Download or read book Transmission Lines in Digital Systems for EMC Practitioners written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2011-11-22 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a brief but comprehensive book covering the set of EMC skills that EMC practitioners today require in order to be successful in high-speed, digital electronics. The basic skills in the book are new and weren’t studied in most curricula some ten years ago. The rapidly changing digital technology has created this demand for a discussion of new analysis skills particularly for the analysis of transmission lines where the conductors that interconnect the electronic modules have become “electrically large,” longer than a tenth of a wavelength, which are increasingly becoming important. Crosstalk between the lines is also rapidly becoming a significant problem in getting modern electronic systems to work satisfactorily. Hence this text concentrates on the modeling of “electrically large” connection conductors where previously-used Kirchhoff’s voltage and current laws and lumped-circuit modeling have become obsolete because of the increasing speeds of modern digital systems. This has caused an increased emphasis on Signal Integrity. Until as recently as some ten years ago, digital system clock speeds and data rates were in the hundreds of megahertz (MHz) range. Prior to that time, the “lands” on printed circuit boards (PCBs) that interconnect the electronic modules had little or no impact on the proper functioning of those electronic circuits. Today, the clock and data speeds have moved into the low gigahertz (GHz) range.
Download or read book A Practical Guide to EMC Engineering written by Levent Sevgi and published by Artech House. This book was released on 2017-03-31 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical new resource explores the fundamentals of EMC engineering and examines the concepts and underpinnings of electromagnetics. This book highlights the procedures from design to market for both technical and non-technical issues, including market control, accreditation, calibration, EMC tests and measurement, and EMC protection. Basic electrical engineering theories, Maxwell equations, EM scattering, diffraction and propagation in the electromagnetic model are presented. The circuit model, including lumped parameter circuit elements, two-port circuit definitions, grounding, common and differential model currents, and microstripline circuits are explored. This book also covers antennas and antenna calibration, including communication antennas, normalized site attenuation (NSA), loop antennas, and loop antenna calibration (LAC). Noise and frequency analysis on fundamental electromagnetic signals, noise, and transforms is explained. Readers find insight into EMC test and measurement environments and devices. Time-saving MATLAB code is included in this resource to help engineers with their projects in the field.
Download or read book Analysis of Multiconductor Transmission Lines written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2007-10-26 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential textbook for electrical engineering students and professionals-now in a valuable new edition The increasing use of high-speed digital technology requires that all electrical engineers have a working knowledge of transmission lines. However, because of the introduction of computer engineering courses into already-crowded four-year undergraduate programs, the transmission line courses in many electrical engineering programs have been relegated to a senior technical elective, if offered at all. Now, Analysis of Multiconductor Transmission Lines, Second Edition has been significantly updated and reorganized to fill the need for a structured course on transmission lines in a senior undergraduate- or graduate-level electrical engineering program. In this new edition, each broad analysis topic, e.g., per-unit-length parameters, frequency-domain analysis, time-domain analysis, and incident field excitation, now has a chapter concerning two-conductor lines followed immediately by a chapter on MTLs for that topic. This enables instructors to emphasize two-conductor lines or MTLs or both. In addition to the reorganization of the material, this Second Edition now contains important advancements in analysis methods that have developed since the previous edition, such as methods for achieving signal integrity (SI) in high-speed digital interconnects, the finite-difference, time-domain (FDTD) solution methods, and the time-domain to frequency-domain transformation (TDFD) method. Furthermore, the content of Chapters 8 and 9 on digital signal propagation and signal integrity application has been considerably expanded upon to reflect all of the vital information current and future designers of high-speed digital systems need to know. Complete with an accompanying FTP site, appendices with descriptions of numerous FORTRAN computer codes that implement all the techniques in the text, and a brief but thorough tutorial on the SPICE/PSPICE circuit analysis program, Analysis of Multiconductor Transmission Lines, Second Edition is an indispensable textbook for students and a valuable resource for industry professionals.
Download or read book Transmission Lines in Digital and Analog Electronic Systems written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 30 years there have been dramatic changes in electrical technology--yet the length of the undergraduate curriculum has remained four years. Until some ten years ago, the analysis of transmission lines was a standard topic in the EE and CpE undergraduate curricula. Today most of the undergraduate curricula contain a rather brief study of the analysis of transmission lines in a one-semester junior-level course on electromagnetics. In some schools, this study of transmission lines is relegated to a senior technical elective or has disappeared from the curriculum altogether. This raises a serious problem in the preparation of EE and CpE undergraduates to be competent in the modern industrial world. For the reasons mentioned above, today's undergraduates lack the basic skills to design high-speed digital and high-frequency analog systems. It does little good to write sophisticated software if the hardware is unable to process the instructions. This problem will increase as the speeds and frequencies of these systems continue to increase seemingly without bound. This book is meant to repair that basic deficiency.
Download or read book Transient Signals on Transmission Lines written by Andrew Peterson and published by Springer Nature. This book was released on 2023-12-05 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to transmission line effects in the time domain. Fundamentals including time of flight, impedance discontinuities, proper termination schemes, nonlinear and reactive loads, and crosstalk are considered. Required prerequisite knowledge is limited to conventional circuit theory. The material is tutorial for electrical and computer engineers on the topic of transient signals on transmission lines. Emphasis has been placed on aspects of the subject that have application to signal integrity and high-speed digital circuit design issues, including proper termination schemes to avoid impedance discontinuities, reactive and nonlinear loads, and an introduction to crosstalk. The coverage focuses on the very important topic of transmission line transients which have been de-emphasized in most current textbooks. This book is prepared to supplement traditional texts for advanced students studying electromagnetics and for a vast array of practicing electrical engineers, computer engineers and material scientists with interests in signal integrity and high-speed digital design. In this second edition, examples and new problems have been added throughout. A new chapter on differential transmission lines has also been incorporated
Download or read book Transient Signals on Transmission Lines written by Andrew F. Peterson and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This lecture provides an introduction to transmission line effects in the time domain. Fundamentals including time of flight, impedance discontinuities, proper termination schemes, nonlinear and reactive loads, and crosstalk are considered. Required prerequisite knowledge is limited to conventional circuit theory. The material is intended to supplement standard textbooks for use with undergraduate students in electrical engineering or computer engineering. The contents should also be of value to practicing engineers with interests in signal integrity and high-speed digital design. Table of Contents: Introduction / Solution of the Transmission Line Equations / DC Signals on a Resistively Loaded Transmission Line / Termination Schemes / Equivalent Circuits, Cascaded Lines, and Fan-Outs / Initially-Charged Transmission Lines / Finite Duration Pulses on Transmission Lines / Transmission Lines with Reactive Terminations / Lines with Nonlinear Loads / Crosstalk on Weakly Coupled Transmission Lines
Download or read book Digital Signal Transmission written by Bryan Hart and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The coming of digital electronics has given rise to many textbook- outstanding among which are the authoritative works of Douglas Lewin- dealing, in the main, with the combinational and sequential logic aspects of system design. By comparison, the coverage of digital hardware has been meagre: in particular, books on logic circuit interconnections have been scarce in number. When circuits operated at relatively low speeds this did not cause major problems to engineers and students, but the increasing use of fast, and very fast, logic circuits employed extensively in modern digital systems has brought the requirement for properly-designed transmission paths between printed circuit boards, on the boards, and even in the integrated circuit packages themselves. turn, has necessitated a physical understanding of line pulse This, in behaviour, and an ability to design practically appropriate interconnection systems, by a far wider audience of engineers, scientists and students than has been the case hitherto. For many years the study of transmission lines was, primarily, the province of the telecommunications engineer sending high-frequency radio signals to antennas for radiation into space, and the power engineer working at low frequencies (50/60 Hz) but with corresponding wavelengths comparable with the relatively large distances involved in the supply of power from generating stations to remote users. The textbook treatment of lines was well established, but based mainly on the assumption of sinusoidal signals. This 'frequency-domain' approach is not best suited to the understanding of the transmission of digital signals.
Download or read book Transmission Lines for Communications written by C. W. Davidson and published by . This book was released on 1978 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of the fundamental theory for the transverse electromagnetic mode (TEM) on transmission lines, with emphasis on communications applications. The coverage includes transient performance of relevance for digital systems as well as the more traditional steady-state sinusoidal performance.
Download or read book Transmission Line Protection Using Digital Technology written by Vijay H. Makwana and published by Springer. This book was released on 2016-06-21 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops novel digital distance relaying schemes to eliminate the errors produced by the conventional digital distance relays while protecting power transmission lines against different types of faults. These include high resistance ground faults on single infeed transmission lines; high resistance ground faults on double infeed transmission lines; simultaneous open conductor and ground fault on double infeed transmission lines; inter-circuit faults on parallel transmission lines; simultaneous open conductor and ground fault on series compensated parallel transmission lines; inter-circuit faults on series compensated parallel transmission lines; and phase faults on series compensated double infeed transmission lines. This monograph also details suggestions for further work in the area of digital protection of transmission lines. The contents will be useful to academic as well as professional researchers working in transmission line protection.
Download or read book Power Line Communications written by Lutz Lampe and published by John Wiley & Sons. This book was released on 2016-04-14 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Power Line Communications will show some adjustments in content including new material on PLC for home and industry, PLC for multimedia, PLC for smart grid and PLC for vehicles. Additional chapters include coverage of Channel Characterization, Electromagnetic Compatibility, Coupling, and Digital Transmission Techniques. This book will provide the reader with a wide coverage of the major developments within the field. With contributions from some of the most active researchers on PLC, the book brings together a wealth of international experts on specific PLC topics.
Download or read book Electromagnetic and Circuit Modelling of Multiconductor Transmission Lines written by Niels Faché and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiconductor transmission lines form the basic building blocks of microwave and millimeter-wave integrated circuits, and are omnipresent in digital systems. This book gives a detailed account of the way in which self-consistent computer-aided-design circuit models for such coupled lines, carrying either TEM or hybrid modes, can be obtained from a full-wave solution of Maxwell's equations. Latest advances for lossy lines are covered. The book also details the full-wave integral equation solution for basic transmission structures on MMICs, PCBs, and multiwire and microwire boards with the method of moments. For thin coupled microstrips and striplines the proposed space domain solution offers an alternative to the classical spectral domain approach. This book is the first to handle the full-wave analysis of discrete wire structures and of lossy polygonal conductors. The book is sure to appeal to a wide range of electrical and electronics engineers.
Download or read book Signal Integrity and Radiated Emission of High Speed Digital Systems written by Spartaco Caniggia and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before putting digital systems for information technology or telecommunication applications on the market, an essential requirement is to perform tests in order to comply with the limits of radiated emission imposed by the standards. This book provides an investigation into signal integrity (SI) and electromagnetic interference (EMI) problems. Topics such as reflections, crosstalk, switching noise and radiated emission (RE) in high-speed digital systems are covered, which are essential for IT and telecoms applications. The highly important topic of modelling is covered which can reduce costs by enabling simulation data to demonstrate that a product meets design specifications and regulatory limits. According to the new European EMC directive, this can help to avoid the expensive use of large semi-anechoic chambers or open area test sites for radiated emission assessments. Following a short introduction to signalling and radiated interference in digital systems, the book provides a detailed characterization of logic families in terms of static and dynamic characteristic useful for modelling techniques. Crosstalk in multi-coupled line structures are investigated by analytical, graphical and circuit-based methods, and techniques to mitigate these phenomena are provided. Grounding, filtering and shielding with multilayer PCBs are also examined and design rules given. Written by authors with extensive experience in industry and academia. Explains basic conceptual problems from a theoretical and practical point of view by using numerous measurements and simulations. Presents models for mathematical and SPICE-like circuit simulators. Provides examples of using full-wave codes for SI and RE investigations. Companion website containing lists of codes and sample material. Signal Integrity and Radiated Emission of High-Speed Digital Systems is a valuable resource to industrial designers of information technology, telecommunication equipment and automation equipment as well as to development engineers. It will also be of interest to managers and designers of consumer electronics, and researchers in electronics.
Download or read book Analysis of Linear Circuits written by Clayton R. Paul and published by . This book was released on 1989 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmission Lines for Digital and Communication Networks written by Richard E. Matick and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmission Lines for Digital and Communication Networks written by Richard E. Matick and published by IEEE Computer Society Press. This book was released on 1995 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by United States. Superintendent of Documents and published by . This book was released on 1977 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: February issue includes Appendix entitled Directory of United States Government periodicals and subscription publications; September issue includes List of depository libraries; June and December issues include semiannual index
Download or read book Transmission Lines in Communication Systems Student Manual written by Lab-Volt (Quebec) Ltd and published by [Charlesbourg, Quebec] : Lab-Volt. This book was released on 2005-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
