Download or read book Transient Heat Flow Across Unidirectional Fibers in Composites written by Lit S. Han and published by . This book was released on 1983 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transient heat flow in fibrous composites is important in determining the depth of heat penetration and temperature gradients near surface layers. A pervious report dealt with heat flow parallel to the fiber axis. This research is concerned with heat flow perpendicular to the uni-directional fibers. Temperature responses under the condition of a constant surface heat load are calculated by a finite-difference approach. The rise of the composite surface temperature is governed by two bounding-limits (the effective bound and the matrix bound) depending on the time scale. A threshold time criterion is established in this research which is based on a heat penetration concept.
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Transient Heat Flow Along Uni directional Fibers in Composites written by and published by . This book was released on 1982 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: For uni-directional fibrous composites and laminated composites, a heat-balance integral method has been developed for the analysis of transient heat flow along the fibers or in the plane of laminates. The method is based on the construction of, for the two constituent media, temperature profiles which not only satisfy the necessary boundary conditions but also fulfill the asymptotic error function properties when inter-region conduction is vanishingly small or at very early times of the heat transient.
Download or read book Transient Heat Flow Across Unidirectional Fibers in Composites written by Lit S. Han and published by . This book was released on 1983 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transient heat flow in fibrous composites is important in determining the depth of heat penetration and temperature gradients near surface layers. A pervious report dealt with heat flow parallel to the fiber axis. This research is concerned with heat flow perpendicular to the uni-directional fibers. Temperature responses under the condition of a constant surface heat load are calculated by a finite-difference approach. The rise of the composite surface temperature is governed by two bounding-limits (the effective bound and the matrix bound) depending on the time scale. A threshold time criterion is established in this research which is based on a heat penetration concept.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer written by Vyacheslav Vikhrenko and published by BoD – Books on Demand. This book was released on 2011-12-22 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer is involved in numerous industrial technologies. This interdisciplinary book comprises 16 chapters dealing with combined action of heat transfer and concomitant processes. Five chapters of its first section discuss heat effects due to laser, ion and plasma-solid interaction. In eight chapters of the second section engineering applications of heat conduction equations to the curing reaction kinetics in manufacturing process, their combination with mass transport or ohmic and dielectric losses, heat conduction in metallic porous media and power cables are considered. Analysis of the safety of mine hoist under influence of heat produced by mechanical friction, heat transfer in boilers and internal combustion engine chambers, management for ultrahigh strength steel manufacturing are described in this section as well. Three chapters of the last third section are devoted to air cooling of electronic devices.
Download or read book Metal Matrix Composites written by Minoru Taya and published by Elsevier. This book was released on 2016-01-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites: Thermomechanical Behavior discusses metal matrix composites, elaborating on that consists of two phases—fiber as reinforcement and metal as matrix. This book focuses on polymer matrix composites, including topics in metal matrix composites ranging from processing to fracture mechanics. The three basic types of composite materials—dispersion-strengthened, particle-reinforced, and fiber (whisker)-reinforced, are also described in detail. Dispersion-strengthened is characterized by a microstructure consisting of an elemental matrix within which fine particles are uniformly dispersed, while particle-reinforced is indicated by dispersed particles of greater than 1.0 μm diameter with a volume fraction of 5 to 40%. Fiber (whisker)-reinforced provides a distinguishing microstructural feature of fiber-reinforced materials, such as that the reinforcing fiber has one long dimension, while the reinforcing particles of the other two types do not. This publication serves as a reference data book to students and researchers aiming to acquire knowledge of the thermomechanical behavior of metal matrix composites.
Download or read book Transient Heat Flow Along Uni directional Fibers in Composites written by Lit S. Han and published by . This book was released on 1982 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: For uni-directional fibrous composites and laminated composites, a heat-balance integral method has been developed for the analysis of transient heat flow along the fibers or in the plane of laminates. The method is based on the construction of, for the two constituent media, temperature profiles which not only satisfy the necessary boundary conditions but also fulfill the asymptotic error function properties when inter-region conduction is vanishingly small or at very early times of the heat transient.
Download or read book Thermoplastic Aromatic Polymer Composites written by Frederic Neil Cogswell and published by Elsevier. This book was released on 2013-10-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Aromatic Polymer Composites: A Study of the Structure, Processing and Properties of Carbon Fibre Reinforced Polyetheretherketone and Related Materials deals with the field of thermoplastic composite materials through a study of carbon fiber reinforced polyetheretherketone. The book is composed of twelve chapters. The first four chapters are an introduction and basic learning of thermoplastic composite materials. These chapters include discussions on the components of thermoplastics, product forms, and the microstructure of aromatic polymer composites. The processing and manufacturing technology, including the fundamental operations, control, and the wide implications of manufacturing the composite material, are analyzed. The service performance structure of three interactions, namely, material, design, and processing, are illustrated. The strength of thermoplastic composites is then considered through an analysis of both shear and extensions with elastic modulus, but in the case of material strength, the differences between tension and compression properties should be taken into account. The book also notes that the durability, temperature sensitivity, and environmental resistance should likewise be regarded for a structural composite to have practical value and satisfactory performance. Lastly, the text explains that the numerous applications of thermoplastic structural composites, such as in medicine, aviation, marine and space technology, automotive, and industrial machinery, are all important and a rigorous evaluation is therefore necessary. The book finally suggests that the research into the future developments in the thermoplastic structural composites and the trend toward new design strategies and processing technology are important in optimizing the composite's great potential. Industrial researchers in the field of chemistry and polymer composites, students, and academicians interested in the design and application of polymer composites will find this book relevant.
Download or read book ECCM Research Topic on Advanced Manufacturing of Composites written by Veronique Michaud and published by Frontiers Media SA. This book was released on 2023-10-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Space Station Systems written by and published by . This book was released on 1987 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of Adhesively Bonded Joints written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2008-10-14 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lot of recent developments have been made about adhesively bonded joints modeling using various methods of analysis. The increasing application of adhesives in industry is partly due to the increased sophistication and reliability of adhesive joints modeling. The book proposed intends to provide the designer with the most advanced stress analyses techniques in adhesive joints to reinforce the use of this promising bonding technique.
Download or read book Transport Phenomena in Food Processing First International Conference Proceedings written by Selcuk Guceri and published by CRC Press. This book was released on 1992-11-30 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Society for Composites written by Michael Hyer and published by DEStech Publications, Inc. This book was released on 2011-06-28 with total page 2760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management Recycling and Reuse of Waste Composites written by Vannessa Goodship and published by Elsevier. This book was released on 2009-12-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composites. These are issues which are of increasing importance due to the growing use of composites in many industries, increasingly strict legislation and concerns about disposal of composites by landfill or incineration.Part one discusses the management of waste composites and includes an introduction to composites recycling and a chapter on EU legislation for recycling waste composites. Part two reviews thermal technologies for recycling waste composites with chapters on pyrolysis, catalytic transformation, thermal treatments for energy recovery and fluidized bed pyrolysis. Part three covers mechanical methods of recycling waste composites. This section includes chapters on additives for recycled plastic composites, improving mechanical recycling and the quality and durability of mechanically recycled composites. Parts four discusses improving sustainable manufacture of composites, with chapters on environmentally-friendly filament winding of FRP composites, process monitoring and new developments in producing more functional and sustainable composites. Part five gives a review of case studies including end-of-life wind turbine blades, aerospace composites, marine composites, composites in construction and the recycling of concrete.With its distinguished editor and international team of contributors, Management, recycling and reuse of waste composites is a standard reference for anyone involved in the disposal or recycling of waste composites. - Reviews the increasingly important issues of recycling and reuse as a result of the increased use of composites - Discusses the management of waste composites and EU legislation with regards to recycling - Examines methods for recycling, including thermal technologies and mechanical methods
