013-08-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molten salts and fused media provide the key properties and the theory of molten salts, as well as aspects of fused salts chemistry, helping you generate new ideas and applications for fused salts. Molten Salts Chemistry: From Lab to Applications examines how the electrical and thermal properties of molten salts, and generally low vapour pressure are well adapted to high temperature chemistry, enabling fast reaction rates. It also explains how their ability to dissolve many inorganic compounds such as oxides, nitrides, carbides and other salts make molten salts ideal as solvents in electrometallurgy, metal coating, treatment of by-products and energy conversion. This book also reviews newer applications of molten salts including materials for energy storage such as carbon nano-particles for efficient super capacitors, high capacity molten salt batteries and for heat transport and storage in solar plants. In addition, owing to their high thermal stability, they are considered as ideal candidates for the development of safer nuclear reactors and for the treatment of nuclear waste, especially to separate actinides from lanthanides by electrorefining.
Download or read book Disposition of High Level Waste and Spent Nuclear Fuel written by National Research Council and published by National Academies Press. This book was released on 2001-07-05 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused attention by world leaders is needed to address the substantial challenges posed by disposal of spent nuclear fuel from reactors and high-level radioactive waste from processing such fuel. The biggest challenges in achieving safe and secure storage and permanent waste disposal are societal, although technical challenges remain. Disposition of radioactive wastes in a deep geological repository is a sound approach as long as it progresses through a stepwise decision-making process that takes advantage of technical advances, public participation, and international cooperation. Written for concerned citizens as well as policymakers, this book was sponsored by the U.S. Department of Energy, U.S. Nuclear Regulatory Commission, and waste management organizations in eight other countries.
Download or read book Management of Recyclable Fissile and Fertile Materials written by and published by . This book was released on 2007 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in nuclear energy continues to grow in many countries as a means to ensure security of energy supply and to limit greenhouse gas emissions from the power sector. In this context, recyclable materials constitute an asset for broadening the resource base for nuclear fuel supply, especially in medium- and long-term perspectives. This report provides an overview of recyclable fissile and fertile materials inventories which can be reused as nuclear fuel. It reviews the options available for managing those materials, through recycling and/or disposal. The potential energetic value of recyclable materials is assessed, taking into account the variability of retrievable energy contents of various materials according to technology and strategy choices made by the owners of the materials. The analyses contained in this report will be of particular interest to energy policy makers and to nuclear fuel cycle experts. Also available in this series: Innovation in Nuclear Energy Technology (2007) Forty Years of Uranium Resources, Production and Demand in Perspective: The Red Book Retrospective (2006) Nuclear Power Plant Life Management and Longer-term Operation (2006)
Download or read book Decommissioning of Nuclear Facilities written by OECD Nuclear Energy Agency and published by Nuclear Energy Agency, Organisation for Economic Co-operation and Development ; Washington, D.C. : OECD Publications and Information Centre. This book was released on 1991 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography on Nuclear Reactor Fuel Reprocessing and Waste Disposal Fission product poison and radioisotope removal written by T. F. Connolly and published by . This book was released on 1960 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-02 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Materials for Advanced Technologies written by T.D. Burchell and published by . This book was released on 1999-07-22 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study begins with a review of carbon materials, emphasizing structure and chemical bonding in various forms of carbon. It then goes on to discuss advanced technologies for the manufacture and modification of carbon-based materials and their practical applications.
Download or read book State of the Art Review on Product Recovery written by Resource Engineering Associates and published by . This book was released on 1969 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
