Download or read book Comprehensive Coordination Chemistry II written by J. A. McCleverty and published by Newnes. This book was released on 2003-12-03 with total page 11845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Coordination Chemistry II (CCC II) is the sequel to what has become a classic in the field, Comprehensive Coordination Chemistry, published in 1987. CCC II builds on the first and surveys new developments authoritatively in over 200 newly comissioned chapters, with an emphasis on current trends in biology, materials science and other areas of contemporary scientific interest.

Download or read book How Tobacco Smoke Causes Disease written by United States. Public Health Service. Office of the Surgeon General and published by . This book was released on 2010 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report considers the biological and behavioral mechanisms that may underlie the pathogenicity of tobacco smoke. Many Surgeon General's reports have considered research findings on mechanisms in assessing the biological plausibility of associations observed in epidemiologic studies. Mechanisms of disease are important because they may provide plausibility, which is one of the guideline criteria for assessing evidence on causation. This report specifically reviews the evidence on the potential mechanisms by which smoking causes diseases and considers whether a mechanism is likely to be operative in the production of human disease by tobacco smoke. This evidence is relevant to understanding how smoking causes disease, to identifying those who may be particularly susceptible, and to assessing the potential risks of tobacco products.

Download or read book Coal Tar Creosote written by C. Melber and published by WHO. This book was released on 2004 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: On cover: IPCS International Programme on Chemical Safety. Published under the joint sponsorship of the United Nations Environment Programme, the International Labour Organization and the World Health Organization, and produced within the framework of the Inter-organization Programme for the Sound Management of Chemicals (IOMC)

Download or read book Early Main Group Metal Catalysis written by Sjoerd Harder and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early Main Group Metal Catalysis gives a comprehensive overview of catalytic reactions in the presence of group 1 and group 2 metals. Chapters are ordered to reaction type, contain educational elements and deal with concepts illustrated by examples that cover the main developments. After a short introduction on polar organometallic chemistry and synthesis of early main group metal complexes, a variety of catalytic reactions are described, e.g. polymerization of alkenes, hydroamination and phosphination reactions, hydrosilylation, hydroboration and hydrogenation catalysis, as well as enantioselective and Lewis-acid catalysis. The book addresses organic chemists and researchers in industry interested in the state-of-the-art and new possibilities of early main group metal catalysis as well as newcomers to the field. Written by a team of leaders in the field, it is a very welcome addition to the area of main group metal chemistry, and to the field of catalysis.

Download or read book The Group 13 Metals Aluminium Gallium Indium and Thallium written by Simon Aldridge and published by John Wiley & Sons. This book was released on 2011-02-10 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last two decades have seen a renaissance in interest in the chemistry of the main group elements. In particular research on the metals of group 13 (aluminium, gallium, indium and thallium) has led to the synthesis and isolation of some very novel and unusual molecules, with implications for organometallic synthesis, new materials development, and with biological, medical and, environmental relevance. The Group 13 Metals Aluminium, Gallium, Indium and Thallium aims to cover new facts, developments and applications in the context of more general patterns of physical and chemical behaviour. Particular attention is paid to the main growth areas, including the chemistry of lower formal oxidation states, cluster chemistry, the investigation of solid oxides and hydroxides, advances in the formation of III-V and related compounds, the biological significance of Group 13 metal complexes, and the growing importance of the metals and their compounds in the mediation of organic reactions. Chapters cover: general features of the group 13 elements group 13 metals in the +3 oxidation state: simple inorganic compounds formal oxidation state +3: organometallic chemistry formal oxidation state +2: metal-metal bonded vs. mononuclear derivatives group 13 metals in the +1 oxidation state mixed or intermediate valence group 13 metal compounds aluminium and gallium clusters: metalloid clusters and their relation to the bulk phases, to naked clusters, and to nanoscaled materials simple and mixed metal oxides and hydroxides: solids with extended structures of different dimensionalities and porosities coordination and solution chemistry of the metals: biological, medical and, environmental relevance III-V and related semiconductor materials group 13 metal-mediated organic reactions The Group 13 Metals Aluminium, Gallium, Indium and Thallium provides a detailed, wide-ranging, and up-to-date review of the chemistry of this important group of metals. It will find a place on the bookshelves of practitioners, researchers and students working in inorganic, organometallic, and materials chemistry.

Download or read book Olefin Polymerization written by Walter Kaminsky and published by Wiley-VCH. This book was released on 2006-08-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an enormous velocity, olefin polymerization has expanded to one of the most significant fields in polymers since the first industrial use about 50 years ago. In 2005, 100 million tons of polyolefins were produced - the biggest part was catalyzed by metallorganic compounds. The Hamburg Macromolecular Symposium 2005 with the title "Olefin Polymerization" involved topics such as new catalysts and cocatalysts, kinetics, mechanism and polymer reaction engineering, synthesis of special polymers, and characterization of polyolefins. The conference combined scientists from different disciplines to discuss latest research results of polymers and to offer each other the possibility of cooperation. This is reflected in this volume, which contains invited lectures and selected posters presented at the symposium.

Download or read book Metal Amide Chemistry written by Michael Lappert and published by John Wiley & Sons. This book was released on 2008-12-23 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by internationally recognised leaders in the field, Metal Amide Chemistry is the authoritative survey of this important class of compounds, the first since Lappert and Power’s 1980 book “Metal and Metalloid Amides.” An introduction to the topic is followed by in-depth discussions of the amide compounds of: alkali metals alkaline earth metals zinc, cadmium and mercury the transition metals group 3 and lanthanide metals group 13 metals silicon and the group 14 metals group 15 metals the actinide metals Accompanied by a substantial bibliography, this is an essential guide for researchers and advanced students in academia and research working in synthetic organometallic, organic and inorganic chemistry, materials chemistry and catalysis.

Download or read book Superelectrophiles and Their Chemistry written by George A. Olah and published by John Wiley & Sons. This book was released on 2008-01-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superelectrophiles and Their Chemistry contains, for the first-time, a discussion of the basics of this emerging field of organic chemistry, alongside tools to help the reader apply the chemistry. Specific tools include an evaluation of the ways to increase the strength of electrophiles, the classification of superelectrophiles, the solvation issues, a review of methods for studying superelectrophilicity, with details of the superelectrophiles that have been identified and studied. Additional information includes substituent effects in activation of superelectrophiles, and solvation in chemical reactions, as well as an insightful look into future applications.

Download or read book Superbases for Organic Synthesis written by Tsutomu Ishikawa and published by John Wiley & Sons. This book was released on 2009-01-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guanidines, amidines and phosphazenes have been attracting attention in organic synthesis due to their potential functionality resulting from their extremely strong basicity. They are also promising catalysts because of their potential for easy molecular modification, possible recyclability, and reduced or zero toxicity. Importantly, these molecules can be derived as natural products – valuable as scientists move towards “sustainable chemistry”, where reagents and catalysts are derived from biomaterial sources. Superbases for Organic Synthesis is an essential guide to these important molecules for preparative organic synthesis. Topics covered include the following aspects: an introduction to organosuperbases physicochemical properties of organic superbases amidines and guanidines in organic synthesis phosphazene: preparation, reaction and catalytic role polymer-supported organosuperbases application of organosuperbases to total synthesis related organocatalysts: proton sponges and urea derivatives amidines and guanidines in natural products and medicines Superbases for Organic Synthesis is a comprehensive, authoritative and up-to-date guide to these important reagents for organic chemists, drug discovery researchers and those interested in the chemistry of natural products.

Download or read book Organometallic Compounds of Low Coordinate Si Ge Sn and Pb written by Vladimir Ya. Lee and published by John Wiley & Sons. This book was released on 2011-07-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently the low-coordinate compounds of the heavier elements of group 14 were known only as transient, unstable species which were difficult to isolate. However recent developments have led to the stabilisation of these compounds and today heavier group 14 element cations, radicals, anions, carbene analogues, alkene and alkyne analogues and aromatics have all been prepared as highly reactive, stable, fully characterizable and readily available organometallic reagents. Organometallic Compounds of Low-Coordinate Si, Ge, Sn and Pb describes the chemistry of this exciting new class of organometallics, with an emphasis on their major similarities and differences with the analogous species in organic chemistry. Topics covered include include the synthesis, structure, reactions and synthetic applications of : Si-, Ge-, Sn and Pb-centered cations, radicals and anions heavy analogues of carbenes: silylenes, germylenes, stannylenes and plumbylenes heavy analogues of alkenes: disilenes, digermenes, distannenes, diplumbenes heavy analogues of alkynes: disilynes, digermynes, distannynes, diplumbynes, and their valence isomers heteronuclear derivatives: silenes, germenes, stannenes, silagermenes, silastannenes, germastannenes heavy analogues of alkenes of the type: >E14=E13-, >E14=E15-, >E14=E16 [where E13, E14, E15 and E16 are elements of the groups 13, 14, 15 and 16] cyclic compounds (three-, four-, five-, and six-membered rings) heavy analogues of 1,3-dienes, allenes and other cumulenes heavy analogues of aromatic compounds; including a comparison between organometallic and organic aromaticity Organometallic Compounds of Low-Coordinate Si, Ge, Sn and Pb is an essential guide to this emerging class of organometallic reagents for researchers and students in main group, organometallic, synthetic and silicon chemistry

Download or read book The Chemistry of Metal Organic Frameworks written by Stefan Kaskel and published by John Wiley & Sons. This book was released on 2016-06-14 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing vital knowledge on the design and synthesis of specific metal-organic framework (MOF) classes as well as their properties, this ready reference summarizes the state of the art in chemistry. Divided into four parts, the first begins with a basic introduction to typical cluster units or coordination geometries and provides examples of recent and advanced MOF structures and applications typical for the respective class. Part II covers recent progress in linker chemistries, while special MOF classes and morphology design are described in Part III. The fourth part deals with advanced characterization techniques, such as NMR, in situ studies, and modelling. A final unique feature is the inclusion of data sheets of commercially available MOFs in the appendix, enabling experts and newcomers to the field to select the appropriate MOF for a desired application. A must-have reference for chemists, materials scientists, and engineers in academia and industry working in the field of catalysis, gas and water purification, energy storage, separation, and sensors.

Download or read book Outdoor Air Pollution written by IARC Working Group on the Evaluation of Carcinogenic Risks to Humans and published by IARC Monographs on the Evaluat. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This publication represents the views and expert opinions of an IARC Working Group on the Evaluation of Carcinogenic Risk to Humans, which met in Lyon, 8-15 October 2013."

Download or read book From Chemical Topology to Three Dimensional Geometry written by Alexandru T. Balaban and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even high-speed supercomputers cannot easily convert traditional two-dimensional databases from chemical topology into the three-dimensional ones demanded by today's chemists, particularly those working in drug design. This fascinating volume resolves this problem by positing mathematical and topological models which greatly expand the capabilities of chemical graph theory. The authors examine QSAR and molecular similarity studies, the relationship between the sequence of amino acids and the less familiar secondary and tertiary protein structures, and new topological methods.

Download or read book Hazardous Pollutants in Biological Treatment Systems written by Ferhan Çeçen and published by IWA Publishing. This book was released on 2017-11-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazardous pollutants are a growing concern in treatment engineering. In the past, biological treatment was mainly used for the removal of bulk organic matter and the nutrients nitrogen and phosphorous. However, relatively recently the issue of hazardous pollutants, which are present at very low concentrations in wastewaters and waters but are very harmful to both ecosystems and humans, is becoming increasingly important. Today, treatment of hazardous pollutants in the water environment becomes a challenge as the water quality standards become stricter. Hazardous Pollutants in Biological Treatment Systems focuses entirely on hazardous pollutants in biological treatment and gives an elaborate insight into their fate and effects during biological treatment of wastewater and water. Currently, in commercial and industrial products and processes, thousands of chemicals are used that reach water. Many of those chemicals are carcinogens, mutagens, endocrine disruptors and toxicants. Therefore, water containing hazardous pollutants should be treated before discharged to the environment or consumed by humans. This book first addresses the characteristics, occurrence and origin of hazardous organic and inorganic pollutants. Then, it concentrates on the fate and effects of these pollutants in biological wastewater and drinking water treatment units. It also provides details about analysis of hazardous pollutants, experimental methodologies, computational tools used to assist experiments, evaluation of experimental data and examination of microbial ecology by molecular microbiology and genetic tools. Hazardous Pollutants in Biological Treatment Systems is an essential resource to the researcher or the practitioner who is already involved with hazardous pollutants and biological processes or intending to do so. The text will also be useful for professionals working in the field of water and wastewater treatment.

Download or read book Molecular Metal Metal Bonds written by Stephen T. Liddle and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically covering all the latest developments in the field, this is a comprehensive and handy introduction to metal-metal bonding. The chapters follow a uniform, coherent structure for a clear overview, allowing readers easy access to the information. The text covers such topics as synthesis, properties, structures, notable features, reactivity and examples of applications of the most important compounds in each group with metal-metal bonding throughout the periodic table. With its general remarks at the beginning of each chapter, this is a must-have reference for all molecular inorganic chemists, including PhD students and postdocs, as well as more experienced researchers.

Download or read book Clusters Contemporary Insight in Structure and Bonding written by Stefanie Dehnen and published by Springer. This book was released on 2017-03-23 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical structure and bonding. The scope of the series spans the entire Periodic Table and addresses structure and bonding issues associated with all of the elements. It also focuses attention on new and developing areas of modern structural and theoretical chemistry such as nanostructures, molecular electronics, designed molecular solids, surfaces, metal clusters and supramolecular structures. Physical and spectroscopic techniques used to determine, examine and model structures fall within the purview of Structure and Bonding to the extent that the focus is on the scientific results obtained and not on specialist information concerning the techniques themselves. Issues associated with the development of bonding models and generalizations that illuminate the reactivity pathways and rates of chemical processes are also relevant. The individual volumes in the series are thematic. The goal of each volume is to give the reader, whether at a university or in industry, a comprehensive overview of an area where new insights are emerging that are of interest to a larger scientific audience.

Download or read book Innovative and Integrated Technologies for the Treatment of Industrial Wastewater written by Antonio Lopez and published by IWA Publishing. This book was released on 2011-12-15 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative and Integrated Technologies for the Treatment of Industrial Wastewater deals with advanced technological solutions for the treatment of industrial wastewater such as aerobic granular biomass based systems, advanced oxidation processes integrated with biological treatments, membrane contactors and membrane chemical reactors. Wastewater from pharmaceutical, chemical and food industries as well as landfill leachates are specifically considered as representative of major problems encountered when treating industrial streams. The economic and environmental sustainability of the above solutions are also reported in the book and compared with the alternatives currently available in the market by life cycle assessment (LCA) and life cycle costing (LCC) methodologies. The implementation of the considered solutions at large scale could support and enhance the competitiveness of different industrial sectors, including the water technology sector, in the global market. Innovative and Integrated Technologies for the Treatment of Industrial Wastewater also makes a contribution towards defining: new concepts, processes and technologies in wastewater treatment with potential benefits for the stable quality of effluents, energy and operational costs saving, and the protection of the environment new sets of advanced standards for wastewater treatment new methodologies for the definition of wastewater treatment needs and framework conditions new information supporting development and implementation of water legislation.