Download or read book Transparent Platinum Counter Electrode for Building Integrated Dye sensitized Solar Cells written by Anastasiia Iefanova and published by . This book was released on 2013 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transparent Pt Counter Electrode for Building Integrated DSSCs written by Anastasiia Iefanova and published by LAP Lambert Academic Publishing. This book was released on 2014-02 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new method for fabrication of highly transparent Pt counter electrodes (CE) has been developed based on spray deposition of Pt nanoparticles (Pt-NPs) on hot substrates. The platinum consumption hence the cost of the counter electrode was reduced over 86%, compared to conventional Pt counter electrode prepared by sputter deposition method. The prepared Pt-NP film led to 89% transparency and 80% transparency when integrated with indium tin oxide/glass substrate. DSSCs with Pt-NP counter electrode had 6.17% power conversion efficiency, comparable to the 6.46% efficiency of the corresponding reference opaque DSSC with sputtered Pt counter electrode.
Download or read book Counter Electrode for Dye Sensitized Solar Cells written by Alagarsamy Pandikumar and published by CRC Press. This book was released on 2021-06-24 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energies have become an attractive option to overcome the energy demands in sustainable and affordable ways. It has been estimated that one-third of the total renewable energies would be generated from photovoltaics (PVs). A solar or PV cell is a device that directly converts sunlight into electricity by taking benefit of the photoelectric effect. In the third-generation solar PVs, dye-sensitized solar cells (DSSCs) are believed to be the most promising and have attracted wide attention. The optimization of a DSSC is focused on four main components: (i) metal oxide semiconductor, (ii) photosensitizer, (iii) redox couple electrolyte, and (iv) counter electrode. Among these, the counter electrode undertakes three functions: (i) as a catalyst, (ii) as a positive electrode of primary cells, and (iii) as a mirror. To obey these functions, the electrode material should have high catalytic activity, high conductivity, high reflectivity, high surface area, and electrochemical and mechanical stability. To improve the performance of DSSCs, many scientists have developed new counter electrodes made of platinum, carbon materials, transition metals, conductive polymers, and composites. This book converses the various aspects of materials for the fabrication of counter electrodes especially for the DSSCs.
Download or read book Advanced Engineering Forum Vol 45 written by Dumitru Nedelcu and published by Trans Tech Publications Ltd. This book was released on 2022-04-04 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 45th volume of the journal "Advanced Engineering Forum" contains peer-reviewed papers that present the engineering solutions and research results in dye-sensitized solar cell, mechanical properties of welded rail joints and designing of morphing air wing with flexure hinge, construction mechanics, assessment of effectivity of two types of biofilters in a constructed wetland for the wastewater treatment. For readers will be interesting also the results of using the bio inhibiter for corrosion prevention, the conceptual design of the high-voltage transformer for scientific and industrial applications, results of cost-reduced optimisation of the hybrid renewable energy microgrid, and the design of cloud architecture for the cyber-manufacturing systems. The professionals, students, and scientific investigators working in the various engineering fields will find this volume of value.
Download or read book Counter Electrodes for Dye Sensitized and Perovskite Solar Cells 2 Vols written by Sining Yun and published by John Wiley & Sons. This book was released on 2019-01-04 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to one of the most important aspects for affordable and highly efficient dye-sensitized solar cells Dye-sensitized solar cells have the potential to be one of the most promising photovoltaic technologies for production of renewable and clean energy. Counter Electrodes for Dye-Sensitized and Perovskite Solar Cells offers an introduction to the various types of counter electrode catalysts for dye-sensitized solar cells and perovskite solar cells, including metal and metal compounds, carbon materials, polymers, and composites. With contributions from an international panel of experts, the book contains a discussion of the design and synthesis of the catalysts, characterization and stability of the devices, as well as calculations on properties. The contributors cover a wide range of topics including information on: carbon nanotubes electrocatalysts for I-mediated dye-sensitized solar cells; Pt-loaded composite electrocatalysts for I-mediated dye-sensitized solar cells; metal contact electrodes for perovskite solar cells; and much more. The book also includes insight into the future developments in the field. This important resource Covers the various types of counter electrode catalysts and presents design strategies, synthesis methods, theoretical calculation and stability evaluation Includes information on low-cost counter electrode catalysts and commercial applications of dye-sensitized sensitized solar cells Disscuses how electrode catalysts can be applied in a range of fields, such as solar cells, fuel cells, hydrogen production, and photocatalysis Offers contributions from leading experts in the field including Anders Hagfeldt, one of the world's leading researchers in this field Written for materials scientists, solid state chemists, electrochemists, catalytic chemists, solid state physicists, and chemical industry professionals, Counter Electrodes for Dye-Sensitized and Perovskite Solar Cells is a comprehensive and authoritative guide to dye-sensitized solar cells.
Download or read book Sulfide and Selenide Based Materials for Emerging Applications written by Goutam Kumar Dalapati and published by Elsevier. This book was released on 2022-06-17 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sulfide and Selenide-Based Materials for Emerging Applications explores a materials and device-based approach to the transition to low-cost sustainable thin film photovoltaic devices and energy storage systems. Part 1 examines recent advances in renewable technologies and materials for sustainable development, as well as photovoltaic energy storage devices. Part 2 discusses thin film solar cells with earth abundant materials, highlighting the power conversion efficiency of the kesterite-based solar cells. Kesterite film technology including different synthesis and doping method designs are also discussed, along with emerging sulfide semiconductors with potential in thin film photovoltaics/flexible devices. In Part 3 sulfur- and selenides-based materials for thermoelectric applications are explored. Part 4 covers chalcogenide semiconductors with applications in electrochemical water splitting for green hydrogen generation and oxygen generation, as well as the latest research on layered 2D transition metal chalcogenides for electrochemical water splitting. To conclude, part 5 discusses recent developments of storage technologies such as Li-S batteries, sulfide-based supercapacitors and metal-ion batteries, and the development of 3D printing sulfides/selenides for energy conversion and storage. This book is a useful resource for those involved in green energy technology and decarbonization and is designed for a broad audience, from students to experienced scientists. - Discusses the emerging sulfide/selenide based thin film absorber materials and their deposition methods - Previews device engineering techniques that have been developed to enhance the power conversion efficiency and lifetime of sulfide/selenide based thin film solar cells - Provides an update on what low cost sulfide/selenide based electro-catalysts have become available and the comparison of their performance vs. noble metal catalysts
Download or read book Building Integrated Photovoltaic Thermal Systems written by Basant Agrawal and published by Royal Society of Chemistry. This book was released on 2011 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes recent developments in PV technologies, the solar radiation available on the earth, various BIPVT systems and their applications, energy and exergy analysis, carbondioxide migration and credit earned, life cycle cost analysis and life cycle conversion efficiency.
Download or read book Size Effects of Platinum Nanoparticles on the Electrocatalytic Ability of the Counter Electrode in Dye sensitized Solar Cells written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Materials for Solar Cell Applications written by Katsuaki Tanabe and published by Mdpi AG. This book was released on 2022-01-31 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of nanomaterials in technologies for photovoltaic applications continues to represent an important area of research. There are numerous mechanisms by which the incorporation of nanomaterials can improve device performance. We invited authors to contribute articles covering the most recent progress and new developments in the design and utilization of nanomaterials for highly efficient, novel devices relevant to solar cell applications. This book covers a broad range of subjects, from nanomaterials synthesis to the design and characterization of photovoltaic devices and technologies with nanomaterial integration.
Download or read book Fundamentals of Solar Cell Design written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar cells are semiconductor devices that convert light photons into electricity in photovoltaic energy conversion and can help to overcome the global energy crisis. Solar cells have many applications including remote area power systems, earth-orbiting satellites, wristwatches, water pumping, photodetectors and remote radiotelephones. Solar cell technology is economically feasible for commercial-scale power generation. While commercial solar cells exhibit good performance and stability, still researchers are looking at many ways to improve the performance and cost of solar cells via modulating the fundamental properties of semiconductors. Solar cell technology is the key to a clean energy future. Solar cells directly harvest energy from the sun’s light radiation into electricity are in an ever-growing demand for future global energy production. Solar cell-based energy harvesting has attracted worldwide attention for their notable features, such as cheap renewable technology, scalable, lightweight, flexibility, versatility, no greenhouse gas emission, environment, and economy friendly and operational costs are quite low compared to other forms of power generation. Thus, solar cell technology is at the forefront of renewable energy technologies which are used in telecommunications, power plants, small devices to satellites. Aiming at large-scale implementation can be manipulated by various types used in solar cell design and exploration of new materials towards improving performance and reducing cost. Therefore, in-depth knowledge about solar cell design is fundamental for those who wish to apply this knowledge and understanding in industries and academics. This book provides a comprehensive overview on solar cells and explores the history to evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and so on. It also includes solar cells’ characterization analytical tools, theoretical modeling, practices to enhance conversion efficiencies, applications and patents.
Download or read book Rational Design of Solar Cells for Efficient Solar Energy Conversion written by Alagarsamy Pandikumar and published by John Wiley & Sons. This book was released on 2018-10-09 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interdisciplinary guide to the newest solar cell technology for efficient renewable energy Rational Design of Solar Cells for Efficient Solar Energy Conversion explores the development of the most recent solar technology and materials used to manufacture solar cells in order to achieve higher solar energy conversion efficiency. The text offers an interdisciplinary approach and combines information on dye-sensitized solar cells, organic solar cells, polymer solar cells, perovskite solar cells, and quantum dot solar cells. The text contains contributions from noted experts in the fields of chemistry, physics, materials science, and engineering. The authors review the development of components such as photoanodes, sensitizers, electrolytes, and photocathodes for high performance dye-sensitized solar cells. In addition, the text puts the focus on the design of material assemblies to achieve higher solar energy conversion. This important resource: Offers a comprehensive review of recent developments in solar cell technology Includes information on a variety of solar cell materials and devices, focusing on dye-sensitized solar cells Contains a thorough approach beginning with the fundamental material characterization and concluding with real-world device application. Presents content from researchers in multiple fields of study such as physicists, engineers, and material scientists Written for researchers, scientists, and engineers in university and industry laboratories, Rational Design of Solar Cells for Efficient Solar Energy Conversion offers a comprehensive review of the newest developments and applications of solar cells with contributions from a range of experts in various disciplines.
Download or read book Optoelectronics written by Sergei Pyshkin and published by BoD – Books on Demand. This book was released on 2015-10-07 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optoelectronics Materials and Devices follows the Optoelectronics Books II and III published in 2011 and 2013, as part of the InTech collection of international works on optoelectronics. Accordingly, as with the first two books of the collection, this book covers recent achievements by specialists around the world. The growing number of countries participating in this endeavor as well as joint participation of the US and Moldova scientists in this edition testifies to the unifying effect of science. An interested reader will find in the book the description of properties and applications employing organic and inorganic materials, as well as the methods of fabrication and analysis of operation and regions of application of modern optoelectronic devices.
Download or read book Dye Sensitized Solar Cells written by Masoud Soroush and published by Academic Press. This book was released on 2019-03-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dye-Sensitized Solar Cells: Mathematical Modelling and Materials Design and Optimization presents the latest information as edited from leaders in the field. It covers advances in DSSC design, fabrication and mathematical modelling and optimization, providing a comprehensive coverage of various DSSC advances that includes different system scales, from electronic to macroscopic level, and a consolidation of the results with fundamentals. The book is extremely useful as a monograph for graduate students and researchers, but is also a comprehensive, general reference on state-of-the-art techniques in modelling, optimization and design of DSSCs.
Download or read book Impedance Spectroscopy written by Evgenij Barsoukov and published by John Wiley & Sons. This book was released on 2018-03-22 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Essential Reference for the Field, Featuring Protocols, Analysis, Fundamentals, and the Latest Advances Impedance Spectroscopy: Theory, Experiment, and Applications provides a comprehensive reference for graduate students, researchers, and engineers working in electrochemistry, physical chemistry, and physics. Covering both fundamentals concepts and practical applications, this unique reference provides a level of understanding that allows immediate use of impedance spectroscopy methods. Step-by-step experiment protocols with analysis guidance lend immediate relevance to general principles, while extensive figures and equations aid in the understanding of complex concepts. Detailed discussion includes the best measurement methods and identifying sources of error, and theoretical considerations for modeling, equivalent circuits, and equations in the complex domain are provided for most subjects under investigation. Written by a team of expert contributors, this book provides a clear understanding of impedance spectroscopy in general as well as the essential skills needed to use it in specific applications. Extensively updated to reflect the field’s latest advances, this new Third Edition: Incorporates the latest research, and provides coverage of new areas in which impedance spectroscopy is gaining importance Discusses the application of impedance spectroscopy to viscoelastic rubbery materials and biological systems Explores impedance spectroscopy applications in electrochemistry, semiconductors, solid electrolytes, corrosion, solid state devices, and electrochemical power sources Examines both the theoretical and practical aspects, and discusses when impedance spectroscopy is and is not the appropriate solution to an analysis problem Researchers and engineers will find value in the immediate practicality, while students will appreciate the hands-on approach to impedance spectroscopy methods. Retaining the reputation it has gained over years as a primary reference, Impedance Spectroscopy: Theory, Experiment, and Applications once again present a comprehensive reference reflecting the current state of the field.
Download or read book Solar Cells written by Ahmed Mourtada Elseman and published by BoD – Books on Demand. This book was released on 2021-09-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar cell energy is the single most pressing issue facing humanity, with a more technologically advanced society requiring better energy resources. This book discusses technologies broadly, depending on how they capture and distribute solar energy or convert it into solar power. The major areas covered in this book are: • The theory of solar cells, which explains the conversion of light energy in photons into electric current. The theoretical studies are practical because they predict the fundamental limits of a solar cell. • The design and development of thin-film technology-based solar cells. • State of the art for bulk material applied for solar cells based on crystalline silicon (c-Si), also known as “solar grade silicon,” and emerging photovoltaics.
Download or read book Organic and Hybrid Solar Cells written by Lukas Schmidt-Mende and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-05-24 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing world-energy demand there is a growing necessity for clean and renewable energy. The sun being one of the most abundant potential sources accounts for less than 1% of the global energy supply. The market for solar cells is one of the most strongly increasing markets, even though the prize of conventional solar cells is still quite high. New emerging technologies, such as organic and hybrid solar cells have the potential to decrease the price of solar energy drastically. This book offers an introduction to these new types of solar cells and discusses fabrication, different architectures and their device physics on the bases of the author's teaching course on a master degree level. A comparison with conventional solar cells will be given and the specialties of organic solar cells emphasized.
Download or read book Nanostructured Solar Cells written by Guanying Chen and published by MDPI. This book was released on 2018-07-04 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Nanostructured Solar Cells" that was published in Nanomaterials
