Download or read book Traveling Wave Ultrasonic Motors Based on the Piezoelectric Shear Effect written by Martin Schönecker and published by . This book was released on 2009 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piezoelectric Travelling Wave Ultrasonic Motors Based on the Shear Effect with Radially Polarised Annular Stator written by Ana Costa Conrado and published by . This book was released on 2011 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic Motors written by Chunsheng Zhao and published by Springer Science & Business Media. This book was released on 2011-10-23 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive tutorial on ultrasonic motors for practicing engineers, researchers and graduate students. "Ultrasonic Motors: Technologies and Applications" describes the operating mechanism, electromechanical coupling models, optimization design of structural parameters, testing methods, and drive/control techniques of various ultrasonic motors and their applications. Dr. Chunsheng Zhao is a professor at Nanjing University of Aeronautics and Astronautics (NUAA) where he is Director of the Precision Driving Laboratory at NUAA. He is a member of the Chinese Academy of Science, and holds 54 patents in China and published more than 400 papers in the field of piezoelectric ultrasonic motors.
Download or read book Control of Travelling Wave Ultrasonic Motors written by Sheung-Wai Chung and published by Open Dissertation Press. This book was released on 2017-01-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Control of Travelling-wave Ultrasonic Motors" by Sheung-wai, Chung, 鍾尚威, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled Control of Travelling-wave Ultrasonic Motors submitted by CHUNG, Sheung Wai for the degree of Doctor of Philosophy at the University of Hong Kong in April 2006 A traveling-wave ultrasonic motor (TUSM) converts electricity into mechanical motion using piezoelectric effect. Generally two AC sinusoidal voltages with finite phase difference are employed to produce a continuous, time-varying bending of the stator. Such bending forms a traveling-wave along the surface of the stator. Since the rotor is hard pressed to the stator by a pressure disc, it is driven into rotation. The TUSM features a high holding torque. It offers a high torque at low speed characteristics. Its response is fast and it is much more than the traditional DC servomotor. Since it utilizes piezoelectric effect, there is no electromagnetic interference. Although the TUSM is very suitable for many mechatronic applications, its speed exhibits nonlinear response to controllable inputs. Such peculiarity presents a significant challenge for servo control using the TUSM. Different approaches of modeling have been adopted. These include equivalent circuit analysis, analytic approaches and finite element analysis. Unfortunately, they are either too complex or computationally intensive for controller design and simulation. In consequence, various empirical controllers have been employed. The first objective of this project is to develop a practical model of TUSM for control purposes. It relates the controllable inputs to the output torque of the TUSM. The second objective is to utilize this model to develop various modes of torque control, thus demonstrating its effectiveness. Both passive compliance and active speed controls are developed. Passive compliance control includes both the self-locking torque control and the reacting torque control. Neurofuzzy control and a practical model-based control have been explored for active speed control. Hence, all the control strategies which are essential for a robot manipulator are available, allowing TUSM to be deployed to it. A digital signal processing (DSP) based control system has been developed for experimental purpose. It consists of a DSP microcontroller, a power electronic drive, a TUSM and an optical encoder. The microcontroller provides two trains of PWM signals with variable frequency and duty ratio to the drive. The frequency expands the controllable speed span and the duty ratio offers a partial linear relationship to the motor torque. Through resonance, the drive converts a dc voltage into two sinusoidal voltages with finite phase difference. They are required to drive the TUSM. The optical encoder provides speed feedback to the microcontroller. This DSP-based system can therefore readily be deployed for standalone embedded mechatronic system. Experiments have demonstrated the effectiveness of self-locking torque and reacting torque control. Superior performance in tracking and disturbance rejection is also observed in both neurofuzzy and practical model-based controls. An abstract of exactly 419 words Signed ________________ Chung Sheung Wai DOI: 10.5353/th_b3689003 Subjects: Ultrasonic motors Servomechanisms
Download or read book Modeling of Piezoelectric Traveling Wave Ultrasonic Motors written by Jayakumar Chandrasekar and published by . This book was released on 1996 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of the Stator of Piezoelectric Traveling Wave Rotary Ultrasonic Motors written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of the Stator of Piezoelectric Traveling Wave Rotary Ultrasonic Motors written by Valentin Bolborici and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis is concerned with the modeling of the stator of a piezoelectric traveling wave rotary ultrasonic motor. Existing models for piezoelectric traveling wave rotary ultrasonic motors are either too complicated to be used in motor control or do not reflect the real behavior of the motor and are of limited use in developing a controller for the motor. Finite Element methods have been used in the past to examine the properties of piezoelectric structures however, the Finite Volume Method has always been ruled out without justification. The main goal of this thesis is to provide a Finite Volume modeling approach for the stator of the piezoelectric traveling wave rotary ultrasonic motor taking into account the basic theoretical principles from piezoelectricity and structural mechanics. This model can in future be extended to develop a complete model of the motor in addition to other piezoelectric structures. The Finite Volume Method is shown to have the following specific advantages over the Finite Element Method especially for structures with simple geometries: 1. the Finite Volume Method respects the PDEs conservation law structure due to the fact that the fluxes are conserved between cells/domains/subregions, 2. the Finite Volume Method involves only surface integrals thus making it easier to implement a rotor-stator contact model as the contact mechanism occurs at the boundary of the stator, and 3. the Finite Volume Method yields a system of ODEs that more intuitively map onto circuit simulation software. The Finite Volume Method is initially used to model a simple piezoelectric plate. A corresponding circuit of the piezoelectric plate model, based on the Finite Volume Method, is generated. Two additional but more complex models are considered: one for a unimorph plate and one for the stator of an ultrasonic motor. The modeling results obtained with the Finite Volume Method are validated by comparing them with the results obtained with Finite Element simulations performed with COMSOL. Two test platforms designed to test and validate the Finite Volume and COMSOL results for the simple piezoelectric plates and piezoelectric traveling wave rotary ultrasonic motors are also presented in this thesis.
Download or read book Modeling of Piezoelectric Traveling Wave Rotary Ultrasonic Motors with the Finite Volume Method written by Ivan Arturo Renteria Marquez and published by . This book was released on 2016 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piezoelectric Actuators written by Hu Huang and published by BoD – Books on Demand. This book was released on 2021-12-08 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking advantage of high resolution, rapid response, and compact structure, piezoelectric actuators are widely employed for achieving precision positioning in both scientific research and industrial application. With the development of science and technology, the requirements for precision positioning are increasing. Accordingly, great efforts have been made to improve the performances of piezoelectric actuators, and significant progress has been achieved. This book discusses some recent achievements and developments of piezoelectric actuators, in terms of piezoelectric material, driving principle, structural design, modeling, and control, as well as applications.
Download or read book Piezoelectricity Acoustic Waves and Device Applications written by Weiqiu Chen and published by World Scientific. This book was released on 2007 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers important subjects in the field of piezoelectric devices and applications with the latest research on piezoelectricity, acoustic waves, manufacturing technology, and design techniques. It includes up-to-date research and information on materials, new products, technological trends, and design methods of benefit to academics and researchers in the piezoelectric device industry. Contributors to this volume include prominent experts such as Clemens Ruppel of Epcos, Daining Fang of Tsinghua University, Tong-Yi Zhang of University of Science and Technology, Hong Kong, and CS Lam of TXC Corporation. A number of papers have been dedicated to Professor Harry F Tiersten of Resselear Polytechnic Institute, who passed away in 2006, for his contributions to the fundamental theory of piezoelectricity and methods for acoustic wave device analysis.
Download or read book The Dynamics of Combined Axial torsional Standing wave Ultrasonic Motors written by Daniel Kuang-Chen Liu and published by . This book was released on 2009 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoelectric ultrasonic motors have the potential to enable important applications such as endovasular surgical micro-robots due to their high torque and power density at the 0.1-1 mm diameter range. A type of ultrasonic motor that is suitable for miniaturization is the combined axial-torsional standing-wave (CATS) ultrasonic motor that generates the CATS stator motionvia pretwisted beam vibration converters.The operation of the motor involves (1) the generation of an ellipse-like stator tip trajectory when the pretwisted-beam stator is excited to vibrate in a CATS motion by a piezoelectric transducer, and (2) the transfer of frictional torque when the rotor is pressed against the stator tip. To gain a better understanding of the CATS ultrasonic motor, centimeter-scale prototypes were fabricated and tested to determine the characteristics of the motor design. Theoretical models of the pretwisted beam stator and the torque transfer mechanism were also investigated to help us predict the effects of various design parameters.The axial and torsional resonance frequencies of the pretwisted-beam stator needs to be matched for an effcient generation of the CATS stator motion. To help designers select the right analysis method for the design process, we investigated the validity of common pretwisted beam theories that assume the warping function of a pretwisted beam is locally identical to that of a prismatic beam. Through a scaling analysis of the equations governing the warping function of pretwisted beams -- derived using semi-inverse method and Hamilton's principle -- we obtained a set of criteria for checking the validity of the assumption. These criteria allow us to determine at what geometries the use of prismatic warping function will result in poor predictions of the axial resonance frequency and that alternative modelling methods are needed.Existing models of CATS motors ignore the vertical displacement of the rotor, predicting periodic behaviours that are contrary to the apparently random oscillations observed in the motor's steady-state operation. Our incorporation of the rotor's vertical motion results in a bouncing-disk model that explains various behaviours of the motor prototype, including the oscillations in the transient speed-time curve, and the effect of preload on stall torque and steady-state speed. The nonlinear dynamical system formed by the bouncing disk model shows that different stator trajectories and interface properties can give rise to complex phenomena such as period doubling bifurcation, chaos, and extremely long period "chattering orbits". Knowledge of the location and basins of attraction for these orbits gives us detailed understanding of the motor's behaviour that will help designers improve the performance of CATS ultrasonic motor.
Download or read book An Introduction to Ultrasonic Motors written by Toshiiku Sashida and published by Monographs in Electrical and E. This book was released on 1993 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultrasonic motor, invented in 1980, utilizes the piezoelectric effect in the ultrasonic frequency range to provide its motive force, resulting in a motor with unusually good low-speed, high-torque and power-to-weight characteristics. This introduction to the general theory of the ultrasonic motor was written by the motor's inventor and an expert in conventional electric motors. It details many of the motor's applications, including those in camera autofocus mechanisms, medical equipment subject to high magnetic fields, and motorized car accessories. Electrical and electronic research engineers as well as students will find this an invaluable introduction to this important new invention.
Download or read book Piezoelectricity Acoustic Waves And Device Applications Proceedings Of The 2006 Symposium written by Ji Wang and published by World Scientific. This book was released on 2007-09-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers important subjects in the field of piezoelectric devices and applications with the latest research on piezoelectricity, acoustic waves, manufacturing technology, and design techniques. It includes up-to-date research and information on materials, new products, technological trends, and design methods of benefit to academics and researchers in the piezoelectric device industry. Contributors to this volume include prominent experts such as Clemens Ruppel of Epcos, Daining Fang of Tsinghua University, Tong-Yi Zhang of University of Science and Technology, Hong Kong, and CS Lam of TXC Corporation. A number of papers have been dedicated to Professor Harry F Tiersten of Resselear Polytechnic Institute, who passed away in 2006, for his contributions to the fundamental theory of piezoelectricity and methods for acoustic wave device analysis.
Download or read book Modeling Design Development and Testing of a Piezoelectric Traveling Wave Rotary Ultrasonic Motor for Space Applications written by Andrew John McFarland and published by . This book was released on 1995 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Dynamics of Combined Axial torsional Standing wave Ultrasonic Motors written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoelectric ultrasonic motors have the potential to enable important applications such as endovasular surgical micro-robots due to their high torque and power density at the 0.1-1 mm diameter range. A type of ultrasonic motor that is suitable for miniaturization is the combined axial-torsional standing-wave (CATS) ultrasonic motor that generates the CATS stator motion via pretwisted beam vibration converters. The operation of the motor involves (1) the generation of an ellipse-like stator tip trajectory when the pretwisted-beam stator is excited to vibrate in a CATS motion by a piezoelectric transducer, and (2) the transfer of frictional torque when the rotor is pressed against the stator tip. To gain a better understanding of the CATS ultrasonic motor, centimeter-scale prototypes were fabricated and tested to determine the characteristics of the motor design. Theoretical models of the pretwisted beam stator and the torque transfer mechanism were also investigated to help us predict the effects of various design parameters. The axial and torsional resonance frequencies of the pretwisted-beam stator needs to be matched for an effcient generation of the CATS stator motion. To help designers select the right analysis method for the design process, we investigated the validity of common pretwisted beam theories that assume the warping function of a pretwisted beam is locally identical to that of a prismatic beam. Through a scaling analysis of the equations governing the warping function of pretwisted beams -- derived using semi-inverse method and Hamilton's principle -- we obtained a set of criteria for checking the validity of the assumption. These criteria allow us to determine at what geometries the use of prismatic warping function will result in poor predictions of the axial resonance frequency and that alternative modelling methods are needed. Existing models of CATS motors ignore the vertical displacement of the rotor, predicting periodic behaviours that are co.
Download or read book Ultrasonic Motors written by S. Ueha and published by Oxford University Press, USA. This book was released on 1993 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a completely up-to-date survey of the many different types of ultrasonic motors currently in use. These motors, which use ultrasonic vibrations to produce a frictional driving force, have many attractive features, including simple structures which can easily be miniaturized, large power to weight ratios, high torque at low speed, high precision due to low inertia and easy electronic control, and no associated magnetic field. With such advantages, they are increasingly displacing conventional electromagnetic motors in robot actuators, camera autofocus mechanisms, and aerospace devices, to name a few examples. Written by leading experts on the subject, the book introduces the reader to the design and manufacture of the motor as well as to techniques for evaluating motor performance. It will be an invaluable guide to electrical engineering researchers, designers, and manufacturers.
Download or read book Dynamics Of Mechatronics Systems Modeling Simulation Control Optimization And Experimental Investigations written by Jan Awrejcewicz and published by World Scientific. This book was released on 2016-08-10 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the interplay of mechanics, electronics, electrotechnics, automation and biomechanics. It provides a broad overview of mechatronics systems ranging from modeling and dimensional analysis, and an overview of magnetic, electromagnetic and piezo-electric phenomena. It also includes the investigation of the pneumo-fluid-mechanical, as well as electrohydraulic servo systems, modeling of dynamics of an atom/particle embedded in the magnetic field, integrity aspects of the Maxwell's equations, the selected optimization problems of angular velocity control of a DC motor subjected to chaotic disturbances with and without stick-slip dynamics, and the analysis of a human chest adjacent to the elastic backrest aimed at controlling force to minimize relative compression of the chest employing the LQR.This book provides a theoretical background on the analysis of various kinds of mechatronics systems, along with their computational analysis, control, optimization as well as laboratory investigations.
