Download or read book Transport Phenomena Fundamentals Third Edition written by Joel L. Plawsky and published by CRC Press. This book was released on 2014-01-23 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Transport Phenomena Fundamentals continues with its streamlined approach to the subject of transport phenomena, based on a unified treatment of heat, mass, and momentum transport using a balance equation approach. The new edition makes more use of modern tools for working problems, such as COMSOL®, Maple®, and MATLAB®. It introduces new problems at the end of each chapter and sorts them by topic for ease of use. It also presents new concepts to expand the utility of the text beyond chemical engineering. The text is divided into two parts, which can be used for teaching a two-term course. Part I covers the balance equation in the context of diffusive transport—momentum, energy, mass, and charge. Each chapter adds a term to the balance equation, highlighting that term's effects on the physical behavior of the system and the underlying mathematical description. Chapters familiarize students with modeling and developing mathematical expressions based on the analysis of a control volume, the derivation of the governing differential equations, and the solution to those equations with appropriate boundary conditions. Part II builds on the diffusive transport balance equation by introducing convective transport terms, focusing on partial, rather than ordinary, differential equations. The text describes paring down the microscopic equations to simplify the models and solve problems, and it introduces macroscopic versions of the balance equations for when the microscopic approach fails or is too cumbersome. The text discusses the momentum, Bournoulli, energy, and species continuity equations, including a brief description of how these equations are applied to heat exchangers, continuous contactors, and chemical reactors. The book also introduces the three fundamental transport coefficients: the friction factor, the heat transfer coefficient, and the mass transfer coefficient in the context of boundary layer theory. The final chapter covers the basics of radiative heat transfer, including concepts such as blackbodies, graybodies, radiation shields, and enclosures. The third edition incorporates many changes to the material and includes updated discussions and examples and more than 70 new homework problems.

Download or read book Transport Phenomena Fundamentals written by Joel L. Plawsky and published by CRC Press. This book was released on 2020-02-27 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of Transport Phenomena Fundamentals continues with its streamlined approach to the subject, based on a unified treatment of heat, mass, and momentum transport using a balance equation approach. The new edition includes more worked examples within each chapter and adds confidence-building problems at the end of each chapter. Some numerical solutions are included in an appendix for students to check their comprehension of key concepts. Additional resources online include exercises that can be practiced using a wide range of software programs available for simulating engineering problems, such as, COMSOL®, Maple®, Fluent, Aspen, Mathematica, Python and MATLAB®, lecture notes, and past exams. This edition incorporates a wider range of problems to expand the utility of the text beyond chemical engineering. The text is divided into two parts, which can be used for teaching a two-term course. Part I covers the balance equation in the context of diffusive transport—momentum, energy, mass, and charge. Each chapter adds a term to the balance equation, highlighting that term's effects on the physical behavior of the system and the underlying mathematical description. Chapters familiarize students with modeling and developing mathematical expressions based on the analysis of a control volume, the derivation of the governing differential equations, and the solution to those equations with appropriate boundary conditions. Part II builds on the diffusive transport balance equation by introducing convective transport terms, focusing on partial, rather than ordinary, differential equations. The text describes paring down the full, microscopic equations governing the phenomena to simplify the models and develop engineering solutions, and it introduces macroscopic versions of the balance equations for use where the microscopic approach is either too difficult to solve or would yield much more information that is actually required. The text discusses the momentum, Bernoulli, energy, and species continuity equations, including a brief description of how these equations are applied to heat exchangers, continuous contactors, and chemical reactors. The book introduces the three fundamental transport coefficients: the friction factor, the heat transfer coefficient, and the mass transfer coefficient in the context of boundary layer theory. Laminar flow situations are treated first followed by a discussion of turbulence. The final chapter covers the basics of radiative heat transfer, including concepts such as blackbodies, graybodies, radiation shields, and enclosures.

Download or read book Fundamentals of Momentum Heat and Mass Transfer written by James R. Welty and published by . This book was released on 1976 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Phenomena in Multiphase Systems written by Amir Faghri and published by Academic Press. This book was released on 2006 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering students in a wide variety of engineering disciplines from mechanical and chemical to biomedical and materials engineering must master the principles of transport phenomena as an essential tool in analyzing and designing any system or systems wherein momentum, heat and mass are transferred. This textbook was developed to address that need, with a clear presentation of the fundamentals, ample problem sets to reinforce that knowledge, and tangible examples of how this knowledge is put to use in engineering design. Professional engineers, too, will find this book invaluable as reference for everything from heat exchanger design to chemical processing system design and more. * Develops an understanding of the thermal and physical behavior of multiphase systems with phase change, including microscale and porosity, for practical applications in heat transfer, bioengineering, materials science, nuclear engineering, environmental engineering, process engineering, biotechnology and nanotechnology * Brings all three forms of phase change, i.e., liquid vapor, solid liquid and solid vapor, into one volume and describes them from one perspective in the context of fundamental treatment * Presents the generalized integral and differential transport phenomena equations for multi-component multiphase systems in local instance as well as averaging formulations. The molecular approach is also discussed with the connection between microscopic and molecular approaches * Presents basic principles of analyzing transport phenomena in multiphase systems with emphasis on melting, solidification, sublimation, vapor deposition, condensation, evaporation, boiling and two-phase flow heat transfer at the micro and macro levels * Solid/liquid/vapor interfacial phenomena, including the concepts of surface tension, wetting phenomena, disjoining pressure, contact angle, thin films and capillary phenomena, including interfacial balances for mass, species, momentum, and energy for multi-component and multiphase interfaces are discussed * Ample examples and end-of-chapter problems, with Solutions Manual and PowerPoint presentation available to the instructors

Download or read book Transport Phenomena in Micro Process Engineering written by Norbert Kockmann and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the fundamentals of chemical engineering are presented with respect to applications in micro system technology, microfluidics, and transport processes within microstructures. Special features of the book include the state-of-the-art in micro process engineering, a detailed treatment of transport phenomena for engineers, and a design methodology from transport effects to economic considerations.

Download or read book Transport Phenomena Fundamentals Second Edition written by Joel L. Plawsky and published by CRC Press. This book was released on 2009-09-24 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the practice of chemical engineering has broadened to encompass problems in a range of disciplines, including biology, biochemistry, and nanotechnology, one of the curriculum’s foundations is built upon the subject of transport phenomena. Transport Phenomena Fundamentals, Second Edition provides a unified treatment of heat, mass, and momentum transport based on a balance equation approach. Designed for a two-term course Used in a two-term transport phenomena sequence at Rensselaer Polytechnic Institute, this text streamlines the approach to how the subject is taught. The first part of the book takes students through the balance equation in the context of diffusive transport, be it momentum, energy, mass, or charge. Each chapter adds a term to the balance equation, highlighting the effects of that addition on the physical behavior of the system and the underlying mathematical description. The second half of the book builds upon the balance equation description of diffusive transport by introducing convective transport terms, focusing on partial rather than ordinary differential equations. The Navier–Stokes and convective transport equations are derived from balance equations in both macroscopic and microscopic forms. Includes examples and problems drawn from Comsol® software The second edition of this text is now enhanced by the use of finite element methods in the form of examples and extended homework problems. A series of example modules are associated with each chapter of the text. Some of the modules are used to produce examples in the text, and some are discussed in the homework at the end of each chapter. All of the modules are located online at an accompanying website which is designed to be a living component of the course. (available on the download tab)

Download or read book Transport Phenomena Fundamentals written by Joel L. Plawsky and published by CRC Press. This book was released on 2014-01-23 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Transport Phenomena Fundamentals continues with its streamlined approach to the subject of transport phenomena, based on a unified treatment of heat, mass, and momentum transport using a balance equation approach. The new edition makes more use of modern tools for working problems, such as COMSOL®, Maple®, and MATLAB®. It introduces new problems at the end of each chapter and sorts them by topic for ease of use. It also presents new concepts to expand the utility of the text beyond chemical engineering. The text is divided into two parts, which can be used for teaching a two-term course. Part I covers the balance equation in the context of diffusive transport—momentum, energy, mass, and charge. Each chapter adds a term to the balance equation, highlighting that term's effects on the physical behavior of the system and the underlying mathematical description. Chapters familiarize students with modeling and developing mathematical expressions based on the analysis of a control volume, the derivation of the governing differential equations, and the solution to those equations with appropriate boundary conditions. Part II builds on the diffusive transport balance equation by introducing convective transport terms, focusing on partial, rather than ordinary, differential equations. The text describes paring down the microscopic equations to simplify the models and solve problems, and it introduces macroscopic versions of the balance equations for when the microscopic approach fails or is too cumbersome. The text discusses the momentum, Bernoulli, energy, and species continuity equations, including a brief description of how these equations are applied to heat exchangers, continuous contactors, and chemical reactors. The book also introduces the three fundamental transport coefficients: the friction factor, the heat transfer coefficient, and the mass transfer coefficient in the context of boundary layer theory. The final chapter covers the basics of radiative heat transfer, including concepts such as blackbodies, graybodies, radiation shields, and enclosures. The third edition incorporates many changes to the material and includes updated discussions and examples and more than 70 new homework problems.

Download or read book An Introduction to Transport Phenomena in Materials Engineering written by David R. Gaskell and published by Prentice Hall. This book was released on 1992 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to transport phenomena in materials engineering balances an explanation of the fundamentals governing fluid flow and the transport of heat and mass with their common applications to specific systems in materials engineering. It introduces the influences of properties and geometry on fluid flow using familiar fluids such as air and water. Covers topics such as engineering units and pressure in static fluids; momentum transport and laminar flow of Newtonian fluids; equations of continuity and conservation of momentum and fluid flow past submerged objects; turbulent flow; mechanical energy balance and its application to fluid flow; transport of heat by conduction; transport of heat by convection; transient heat flow; heat transport by thermal radiation; mass transport in the solid state by diffusion; mass transport in fluids. Includes extensive appendices.

Download or read book Introductory Transport Phenomena written by R. Byron Bird and published by Wiley Global Education. This book was released on 2015-02-13 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory Transport Phenomena by R. Byron Bird, Warren E. Stewart, Edwin N. Lightfoot, and Daniel Klingenberg is a new introductory textbook based on the classic Bird, Stewart, Lightfoot text, Transport Phenomena. The authors’ goal in writing this book reflects topics covered in an undergraduate course. Some of the rigorous topics suitable for the advanced students have been retained. The text covers topics such as: the transport of momentum; the transport of energy and the transport of chemical species. The organization of the material is similar to Bird/Stewart/Lightfoot, but presentation has been thoughtfully revised specifically for undergraduate students encountering these concepts for the first time. Devoting more space to mathematical derivations and providing fuller explanations of mathematical developments—including a section of the appendix devoted to mathematical topics—allows students to comprehend transport phenomena concepts at an undergraduate level.

Download or read book Transport and Surface Phenomena written by Kamil Wichterle and published by Elsevier. This book was released on 2020-04-24 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport and Surface Phenomena provides an overview of the key transfers taking place in reactions and explores how calculations of momentum, energy and mass transfers can help researchers develop the most appropriate, cost effective solutions to chemical problems. Beginning with a thorough overview of the nature of transport phenomena, the book goes on to explore balances in transport phenomena, including key equations for assessing balances, before concluding by outlining mathematical methods for solving the transfer equations. Drawing on the experience of its expert authors, it is an accessible introduction to the field for students, researchers and professionals working in chemical engineering. The book and is also ideal for those in related fields such as physical chemistry, energy engineering, and materials science, for whom a deeper understanding of these interactions could enhance their work.

Download or read book Transport Phenomena written by Robert Byron Bird and published by . This book was released on 1960 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Transport Phenomena written by William Murray Deen and published by Oxford University Press, USA. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Transport Phenomena, Second Edition, provides a unified treatment of momentum, heat, and mass transfer, emphasizing the concepts and analytical techniques that apply to these transport processes. The second edition has been revised to reinforce the progression from simple to complex topics and to better introduce the applied mathematics that is needed both to understand classical results and to model novel systems. A common set of formulation, simplification, and solution methods is applied first to heat or mass transfer in stationary media and then to fluid mechanics, convective heat or mass transfer, and systems involving various kinds of coupled fluxes. FEATURES: * Explains classical methods and results, preparing students for engineering practice and more advanced study or research * Covers everything from heat and mass transfer in stationary media to fluid mechanics, free convection, and turbulence * Improved organization, including the establishment of a more integrative approach * Emphasizes concepts and analytical techniques that apply to all transport processes * Mathematical techniques are introduced more gradually to provide students with a better foundation for more complicated topics discussed in later chapters

Download or read book An Introduction to Fluid Mechanics and Transport Phenomena written by G. Hauke and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the foundations of fluid mechanics and transport phenomena in a concise way. It is suitable as an introduction to the subject as it contains many examples, proposed problems and a chapter for self-evaluation.

Download or read book Liquid Vapor Phase Change Phenomena written by Van P. Carey and published by CRC Press. This book was released on 2018-05-02 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid-Vapor Phase-Change Phenomena presents the basic thermophysics and transport principles that underlie the mechanisms of condensation and vaporization processes. The text has been thoroughly updated to reflect recent innovations in research and to strengthen the fundamental focus of the first edition. Starting with an integrated presentation of the nonequilibrium thermodynamics and interfacial phenomena associated with vaporization and condensation, coverage follows of the heat transfer and fluid flow mechanisms in such processes. The second edition includes significant new material on the nanoscale and microscale thermophysics of boiling and condensation phenomena and the use of advanced computational tools to create new models of phase-change events. The importance of basic phenomena to a wide variety of applications is emphasized and illustrated throughout using examples and problems. Suitable for senior undergraduate and first-year graduate students in mechanical or chemical engineering, the book can also be a helpful reference for practicing engineers or scientists studying the fundamental physics of nucleation, boiling and condensation.

Download or read book Introduction to Transport Phenomena Modeling written by Gianpaolo Ruocco and published by Springer. This book was released on 2018-02-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers an introduction to multiple, interdependent transport phenomena as they occur in various fields of physics and technology like transport of momentum, heat, and matter. These phenomena are found in a number of combined processes in the fields of chemical, food, biomedical, and environmental sciences. The book puts a special emphasis on numerical modeling of both purely diffusive mechanisms and macroscopic transport such as fluid dynamics, heat and mass convection. To favor the applicability of the various concepts, they are presented with a simplicity of exposure, and synthesis has been preferred with respect to completeness. The book includes more than 130 graphs and figures, to facilitate the understanding of the various topics. It also presents many modeling examples throughout the text, to control that the learned material is properly understood. There are some typos in the text. You can see the corrections here: http://www.springer.com/cda/content/document/cda_downloaddocument/ErrataCorrige_v0.pdf?SGWID=0-0-45-1679320-p181107156

Download or read book Fundamentals of Transport Phenomena in Porous Media written by Jacob Bear and published by Springer. This book was released on 1984-11-30 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Newark, Delaware, July 18-27, 1982

Download or read book Synthetics Mineral Oils and Bio Based Lubricants written by Leslie R. Rudnick and published by CRC Press. This book was released on 2020-01-29 with total page 1195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the major economic and industrial changes in the lubrication industry since the first edition, Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology, Third Edition highlights the major economic and industrial changes in the lubrication industry and outlines the state of the art in each major lubricant application area. Chapters cover the use of lubricant fluids, growth or decline of market areas and applications, potential new applications, production capacities, and regulatory issues, including biodegradability, toxicity, and food production equipment lubrication. The highly-anticipated third edition features new and updated chapters including those on automatic and continuously variable transmission fluids, fluids for food-grade applications, oil-soluble polyalkylene glycols, functional bio-based lubricant base stocks, farnesene-derived polyolefins, estolides, bio-based lubricants from soybean oil, and trends in construction equipment lubrication. Features include: Contains an index of terms, acronyms, and analytical testing methods. Presents the latest conventions for describing upgraded mineral oil base fluids. Considers all the major lubrication areas: engine oils, industrial lubricants, food-grade applications, greases, and space-age applications Includes individual chapters on lubricant applications—such as environmentally friendly, disk drive, and magnetizable fluids—for major market areas around the globe. In a single, unique volume, Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology, Third Edition offers property and performance information of fluids, theoretical and practical background to their current applications, and strong indicators for global market trends that will influence the industry for years to come.