Download or read book Transport in Porous Fibrous Networks written by Xin Cheng and published by . This book was released on 1999 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Fibrous Networks written by Vadim V. Silberschmidt and published by Elsevier. This book was released on 2022-03-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Fibrous Networks covers everything there is to know about the mechanics of fibrous networks, from basic analysis of simple networks to the characterization of complex cases of deformation, loading, damage and fracture. Looking at various types of fibrous materials, the book studies their microstructural characterization, quantification of their mechanical properties, and performance at fiber and network levels. In addition, the book outlines numerical strategies for simulation, design and optimization of fibrous products. Techniques for testing the mechanical response of these materials in different loading and environmental conditions are outlined as well. This comprehensive resource will aid readers in obtaining qualitative data for various fibrous networks. In addition, it will help them develop modeling strategies and fine-tune mechanical performance fibrous networks and products by changing their microstructure to develop new products with desired properties and performance. Discusses all the main features and characteristics of fibrous networks, including their microstructural characterization, quantification of their mechanical properties, and performance at the fiber and network level Covers both basic analysis of simple networks as well as complex cases of deformation, loading, damage and fracture of fibrous networks Outlines advanced numerical schemes for simulation, design and optimization of various fibrous materials
Download or read book Heat and Mass Transfer in Drying of Porous Media written by Peng Xu and published by CRC Press. This book was released on 2019-07-16 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and Mass Transfer in Drying of Porous Media offers a comprehensive review of heat and mass transfer phenomena and mechanisms in drying of porous materials. It covers pore-scale and macro-scale models, includes various drying technologies, and discusses the drying dynamics of fibrous porous material, colloidal porous media and size-distributed particle system. Providing guidelines for mathematical modeling and design as well as optimization of drying of porous material, this reference offers useful information for researchers and students as well as engineers in drying technology, food processes, applied energy, mechanical, and chemical engineering.
Download or read book Porous lightweight composites reinforced with fibrous structures written by Yiqi Yang and published by Springer. This book was released on 2017-07-30 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be a one-stop-shop for readers seeking information on lightweight composites made from multiple materials via diverse processing technologies. The lightweight composites are featured for their potential to be basic construction units in a variety of areas, especially automotive, civil engineering, aerospace engineering, etc. Emphasis will be on how fibers or fibrous structures reinforce the composites. The subject of the book is to provide a comprehensive understanding on the raw materials, processing technologies, performance properties, and end uses of lightweight composites.
Download or read book Wicking in Porous Materials written by Reza Masoodi and published by CRC Press. This book was released on 2012-10-26 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive presentation of wicking models developed in academia and industry, Wicking in Porous Materials: Traditional and Modern Modeling Approaches contains some of the most important approaches and methods available, from the traditional Washburn-type models to the latest Lattice-Boltzmann approaches developed during the last few years. It provides a sound conceptual framework for learning the science behind different mathematical models while at the same time being aware of the practical issues of model validation as well as measurement of important properties and parameters associated with various models. Top experts in the field reveal the secrets of their wicking models. The chapters cover the following topics: Wetting and wettability Darcy’s law for single- and multi-phase flows Traditional capillary models, such as the Washburn-equation based approaches Unsaturated-flow based methodologies (Richard’s Equation) Sharp-front (plug-flow) type approaches using Darcy’s law Pore network models for wicking after including various micro-scale fluid-flow phenomena Studying the effect of evaporation on wicking using pore network models Fractal-based methods Modeling methods based on mixture theory Lattice-Boltzmann method for modeling wicking in small scales Modeling wicking in swelling and non-rigid porous media This extensive look at the modeling of porous media compares various methods and treats traditional topics as well as modern technologies. It emphasizes experimental validation of modeling approaches as well as experimental determination of model parameters. Matching models to particular media, the book provides guidance on what models to use and how to use them.
Download or read book Modelling of Flow and Transport in Fractal Porous Media written by Jianchao Cai and published by Elsevier. This book was released on 2020-11-05 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important resource explores recent theoretical advances and modelling on fluids transport in fractal porous systems and presents a systematic understanding of the characterization of complex microstructure and transport mechanism in fractal porous media. Modelling of Flow and Transport in Fractal Porous Media shows how fractal theory and technology, combined with other modern experiments and numerical simulation methods, will assist researchers and practitioners in modelling of transport properties of fractal porous media, such as fluid flow, heat and mass transfer, mechanical characteristics, and electrical conductivity. Presents the main methods and technologies for transport characterization of fractal porous media, including soils, reservoirs and artificial materials Provides the most recent theoretical advances in modelling of fractal porous media, including gas and vapor transport in fibrous materials, nonlinear seepage flow in hydrocarbon reservoirs, mass transfer of porous nanofibers, and fractal mechanics of unsaturated soils Includes multidisciplinary examples of applications of fractal theory to aid researchers and practitioners in characterizing various porous media structures
Download or read book Transport Phenomena in Food Processing First International Conference Proceedings written by Selcuk Guceri and published by CRC Press. This book was released on 1992-11-30 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in the Flow and Rheology of Non Newtonian Fluids written by D.A. Siginer and published by Elsevier. This book was released on 1999-05-07 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain chapters written by experts in such areas as bio and food rheology, polymer rheology, flow of suspensions, flow in porous media, electrorheological fluids, etc. Computational as well as analytical mathematical descriptions, involving appropriate constitutive equations deal with complex flow situations of industrial importance. This work is unique in that it brings together state of the art reviews and recent advances in a variety of areas, involving viscoelastic materials, in a desirable and timely manner.
Download or read book Process Modeling in Composites Manufacturing written by Suresh G. Advani and published by CRC Press. This book was released on 2002-08-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a wealth of literature on modeling and simulation of polymer composite manufacturing processes. However, existing books neglect to provide a systematic explanation of how to formulate and apply science-based models in polymer composite manufacturing processes. Process Modeling in Composites Manufacturing, Second Edition provides tangible methods to optimize this process — and it remains a proven, powerful introduction to the basic principles of fluid mechanics and heat transfer. Includes tools to develop an experience base to aid in modeling a composite manufacturing process Building on past developments, this new book updates the previous edition’s coverage of process physics and the state of modeling in the field. Exploring research derived from experience, intuition, and trial and error, the authors illustrate a state-of-the-art understanding of mass, momentum, and energy transfer during composites processing. They introduce computer-based solutions using MATLAB® code and flow simulation-based analysis, which complement closed-form solutions discussed in the book, to help readers understand the role of different material, geometric, and process parameters. This self-contained primer provides an introduction to modeling of composite manufacturing processes for anyone working in material science and engineering, industrial, mechanical, and chemical engineering. It introduces a scientific basis for manufacturing, using solved example problems which employ calculations provided in the book. End-of-chapter questions and problems and fill in the blanks sections reinforce the content in order to develop the experience base of the manufacturing, materials, and design engineer or scientists, as well as seniors and first-year graduate students.
Download or read book Paper Chemistry and Technology written by Monica Ek and published by Walter de Gruyter. This book was released on 2009 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The production of forestry products is based on a complex chain of knowledge in which the biological material wood with all its natural variability is converted into a variety of fiber-based products, each one with its detailed and specific quality requirements. This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. Supported by a grant from the Ljungberg Foundation, the Editors at the Royal Institute of Technology, Stockholm, Sweden coordinated over 30 authors from university and industry to create this comprehensive overview. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources."--Publisher's description.
Download or read book Scleroproteins Advances in Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scleroproteins: Advances in Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Scleroproteins. The editors have built Scleroproteins: Advances in Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Scleroproteins in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Scleroproteins: Advances in Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Network Materials written by Catalin R. Picu and published by Cambridge University Press. This book was released on 2022-07-31 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for entry-level and experienced researchers working in materials science and engineering, this unique book introduces a new subfield of materials science and mechanics of materials: network materials. A comprehensive review of their mechanical behaviours allows readers to understand, design, and enhance the performance of these material systems, across a range of materials including cytoskeletons, connective tissue, and thermoset polymers. By introducing simple models, supported by experimental data, the book provides the necessary fundamental knowledge to assist readers to design and develop their own material systems. By presenting each of these previously disparate material systems within a unified theoretical framework, this book provides a consolidated presentation of the mechanics of networks and their interactions, introducing parameters that define the stochastic structure of the network, and discussing their mechanical behaviour. It is an ideal text for those new to this fast-growing field, and for experienced researchers looking to consolidate their knowledge.
Download or read book Absorbent Technology written by P.K. Chatterjee and published by Elsevier. This book was released on 2002-03-20 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication discusses the theoretical aspects of absorbency as well as the structure, properties and performance of materials. The chapters are arranged in an approach for the reader to advance progressively through fundamental theories of absorbency to more practical aspects of the technology. Topics covered include scientific principles of absorbency and structure property relationships; material technology including super absorbents, non-woven, natural and synthetic fibres and surfactants; absorbency measurement techniques and technology perspective. The reader is provided with current status information on technology and is also informed on important developments within the field.
Download or read book Nanomaterials for Innovative Energy Systems and Devices written by Zishan H. Khan and published by Springer Nature. This book was released on 2022-05-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest research on applications of nanomaterials in the field of energy systems and devices. It provides an overview of the state-of-art research in this rapidly developing field. It discusses the design and fabrication of nanostructured materials and their energy applications. Various topics covered include nanomaterials for perovskite solar cells, transition metal dichalcogenides (TMDs) nanocomposites based supercapacitors, battery materials and technologies, major challenges toward development of efficient thermoelectric materials for energy efficient devices, extraction and experimentation of biodiesel produced from leachate oils of landfills coupled with nano-additives aluminium oxide and copper oxide on diesel engine and many more. It has contributions from world-renowned specialists in the fields of nanomaterials and energy devices. The book will be useful for students, researchers and professionals working in the area of nanomaterials and energy systems & devices.
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Mechanical Properties and Performance of Engineering Ceramics II Volume 27 Issue 2 written by Rajan Tandon and published by John Wiley & Sons. This book was released on 2009-09-29 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains over 70 papers on advanced research and development of processing, mechanical properties and mechanics of ceramics and composites from the proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, in Cocoa Beach, Florida. The conference was organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division. It covers underlying fundamental links between microstructure and properties, and the ability to achieve desired multifunctional properties through innovative processing techniques.
Download or read book 3 D Fibrous Assemblies written by Jinlian Hu and published by Elsevier. This book was released on 2008-09-09 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been important recent developments in the production and application of three dimensional fabrics. These 3D textile structures have great potential for new fabrics and textile applications. 3D fibrous assemblies summarises some key developments and their applications in the textile industry.The book begins with an introductory chapter which defines the concepts and types of 3D fibrous assemblies. The book then discusses how 3D fabrics can be applied in textile products. These range from composites and protective clothing to medical textiles. The remainder of the book reviews the two main 3D fabrics; multi-axial warp knitted fabrics and multi-layer woven fabrics. Themes such as structure, manufacture, properties and modelling are considered for both fabrics.Written by a distinguished author, 3D fibrous assemblies is a pioneering guide for a broad spectrum of readers, ranging from fibre scientists and designers through to those involved in research and development of new generation textile products. Presents exciting opportunities for the creation of new textiles through the use of three dimensional textile fibre assemblies A comprehensive account of the different types of 3D fabrics and their associated structure, properties, manufacture and modelling Examples of how three dimensional fibres can be applied in textile products