Download or read book Transport Processes at Taylor Bubbles in Vertical Channels written by Sven Kastens and published by Cuvillier Verlag. This book was released on 2021-04-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas / liquid contact apparatuses are widely used in chemical, biochemical or pharmaceutical industry to provide and transfer gas species as reactant from the gaseous phase to pre-dissolved reactants in the liquid phase enabling a preferred reaction. The global and local transport are complex interlinked processes and therefore in practice in reactor design industry, mostly empirically correlated. For a secure control of the overall process and a more efficient reactor design, the local transport processes at gas / liquid interfaces need to be investigated in complexity reduced systems to be understood. Elongated bubbles, Taylor bubbles, in vertical channels 5.5 < D < 8 mm overcome the problem of dynamic shape deformation, complex 3D rise trajectories and they have a volume independent rise velocity, which make them the ideal experiment for reliable and reproducible investigations. Detailed optical measurements of global and local processes via high-speed Shadowgraphy, 2D2C PIV and p-2D LIF give new insights into the dependency of local bubble shape and global terminal rise velocity, establish a Sherwood correlation of shrinking CO2 bubbles in various channel sizes and shows the coupling of local transport phenomena at the bubble interface and the mixing in the wake region.
Download or read book Transport Processes at Fluidic Interfaces written by Dieter Bothe and published by Birkhäuser. This book was released on 2017-07-13 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are several physico-chemical processes that determine the behavior of multiphase fluid systems – e.g., the fluid dynamics in the different phases and the dynamics of the interface(s), mass transport between the fluids, adsorption effects at the interface, and transport of surfactants on the interface – and result in heterogeneous interface properties. In general, these processes are strongly coupled and local properties of the interface play a crucial role. A thorough understanding of the behavior of such complex flow problems must be based on physically sound mathematical models, which especially account for the local processes at the interface. This book presents recent findings on the rigorous derivation and mathematical analysis of such models and on the development of numerical methods for direct numerical simulations. Validation results are based on specifically designed experiments using high-resolution experimental techniques. A special feature of this book is its focus on an interdisciplinary research approach combining Applied Analysis, Numerical Mathematics, Interface Physics and Chemistry, as well as relevant research areas in the Engineering Sciences. The contributions originated from the joint interdisciplinary research projects in the DFG Priority Programme SPP 1506 “Transport Processes at Fluidic Interfaces.”
Download or read book Reactive Bubbly Flows written by Michael Schlüter and published by Springer Nature. This book was released on 2021-07-29 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental and numerical methods that have been developed during six years of targeted research within the DFG priority program SPP 1740, elucidating the interaction between hydrodynamics, mass transfer and transport as well as chemical reactions in bubbly flows. A special feature of this book is its focus on an interdisciplinary research approach with contributions from chemistry, mathematics and engineering sciences, providing enhanced or novel experimental methods, models and numerical simulations. This book provides fundamental knowledge to students about the current state of knowledge regarding transport processes in reactive bubbly flows as well as to scientists, emphasizing pressing research questions and further current demands for fundamental research. Engineers from the chemical industries will get valuable insights into relevant gas-liquid processes and benefit from recommendations concerning the design of gas-liquid reactors and laboratory experiments for studying the performance of gas-liquid reactions in their own lab.
Download or read book Transport Processes in Bubbles Drops and Particles written by Daniel DeKee and published by CRC Press. This book was released on 2002-06-14 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the advances in the transport phenomena of particles, drops and bubbles in complex fluids. This book contains contributions from experts in areas such as particle deposition in membranes, flow of granular mixtures, food suspensions, foams, electro kinetic and thermo capillary driven flows, and two-phase flows.
Download or read book Transport Processes In Bubbles Drops And Particles written by R. P. Chhabra and published by Taylor & Francis. This book was released on 1992-01-06 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains state-of-the-art reviews and contributions by recognized experts in the field of transport processes involving bubbles, drops, and particles. The authors have updated and complemented earlier works by addressing a diversified range of topics including electrochemical, space, and non-Newtonian applications. Of interest to all those engaged in basic and applied research, the information presented here should be equally valuable to practicing engineers.
Download or read book Process Analysis Design and Intensification in Microfluidics and Chemical Engineering written by Santana, Harrson Silva and published by IGI Global. This book was released on 2019-01-18 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics represent great potential for chemical processes design, development, optimization, and chemical engineering bolsters the project design of industrial processes often found in large chemical plants. Together, microfluidics and chemical engineering can lead to a more complete and comprehensive process. Process Analysis, Design, and Intensification in Microfluidics and Chemical Engineering provides emerging research exploring the theoretical and practical aspects of microfluidics and its application in chemical engineering with the intention of building pathways for new processes and product developments in industrial areas. Featuring coverage on a broad range of topics such as design techniques, hydrodynamics, and numerical modelling, this book is ideally designed for engineers, chemists, microfluidics and chemical engineering companies, academicians, researchers, and students.
Download or read book Computational Methods for Complex Liquid Fluid Interfaces written by Mohammad Taeibi Rahni and published by CRC Press. This book was released on 2015-11-11 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Complex Liquid-Fluid Interfaces highlights key computational challenges involved in the two-way coupling of complex liquid-fluid interfaces. The book covers a variety of cutting-edge experimental and computational techniques ranging from macro- to meso- and microscale approaches (including pivotal applications). As example
Download or read book Hydrodynamics of Gas Liquid Reactors written by Barry Azzopardi and published by John Wiley & Sons. This book was released on 2011-05-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of chemical reactors and their safety are as critical to the success of a chemical process as the actual chemistry taking place within the reactor. This book provides a comprehensive overview of the practical aspects of multiphase reactor design and operation with an emphasis on safety and clean technology. It considers not only standard operation conditions, but also the problems of runaway reaction conditions and protection against ensuing over-pressure. Hydrodynamics of Multiphase Reactors addresses both practical and theoretical aspects of this topic. Initial chapters discuss various different types of gas/liquid reactors from a practical viewpoint, and later chapters focus on the modelling of multiphase systems and computational methods for reactor design and problem solving. The material is written by experts in their specific fields and will include chapters on the following topics: Multiphase flow, Bubble columns, Sparged stirred vessels, Macroscale modelling, Microscale modelling, Runaway conditions, Behaviour of vessel contents, Choked flow, Measurement techniques.
Download or read book Microchannel Phase Change Transport Phenomena written by Sujoy Kumar Saha and published by Butterworth-Heinemann. This book was released on 2015-09-27 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microchannel Heat transfer is the cooling application of high power density microchips in the CPU system, micropower systems and many other large scale thermal systems requiring effective cooling capacity. This book offers the latest research and recommended models on the microsize cooling system which not only significantly reduces the weight load, but also enhances the capability to remove much greater amount of heat than any of large scale cooling systems. A detailed reference in microchannel phase change (boiling and condensation) including recommended models and correlations for various requirements such as pressure loss, and heat transfer coefficient. Researchers, engineers, designers and students will benefit from the collated, state-of-the-art of the research put together in this book and its systematic, addressing all the relevant issues and providing a good reference for solving problems of critical analysis. - Up-to-date information will help delineate further research direction in the microchannel heat transfer - The latest modeling information and recommendations will help in design method and purpose
Download or read book Hydrodynamics and Transport Processes of Inverse Bubbly Flow written by Subrata Kumar Majumder and published by Elsevier. This book was released on 2016-03-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics and Transport Processes of Inverse Bubbly Flow provides the science and fundamentals behind hydrodynamic characteristics, including flow regimes, gas entrainment, pressure drop, holdup and mixing characteristics, bubble size distribution, and the interfacial area of inverse bubble flow regimes. Special attention is given to mass and heat transfer. This book is an indispensable reference for researchers in academia and industry working in chemical and biochemical engineering. Hydrodynamics and Transport Processes of Inverse Bubbly Flow helps facilitate a better understanding of the phenomena of multiphase flow systems as used in chemical and biochemical industries. - A first book in the market dedicated to the hydrodynamics of inverse bubbly flows - Includes fundamentals of conventional and inverse bubble columns for different hydrodynamic parameters - Includes recommendations for future applications of bubble flows
Download or read book Computational Science ICCS 2022 written by Derek Groen and published by Springer Nature. This book was released on 2022-06-21 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 13350, 13351, 13352, and 13353 constitutes the proceedings of the 22ndt International Conference on Computational Science, ICCS 2022, held in London, UK, in June 2022.* The total of 175 full papers and 78 short papers presented in this book set were carefully reviewed and selected from 474 submissions. 169 full and 36 short papers were accepted to the main track; 120 full and 42 short papers were accepted to the workshops/ thematic tracks. *The conference was held in a hybrid format
Download or read book Particles Bubbles Drops written by Efstathios Michaelides and published by World Scientific. This book was released on 2006 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of multiphase flows has grown by leaps and bounds in the last thirty years and is now regarded as a major discipline. Engineering applications, products and processes with particles, bubbles and drops have consistently grown in number and importance. An increasing number of conferences, scientific fora and archived journals are dedicated to the dissemination of information on flow, heat and mass transfer of fluids with particles, bubbles and drops. Numerical computations and "thought experiments" have supplemented most physical experiments and a great deal of the product design and testing processes. The literature on computational fluid dynamics with particles, bubbles and drops has grown at an exponential rate, giving rise to new results, theories and better understanding of the transport processes with particles, bubbles and drops. This book captures and summarizes all these advances in a unified, succinct and pedagogical way. Contents: Fundamental Equations and Characteristics of Particles, Bubbles and Drops; Low Reynolds Number Flows; High Reynolds Number Flows; Non-Spherical Particles, Bubbles and Drops; Effects of Rotation, Shear and Boundaries; Effects of Turbulence; Electro-Kinetic, Thermo-Kinetic and Porosity Effects; Effects of Higher Concentration and Collisions; Molecular and Statistical Modeling; Numerical Methods-CFD. Key Features Summarizes the recent important results in the theory of transport processes of fluids with particles, bubbles and drops Presents the results in a unified and succinct way Contains more than 600 references where an interested reader may find details of the results Makes connections from all theories and results to physical and engineering applications Readership: Researchers, practicing engineers and physicists that deal with any aspects of Multiphase Flows. It will also be of interest to academics and researchers in the general fields of mechanical and chemical engineering.
Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2017-01-11 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction to the fundamentals and applications of flow and heat transfer in conventional and miniature systems, this fully enhanced and updated edition covers all the topics essential for graduate courses on two-phase flow, boiling, and condensation. Beginning with a concise review of single-phase flow fundamentals and interfacial phenomena, detailed and clear discussion is provided on a range of topics, including two-phase hydrodynamics and flow regimes, mathematical modeling of gas-liquid two-phase flows, pool and flow boiling, flow and boiling in mini and microchannels, external and internal-flow condensation with and without noncondensables, condensation in small flow passages, and two-phase choked flow. Numerous solved examples and end-of-chapter problems that include many common design problems likely to be encountered by students, make this an essential text for graduate students. With up-to-date detail on the most recent research trends and practical applications, it is also an ideal reference for professionals and researchers in mechanical, nuclear, and chemical engineering.
Download or read book Micro Process Engineering 3 Volume Set written by Volker Hessel and published by John Wiley & Sons. This book was released on 2009-03-23 with total page 1413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume handbook provides an overview of the key aspects of micro process engineering. Volume 1 covers the fundamentals, operations and catalysts, volume 2 examines devices, reactions and applications, with volume 3 rounding off the trilogy with system, process and plant engineering. Fluid dynamics, mixing, heat/mass transfer, purification and separation microstructured devices and microstructured reactors are explained in the first volume. Volume 2 segments microreactor design, fabrication and assembly, bulk and fine chemistry, polymerisation, fuel processing and functional materials into understandable parts. The final volume of the handbook addresses microreactor systems design and scale-up, sensing, analysis and control, chemical process engineering, economic and eco-efficiency analyses as well as microreactor plant case studies in one book. Together, this 3-volume handbook explains the science behind micro process engineering to the scale-up and their real life industrial applications.
Download or read book The Rise of Taylor Bubbles in Vertical Pipes written by Stephen Ambrose and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2009-12-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Frontiers in Water Rising Stars 2021 written by Auroop Ratan Ganguly and published by Frontiers Media SA. This book was released on 2022-11-14 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
