Download or read book Transient Electro Thermal Modeling of Bipolar Power Semiconductor Devices written by Tanya Kirilova Gachovska and published by Morgan & Claypool Publishers. This book was released on 2013-11-01 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents physics-based electro-thermal models of bipolar power semiconductor devices including their packages, and describes their implementation in MATLAB and Simulink. It is a continuation of our first book Modeling of Bipolar Power Semiconductor Devices. The device electrical models are developed by subdividing the devices into different regions and the operations in each region, along with the interactions at the interfaces, are analyzed using the basic semiconductor physics equations that govern device behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as junction voltages and carrier distribution in different regions of the device, can be obtained using the models. The instantaneous dissipated power, calculated using the electrical device models, serves as input to the thermal model (RC network with constant and nonconstant thermal resistance and thermal heat capacity, or Fourier thermal model) of the entire module or package, which computes the junction temperature of the device. Once an updated junction temperature is calculated, the temperature-dependent semiconductor material parameters are re-calculated and used with the device electrical model in the next time-step of the simulation. The physics-based electro-thermal models can be used for optimizing device and package design and also for validating extracted parameters of the devices. The thermal model can be used alone for monitoring the junction temperature of a power semiconductor device, and the resulting simulation results used as an indicator of the health and reliability of the semiconductor power device.
Download or read book Transient Electro Thermal Modeling on Power Semiconductor Devices written by Tanya Kirilova Gachovska and published by Springer Nature. This book was released on 2022-06-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents physics-based electro-thermal models of bipolar power semiconductor devices including their packages, and describes their implementation in MATLAB and Simulink. It is a continuation of our first book Modeling of Bipolar Power Semiconductor Devices. The device electrical models are developed by subdividing the devices into different regions and the operations in each region, along with the interactions at the interfaces, are analyzed using the basic semiconductor physics equations that govern device behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as junction voltages and carrier distribution in different regions of the device, can be obtained using the models. The instantaneous dissipated power, calculated using the electrical device models, serves as input to the thermal model (RC network with constant and nonconstant thermal resistance and thermal heat capacity, or Fourier thermal model) of the entire module or package, which computes the junction temperature of the device. Once an updated junction temperature is calculated, the temperature-dependent semiconductor material parameters are re-calculated and used with the device electrical model in the next time-step of the simulation. The physics-based electro-thermal models can be used for optimizing device and package design and also for validating extracted parameters of the devices. The thermal model can be used alone for monitoring the junction temperature of a power semiconductor device, and the resulting simulation results used as an indicator of the health and reliability of the semiconductor power device.
Download or read book Transient Electro thermal Modeling on Power Semiconductor Devices written by Bin Du (Electrical engineer) and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Bipolar Power Semiconductor Devices written by Tanya K. Gachovska and published by Morgan & Claypool Publishers. This book was released on 2013-03 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents physics-based models of bipolar power semiconductor devices and their implementation in MATLAB and Simulink. The devices are subdivided into different regions, and the operation in each region, along with the interactions at the interfaces which are analyzed using basic semiconductor physics equations that govern their behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as the junction voltages and the carrier distribution in different regions of the device, can be obtained using the models.
Download or read book Modeling Bipolar Power Semiconductor Devices written by Tanya K. Gachovska and published by Springer Nature. This book was released on 2022-05-31 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents physics-based models of bipolar power semiconductor devices and their implementation in MATLAB and Simulink. The devices are subdivided into different regions, and the operation in each region, along with the interactions at the interfaces which are analyzed using basic semiconductor physics equations that govern their behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as the junction voltages and the carrier distribution in different regions of the device, can be obtained using the models.
Download or read book Digital Control in Power Electronics written by Simone Buso and published by Morgan & Claypool Publishers. This book was released on 2015-05-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, a selection of power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is primarily focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the test case because, besides being simple and well known, it allows the discussion of a significant spectrum of the most frequently encountered digital control applications in power electronics, from digital pulse width modulation (DPWM) and space vector modulation (SVM), to inverter output current and voltage control, ending with the relatively more complex VSI applications related to the so called smart-grid scenario. This book aims to serve two purposes: (1) to give a basic, introductory knowledge of the digital control techniques applied to power converters; and (2) to raise the interest for discrete time control theory, stimulating new developments in its application to switching power converters.
Download or read book Power Electronics for Photovoltaic Power Systems written by Mahinda Vilathgamuwa and published by Morgan & Claypool Publishers. This book was released on 2015-08-01 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world energy demand has been increasing in a rapid manner with the increase of population and rising standard of living. The world population has nearly doubled in the last 40 years from 3.7 billion people to the present 7 billion people. It is anticipated that world population will grow towards 8 billion around 2030. Furthermore, the conventional fossil fuel supplies become unsustainable as the energy demand in emerging big economies such as China and India would rise tremendously where the China will increase its energy demand by 75% and India by 100% in the next 25 years. With dwindling natural resources, many countries throughout the world have increasingly invested in renewable resources such as photovoltaics (PV) and wind. The world has seen immense growth in global photovoltaic power generation over the last few decades. For example, in Australia, renewable resources represented nearly 15% of total power generation in 2013. Among renewable resources, solar and wind account for 38% of generation. In near future, energy in the domestic and industrial sector will become ""ubiquitous"" where consumers would have multiple sources to get their energy. Another such prediction is that co-location of solar and electrical storage will see a rapid growth in global domestic and industrial sectors; conventional power companies, which dominate the electricity market, will face increasing challenges in maintaining their incumbent business models. The efficiency, reliability and cost-effectiveness of the power converters used to interface PV panels to the mains grid and other types of off-grid loads are of major concern in the process of system design. This book describes state-of-the-art power electronic converter topologies used in various PV power conversion schemes. This book aims to provide a reader with a wide variety of topologies applied in different circumstances so that the reader would be able to make an educated choice for a given application.
Download or read book Computer Techniques for Dynamic Modeling of DC DC Power Converters written by Farzin Asadi and published by Springer Nature. This book was released on 2022-06-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers play an important role in the analyzing and designing of modern DC-DC power converters. This book shows how the widely used analysis techniques of averaging and linearization can be applied to DC-DC converters with the aid of computers. Obtained dynamical equations may then be used for control design. The book is composed of two chapters. Chapter 1 focuses on the extraction of control-to-output transfer function. A second-order converter (a buck converter) and a fourth-order converter (a Zeta converter) are studied as illustrative examples in this chapter. Both ready-to-use software packages, such as PLECS® and MATLAB® programming, are used throught this chapter. The input/output characteristics of DC-DC converters are the object of considerations in Chapter 2. Calculation of input/output impedance is done with the aid of MATLAB® programming in this chapter. The buck, buck-boost, and boost converter are the most popular types of DC-DC converters and used as illustrative examples in this chapter. This book can be a good reference for researchers involved in DC-DC converters dynamics and control.
Download or read book Dynamics and Control of DC DC Converters written by Farzin Asadi and published by Springer Nature. This book was released on 2022-05-31 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC-DC converters have many applications in the modern world. They provide the required power to the communication backbones, they are used in digital devices like laptops and cell phones, and they have widespread applications in electric cars, to just name a few. DC-DC converters require negative feedback to provide a suitable output voltage or current for the load. Obtaining a stable output voltage or current in presence of disturbances such as: input voltage changes and/or output load changes seems impossible without some form of control. This book tries to train the art of controller design for DC-DC converters. Chapter 1 introduces the DC-DC converters briefly. It is assumed that the reader has the basic knowledge of DC-DC converter (i.e., a basic course in power electronics). The reader learns the disadvantages of open loop control in Chapter 2. Simulation of DC-DC converters with the aid of Simulink® is discussed in this chapter as well. Extracting the dynamic models of DC-DC converters is studied in Chapter 3. We show how MATLAB® and a software named KUCA can be used to do the cumbersome and error-prone process of modeling automatically. Obtaining the transfer functions using PSIM® is studied as well. These days, softwares are an integral part of engineering sciences. Control engineering is not an exception by any means. Keeping this in mind, we design the controllers using MATLAB® in Chapter 4. Finally, references are provided at the end of each chapter to suggest more information for an interested reader. The intended audiencies for this book are practice engineers and academians.
Download or read book Transient one dimensional numerical analysis of bipolar power semiconductor devices written by C. Christiaan Abbas and published by . This book was released on 1984 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Learning for Solar Array Monitoring Optimization and Control written by Sunil Rao and published by Springer Nature. This book was released on 2022-06-01 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficiency of solar energy farms requires detailed analytics and information on each panel regarding voltage, current, temperature, and irradiance. Monitoring utility-scale solar arrays was shown to minimize the cost of maintenance and help optimize the performance of the photo-voltaic arrays under various conditions. We describe a project that includes development of machine learning and signal processing algorithms along with a solar array testbed for the purpose of PV monitoring and control. The 18kW PV array testbed consists of 104 panels fitted with smart monitoring devices. Each of these devices embeds sensors, wireless transceivers, and relays that enable continuous monitoring, fault detection, and real-time connection topology changes. The facility enables networked data exchanges via the use of wireless data sharing with servers, fusion and control centers, and mobile devices. We develop machine learning and neural network algorithms for fault classification. In addition, we use weather camera data for cloud movement prediction using kernel regression techniques which serves as the input that guides topology reconfiguration. Camera and satellite sensing of skyline features as well as parameter sensing at each panel provides information for fault detection and power output optimization using topology reconfiguration achieved using programmable actuators (relays) in the SMDs. More specifically, a custom neural network algorithm guides the selection among four standardized topologies. Accuracy in fault detection is demonstrate at the level of 90+% and topology optimization provides increase in power by as much as 16% under shading.
Download or read book Robust Control of DC DC Converters written by Farzin Asadi and published by Springer Nature. This book was released on 2022-05-31 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC-DC converters require negative feedback to provide a suitable output voltage or current for the load. Obtaining a stable output voltage or current in the presence of disturbances like input voltage changes and/or output load changes seems impossible without some form of control. This book shows how simple controllers such as Proportional-Integral (PI) can turn into a robust controller by correct selection of its parameters. Kharitonov's theorem is an important tool toward this end. This book consist of two parts. The first part shows how one can obtain the interval plant model of a DC-DC converter. The second part introduces the Kharitonov's theorem. Kharitonov's theorem is an analysis tool rather than a design tool. Some case studies show how it can be used as a design tool. The prerequisite for reading this book is a first course on feedback control theory and power electronics.
Download or read book Transient One dimensional Numerical Analysis of Bipolar Power Semiconductor Devices written by C. C. Abbas and published by . This book was released on 1984 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Electrical Systems written by Faouzi Derbel and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electrical Systems are an indespensable feature of the exploitation and diagnostics of elecrical machines and energy resources. The Volume presents extended and peer reviewed papers from the international conference on PES in Barcelona, 2014. Among the topics dealt with are: electrical machines design, voltage and control, automotive power drives, electromagnetic compatibility, monitoring and diagnostics, renewable energy systems. The International Conference on Power Electrical Systems (PES) is a forum for researchers and specialists in different fields of electrical engineering related to Hybrid Renewable Energy Systems (HRES); Power Electronics in Renewable Energy Systems; Topologies and Control of Power Electronics Converters Used in Renewable Energy Systems; Electric machines modelling and control; Automotive electrical systems; Electric machine design; Monitoring and diagnostics; Special machines; Power systems; Power electronic converters; Renewable energy systems; Variable speed drives; Electromagnetic compatibility; Variable speed generating systems; Transformers.
Download or read book Insulated Gate Bipolar Transistor IGBT Theory and Design written by Vinod Kumar Khanna and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and "state-of-the-art" coverage of the design and fabrication of IGBT. All-in-one resource Explains the fundamentals of MOS and bipolar physics. Covers IGBT operation, device and process design, power modules, and new IGBT structures.
Download or read book Advances in Microelectronics Reviews Vol 2 written by Sergey Yurish and published by Lulu.com. This book was released on 2019-08-06 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd volume of 'Advances in Microelectronics: Reviews' Book Series is written by 57 contributors from academy and industry from 11 countries (Bulgaria, Hungary, Iran, Japan, Malaysia, Romania, Russia, Slovak Republic, Spain, Ukraine and USA). The book contains 13 chapters from different areas of microelectronics: MEMS, materials characterization, and various microelectronic devices. With unique combination of information in each volume, the Book Series will be of value for scientists and engineers in industry and at universities. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
Download or read book Theory and Practice of Thermal Transient Testing of Electronic Components written by Marta Rencz and published by Springer Nature. This book was released on 2023-01-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the significant aspects of thermal transient testing, the most important method of thermal characterization of electronics available today. The book presents the theoretical background of creating structure functions from the measured results with mathematical details. It then shows how the method can be used for thermal qualification, structure integrity testing, determining material parameters, and calibrating simulation models. General practical questions about measurements are discussed to help beginners carry out thermal transient testing. The particular problems and tricks of measuring with various electronic components, such as Si diodes, bipolar transistors, MOS transistors, IGBT devices, resistors, capacitors, wide bandgap materials, and LEDs, are covered in detail with the help of various use cases. This hands-on book will enable readers to accomplish thermal transient testing on any new type of electronics and provides the theoretical details needed to understand the opportunities and limitations offered by the methodology. The book will be an invaluable reference for practicing engineers, students, and researchers.