Download or read book Transient Temperature in Engineering and Science written by Bryan Lawton and published by Oxford University Press on Demand. This book was released on 1996 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive account of the principles and practical methods applicable to transient temperature measurements in engineering and science. Transient temperatures are taken to be in the range from about 200K to 6000K and with timescales from tenths of nanoseconds to tens ofseconds. Within these limits is a very large field of combustion and gas dynamics and these are the principle areas which are addressed. Several new experimental and theoretical techniques are introduced and various modes of thermal failure are described.The chapters move from undergraduate material to the latest methods and are designed to be of use to the widest possible range of engineers, scientists, and students working in universities or in chemical or mechanical engineering. Many applications are described.
Download or read book Transient Temperatures in Engineering and Science written by and published by . This book was released on 1996 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Climate Change Science written by National Research Council and published by National Academies Press. This book was released on 2001-06-28 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: The warming of the Earth has been the subject of intense debate and concern for many scientists, policy-makers, and citizens for at least the past decade. Climate Change Science: An Analysis of Some Key Questions, a new report by a committee of the National Research Council, characterizes the global warming trend over the last 100 years, and examines what may be in store for the 21st century and the extent to which warming may be attributable to human activity.
Download or read book Transient Temperatures Near a Stationary Contact written by J. A. Greenwood and published by . This book was released on 1991 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transient Conjugate Heat Transfer During Temperature Destratification in Enclosures written by Yoshihisa Fujii and published by . This book was released on 1991 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TID written by and published by . This book was released on 1957 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer written by Yunus A. Çengel and published by . This book was released on 2003 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains: the limited academic version of Engineering equation solver(EES) with homework problems.
Download or read book Transient Temperature Distribution Within Thermal Sensing Elements written by John A. Clark and published by . This book was released on 1967 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a criterion by which to judge the acceptability of the premise of instantaneous spatially uniform temperatures within a temperature sensing element during thermal transients, and subsequent use of a simplified analysis to determine the dynamic error in measurement. Errors inherent in temperature measuring elements immersed in fluid streams are discussed for both steady-state and transient temperature conditions. Errors in steady-state conditions are due to calibration error, irregularities in signal transmission, mechanical malfunction on instrumentation, and thermal effects owing to the exchange of heat between the measuring element and its environment. These may generally be reduced to an acceptable minimum by proper design and installation. An additional source of error which must be considered in transient temperature conditions is the 'thermal lag' which results from the fact that any physical system immersed in a fluid of changing temperature does not respond with time nor amplitude as does the fluid itself. (Author).
Download or read book The Art of Measuring in the Thermal Sciences written by Josua Meyer and published by CRC Press. This book was released on 2020-11-05 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of Measuring in the Thermal Sciences provides an original state-of-the-art guide to scholars who are conducting thermal experiments in both academia and industry. Applications include energy generation, transport, manufacturing, mining, processes, HVAC&R, etc. This book presents original insights into advanced measurement techniques and systems, explores the fundamentals, and focuses on the analysis and design of thermal systems. Discusses the advanced measurement techniques now used in thermal systems Links measurement techniques to concepts in thermal science and engineering Draws upon the original work of current researchers and experts in thermal-fluid measurement Includes coverage of new technologies, such as micro-level heat transfer measurements Covers the main types of instrumentation and software used in thermal-fluid measurements This book offers engineers, researchers, and graduate students an overview of the best practices for conducting sound measurements in the thermal sciences.
Download or read book Transient Temperature Distribution in Electrically Heated Solids written by Martin D. Andonian and published by . This book was released on 1951 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactor Heat Transfer Conference of 1956 written by U.S. Atomic Energy Commission and published by . This book was released on 1957 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Physics of High Temperature Materials written by Nirmal K. Sinha and published by John Wiley & Sons. This book was released on 2022-02-15 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: ENGINEERING PHYSICS OF HIGH-TEMPERATURE MATERIALS Discover a comprehensive exploration of high temperature materials written by leading materials scientists In Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics distinguished researchers and authors Nirmal K. Sinha and Shoma Sinha deliver a rigorous and wide-ranging discussion of the behavior of different materials at high temperatures. The book discusses a variety of physical phenomena, from plate tectonics and polar sea ice to ice-age and intraglacial depression and the postglacial rebound of Earth’s crust, stress relaxation at high temperatures, and microstructure and crack-enhanced Elasto Delayed Elastic Viscous (EDEV) models. At a very high level, Engineering Physics of High-Temperature Materials (EPHTM) takes a multidisciplinary view of the behavior of materials at temperatures close to their melting point. The volume particularly focuses on a powerful model called the Elasto-Delayed-Elastic-Viscous (EDEV) model that can be used to study a variety of inorganic materials ranging from snow and ice, metals, including complex gas-turbine engine materials, as well as natural rocks and earth formations (tectonic processes). It demonstrates how knowledge gained in one field of study can have a strong impact on other fields. Engineering Physics of High-Temperature Materials will be of interest to a broad range of specialists, including earth scientists, volcanologists, cryospheric and interdisciplinary climate scientists, and solid-earth geophysicists. The book demonstrates that apparently dissimilar polycrystalline materials, including metals, alloys, ice, rocks, ceramics, and glassy materials, all behave in a surprisingly similar way at high temperatures. This similarity makes the information contained in the book valuable to all manner of physical scientists. Readers will also benefit from the inclusion of: A thorough introduction to the importance of a unified model of high temperature material behavior, including high temperature deformation and the strength of materials An exploration of the nature of crystalline substances for engineering applications, including basic materials classification, solid state materials, and general physical principles Discussions of forensic physical materialogy and test techniques and test systems Examinations of creep fundamentals, including rheology and rheological terminology, and phenomenological creep failure models Perfect for materials scientists, metallurgists, and glaciologists, Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics will also earn a place in the libraries of specialists in the nuclear, chemical, and aerospace industries with an interest in the physics and engineering of high-temperature materials.
Download or read book Transients for Electrical Engineers written by Paul J. Nahin and published by Springer. This book was released on 2018-07-05 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a concise introduction to the analysis of electrical transients aimed at students who have completed introductory circuits and freshman calculus courses. While it is written under the assumption that these students are encountering transient electrical circuits for the first time, the mathematical and physical theory is not ‘watered-down.’ That is, the analysis of both lumped and continuous (transmission line) parameter circuits is performed with the use of differential equations (both ordinary and partial) in the time domain, and the Laplace transform. The transform is fully developed in the book for readers who are not assumed to have seen it before. The use of singular time functions (unit step and impulse) is addressed and illustrated through detailed examples. The appearance of paradoxical circuit situations, often ignored in many textbooks (because they are, perhaps, considered ‘difficult’ to explain) is fully embraced as an opportunity to challenge students. In addition, historical commentary is included throughout the book, to combat the misconception that the material in engineering textbooks was found engraved on Biblical stones, rather than painstakingly discovered by people of genius who often went down many wrong paths before finding the right one. MATLAB® is used throughout the book, with simple codes to quickly and easily generate transient response curves.
Download or read book Solutions to Problems in Heat Transfer Transient Conduction Or Unsteady Conduction written by Osama Mohammed Elmardi and published by Anchor Academic Publishing. This book was released on 2017-03 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many heat transfer problems are time dependent. Such unsteady or transient problems typically arise when the boundary conditions of a system are changed. For example, if the surface temperature of a system is altered, the temperature at each point in the system will also begin to change. The changes will continue to occur until a steady state temperature distribution is reached. Consider a hot metal billet that is removed from a furnace and exposed to a cool air stream. Energy is transferred by convection and radiation from its surface to the surroundings. Energy transfer by conduction also occurs from the interior of the metal to the surface, and the temperature at each point in the billet decreases until a steady state condition is reached. The final properties of the metal will depend significantly on the time – temperature history that results from heat transfer. Controlling the heat transfer is one key to fabricating new materials with enhanced properties. The author’s objective in this textbook is to develop procedures for determining the time dependence of the temperature distribution within a solid during a transient process, as well as for determining heat transfer between the solid and its surroundings. The nature of the procedure depends on assumptions that may be made for the process. If, for example, temperature gradients within the solid may be neglected, a comparatively simple approach, termed the lumped capacitance method or negligible internal resistance theory, may be used to determine the variation of temperature with time. The entire book has been thoroughly revised and a large number of solved examples and additional unsolved problems have been added. This book contains comprehensive treatment of the subject matter in simple and direct language. The book comprises eight chapters. All chapters are saturated with much needed text supported and by simple and self-explanatory examples.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Climate Engineering and the Law written by Michael B. Gerrard and published by Cambridge University Press. This book was released on 2018-04-12 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to focus on the legal aspects of climate engineering, making recommendations for future laws and governance.
