Download or read book Transition Turbulence and Combustion Modelling written by A. Hanifi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This single-volume work gives an introduction to the fields of transition, turbulence, and combustion modeling of compressible flows and provides the physical background for today’s modeling approaches in these fields. It presents basic equations and discusses fundamental aspects of hydrodynamical instability.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Transition Turbulence and Combustion written by M.Y. Hussaini and published by Springer. This book was released on 1994 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes are concerned with current technologically important issues of transition, turbulence and combustion. Topics covered in transition include linear and nonlinear stability, direct and large-eddy simulation and phenomenological modelling of the transition zone. In turbulence, interest was focused on second-order closures and the formulation of near-wall corrections to existing high Reynolds number models, and closure model development based on turbulent flow structures and RNG theory. Topics covered in combustion include counterflow diffusion flames, development of novel mixing enhancement techniques for non-premixed combustion, and methods of modelling the interaction between turbulence and chemical kinetics. This collection of papers from leading researchers represents as yet unpublished state-of-the-art research, resulting in a very valuable tool for scientists and students working in areas of turbulence, transition and combustion.
Download or read book Transition Turbulence and Combustion written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain the proceedings of the Workshop on Transition, Turbulence and Combustion, sponsored by the Insti tute for Computer Applications in Science and Engineering (ICASE) and the NASA Langley Research Center (LaRC), during June 7 to July 2, 1993. Volume I contains the contributions from the transi tion research, and Volume II contains the contributions from both the turbulence and combustion research. This is the third workshop in the series on the subject. The first was held in 1989, the second in 1991, and their proceedings were published by Springer-Verlag under the titles "Instability and Transition" (edited by M. Y. Hussaini and R. G. Voigt) and "Instability, Transition and Turbulence" (edited by M. Y. Hussaini, A. Kumar and C. L. Streett) respectively. The objectives of these workshops are to expose the academic community to current technologically important issues of transition, turbulence and combustion, and to acquaint the academic commu nity with the unique combination of theoretical, computational and experimental capabilities at LaRC. It is hoped these will foster con tinued interactions, and accelerate progress in elucidating the funda mental phenomena of transition, turbulence and combustion. The research areas of interest in transition covered the full range of the subject: linear and nonlinear stability, direct and large-eddy simulation and phenomenological modeling of the transition zone.
Download or read book Transition Turbulence and Combustion written by M.Y. Hussaini and published by Springer. This book was released on 2014-01-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain the proceedings of the Workshop on Transition, Turbulence and Combustion, sponsored by the Insti tute for Computer Applications in Science and Engineering (ICASE) and the NASA Langley Research Center (LaRC), during June 7 to July 2, 1993. Volume I contains the contributions from the transi tion research, and Volume II contains the contributions from both the turbulence and combustion research. This is the third workshop in the series on the subject. The first was held in 1989, the second in 1991, and their proceedings were published by Springer-Verlag under the titles "Instability and Transition" (edited by M. Y. H ussaini and R. G. Voigt) and "Instability, Transition and Turbulence" (edited by M. Y. Hussaini, A. Kumar and C. L. Streett) respectively. The objectives of these workshops are to expose the academic community to current technologically important issues of transition, turbulence and combustion, and to acquaint the academic COllllllU nity with the unique combination of theoretical, computational and experimental capabilities at LaRC. It is hoped these will foster con tinued interactions, and accelerate progress in elucidating the funda mental phenomena of transition, turbulence and combustion. The research areas of interest in transition covered the full range of the subject: linear and nonlinear stability, direct and large-eddy simulation and phenomenological modeling of the transition zone.
Download or read book Transition Turbulence and Combustion written by M.Y. Hussaini and published by Springer. This book was released on 1994-09-30 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes are concerned with current technologically important issues of transition, turbulence and combustion. Topics covered in transition include linear and nonlinear stability, direct and large-eddy simulation and phenomenological modelling of the transition zone. In turbulence, interest was focused on second-order closures and the formulation of near-wall corrections to existing high Reynolds number models, and closure model development based on turbulent flow structures and RNG theory. Topics covered in combustion include counterflow diffusion flames, development of novel mixing enhancement techniques for non-premixed combustion, and methods of modelling the interaction between turbulence and chemical kinetics. This collection of papers from leading researchers represents as yet unpublished state-of-the-art research, resulting in a very valuable tool for scientists and students working in areas of turbulence, transition and combustion.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book Transition Turbulence and Combustion written by M.Y. Hussaini and published by Springer. This book was released on 1994-09-30 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain the proceedings of the Workshop on Transition, Turbulence and Combustion, sponsored by the Insti tute for Computer Applications in Science and Engineering (ICASE) and the NASA Langley Research Center (LaRC), during June 7 to July 2, 1993. Volume I contains the contributions from the transi tion research, and Volume II contains the contributions from both the turbulence and combustion research. This is the third workshop in the series on the subject. The first was held in 1989, the second in 1991, and their proceedings were published by Springer-Verlag under the titles "Instability and Transition" (edited by M. Y. Hussaini and R. G. Voigt) and "Instability, Transition and Turbulence" (edited by M. Y. Hussaini, A. Kumar and C. L. Streett) respectively. The objectives of these workshops are to expose the academic community to current technologically important issues of transition, turbulence and combustion, and to acquaint the academic commu nity with the unique combination of theoretical, computational and experimental capabilities at LaRC. It is hoped these will foster con tinued interactions, and accelerate progress in elucidating the funda mental phenomena of transition, turbulence and combustion. The research areas of interest in transition covered the full range of the subject: linear and nonlinear stability, direct and large-eddy simulation and phenomenological modeling of the transition zone.
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier. This book was released on 2005-05-05 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements). The proceedings include papers dealing with the following areas of turbulence: · Eddy-viscosity and second-order RANS models · Direct and large-eddy simulations and deductions for conventional modelling · Measurement and visualization techniques, experimental studies · Turbulence control · Transition and effects of curvature, rotation and buoyancy on turbulence · Aero-acoustics · Heat and mass transfer and chemically reacting flows · Compressible flows, shock phenomena · Two-phase flows · Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer. This book was released on 2011-04-09 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Fundamentals Of Turbulence Modelling written by Ching Jen Chen and published by CRC Press. This book was released on 1997-12-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the second-order turbulence-closure model and its applications to engineering problems. Topics include turbulent motion and the averaging process, near-wall turbulence, applications of turbulence models, and turbulent buoyant flows.
Download or read book Turbulence Modelling Approaches written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate prediction of turbulent flows remains a challenging task despite considerable work in this area and the acceptance of CFD as a design tool. The quality of the CFD calculations of the flows in engineering applications strongly depends on the proper prediction of turbulence phenomena. Investigations of flow instability, heat transfer, skin friction, secondary flows, flow separation, and reattachment effects demand a reliable modelling and simulation of the turbulence, reliable methods, accurate programming, and robust working practices. The current scientific status of simulation of turbulent flows as well as some advances in computational techniques and practical applications of turbulence research is reviewed and considered in the book.
Download or read book Turbulence and Transition Modelling written by M. Hallbäck and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to give, within a single volume, an introduction to the fields of turbulence modelling and transition-to-turbulence prediction, and to provide the physical background for today's modelling approaches in these problem areas as well as giving a flavour of advanced use of prediction methods. Turbulence modelling approaches, ranging from single-point models based on the eddy-viscosity concept and the Reynolds stress transport equations (Chapters 3,4,5), to large-eddy simulation (LES) techniques (Ch. 7), are covered. The foundations of hydrodynamical stability and transition are presented (Ch. 2) along with transition prediction methods based on single-point closures (Ch. 6), LES techniques (Ch. 7) and the parabolized stability equations (Ch. 8). The book addresses engineers and researchers, in industry or academia, who are entering into the fields of turbulence or transition modelling research or need to apply turbulence or transition prediction methods in their work.
Download or read book Engineering Turbulence Modelling and Experiments 4 written by D. Laurence and published by Elsevier. This book was released on 1999-04-14 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.
Download or read book Boundary Layer Flows written by Vallampati Ramachandra Prasad and published by BoD – Books on Demand. This book was released on 2020-01-22 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts in the field, this book, "Boundary Layer Flows - Theory, Applications, and Numerical Methods" provides readers with the opportunity to explore its theoretical and experimental studies and their importance to the nonlinear theory of boundary layer flows, the theory of heat and mass transfer, and the dynamics of fluid. With the theory's importance for a wide variety of applications, applied mathematicians, scientists, and engineers - especially those in fluid dynamics - along with engineers of aeronautics, will undoubtedly welcome this authoritative, up-to-date book.
