Download or read book Transient Coupled Conduction and Radiation Heat Transfer Through Ceiling Fiberglass Gypsum Board Composite written by JA. Roux and published by . This book was released on 1990 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: The heat transfer phenomenon in a fiberglass insulation and gypsum board (sheetrock) composite was investigated numerically. Heat transfer through the fiberglass insulation was taken to occur by coupled conduction and volumetric radiation. The fiberglass insulation was considered as a radiatively absorbing, emitting, and scattering medium. Heat transfer within the gypsum board was taken to be by conduction only. Measured (transient) temperatures at the top of the fiberglass insulation and on the bottom of the gypsum board were used as boundary condition information in obtaining a numerical solution. These temperatures were measured in a residential attic for summer and winter climatic conditions. For purposes of minimizing heat loss in winter and heat gain in summer, two different configurations of fiberglass insulation were studied. One configuration was a standard R-19 [15 cm (6 in.) thick] fiberglass batt; the other configuration was a standard R-19 fiberglass batt with a foil radiant barrier installed on top of the insulation. It was found that the batt with the foil radiant barrier reduced the heat gain in summer by about 45% and reduced the heat loss in winter by about 13%.
Download or read book Insulation Materials Testing and Applications written by D. L. McElroy and published by ASTM International. This book was released on 1990 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the symposium held in Bal Harbour, Florida, December 1987. Rising energy prices have been encouraging work on the use of thermal insulation to conserve energy. Here, more than 50 papers discuss new materials, assessments and properties of foams, loose-fill behavior, system performance
Download or read book Effective Thermal Insulation written by Amjad Almusaed and published by BoD – Books on Demand. This book was released on 2012-03-14 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written to present elementary practical and efficient applications in saving energy concept, as well as propose a solitary action for this category of topics. The book aims to illustrate various methods in treatment the concept of thermal insulation such as processes and the attempt to build an efficient passive building model.
Download or read book Heat transfer written by Yunus Ali Cengel and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Heat Transfer written by Warren M. Rohsenow and published by McGraw-Hill Companies. This book was released on 1973 with total page 1552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Insulating Materials written by Margit Pfundstein and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Bedeutung von Dämmstoffen ist ungebrochen hoch. Das Angebot steigt kontinuierlich. Durch ihre wärmedämmende Wirkung tragen sie zur Einsparung von Heiz- und Kühlenergie sowie zur Reduktion des CO2-Austoßes bei. Detail Practice Insulating Materials bietet einen umfassenden Katalog von Dämmstoffen für den Hochbau. Erläuterungen zu den einzelnen Dämmstoffarten geben Aufschluss über enthaltene Rohstoffe, typische Eigenschaften, Anwendungsbereiche und Lieferformen. Tabellen mit physikalischen Kennwerten und Angaben zum Brandverhalten sowie Hinweise zur Gesundheits- und Umweltverträglichkeit machen die Dämmstoffe vergleichbar. Ein Überblick über die europäischen Rechtsvorschriften sowie Dämmstoffnormen mit Erläuterungen zur Produktkennzeichnung und -zertifizierung hilft bei der Planung und Ausschreibung. Für die Auswahl des passenden Dämmstoffes werden Kriterien für Konstruktion und Anwendung vorgestellt. Ergänzend hierzu eröffnet die differenzierte Betrachtung der ökologischen Wirkungen von Dämmstoffen ein großes Optimierungspotenzial für ihren nachhaltigen Einsatz.
Download or read book Fundamentals of Heat and Mass Transfer written by T. L. Bergman and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 2249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat and Mass Transfer, 7th Edition is the gold standard of heat transfer pedagogy for more than 30 years, with a commitment to continuous improvement by four authors having more than 150 years of combined experience in heat transfer education, research and practice. Using a rigorous and systematic problem-solving methodology pioneered by this text, it is abundantly filled with examples and problems that reveal the richness and beauty of the discipline. This edition maintains its foundation in the four central learning objectives for students and also makes heat and mass transfer more approachable with an additional emphasis on the fundamental concepts, as well as highlighting the relevance of those ideas with exciting applications to the most critical issues of today and the coming decades: energy and the environment. An updated version of Interactive Heat Transfer (IHT) software makes it even easier to efficiently and accurately solve problems.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book PCM Enhanced Building Components written by Jan Kośny and published by Springer. This book was released on 2015-05-07 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting an overview of the use of Phase Change Materials (PCMs) within buildings, this book discusses the performance of PCM-enhanced building envelopes. It reviews the most common PCMs suitable for building applications, and discusses PCM encapsulation and packaging methods. In addition to this, it examines a range of PCM-enhanced building products in the process of development as well as examples of whole-building-scale field demonstrations. Further chapters discuss experimental and theoretical analyses (including available software) to determine dynamic thermal and energy performance characteristics of building enclosure components containing PCMs, and present different laboratory and field testing methods. Finally, a wide range of PCM building products are presented which are commercially available worldwide. This book is intended for students and researchers of mechanical, architectural and civil engineering and postgraduate students of energy analysis, dynamic design of building structures, and dynamic testing procedures. It also provides a useful resource for professionals involved in architectural and mechanical-civil engineering design, thermal testing and PCM manufacturing.
Download or read book Fundamentals of Heat and Mass Transfer written by Theodore L. Bergman and published by John Wiley & Sons. This book was released on 2012-02-01 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This bestselling book in the field provides a complete introduction to the physical origins of heat and mass transfer. Noted for its crystal clear presentation and easy-to-follow problem solving methodology, Incropera and Dewitt's systematic approach to the first law develops reader confidence in using this essential tool for thermal analysis. Readers will learn the meaning of the terminology and physical principles of heat transfer as well as how to use requisite inputs for computing heat transfer rates and/or material temperatures.
Download or read book Introduction to Thermodynamics and Heat Transfer written by Yunus A. Cengel and published by McGraw-Hill Higher Education. This book was released on 2009-02 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides balanced coverage of the basic concepts of thermodynamics and heat transfer. Together with the illustrations, student-friendly writing style, and accessible math, this is an ideal text for an introductory thermal science course for non-mechanical engineering majors.
Download or read book Heat Transfer Tools written by Robert J. Ribando and published by . This book was released on 2002 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer Tools with CD-ROM is the first resource to effectively link project-based learning to introductory Heat Transfer courses. This effective software package offers multiple projects developed to provide students with a new dimension in exploring design and working with open-ended problems.The CD-ROM, included with the text, offers assorted project work in a combination of spreadsheet formats, Visual Basic executables, Windows help files and Fortran .dll files. The interface is intuitive, providing graphics and boxes for inputting math information for each project, and leading students to a better understanding of major equations.Features:· Students gain experience using the computer to explore designs and solve open-ended problems.· The CD-ROM does not require any advanced systems resources -- it will work on any Windows machine with basic memory resources (64K) and a graphics card· Modern, research-based numerical algorithms function behind the scenes in most of the nine "canned" modules. Thorough write-ups of most of these algorithms are included as "pdf" files on the CD-ROM.· Modern custom user interfaces coupled with extensive use of graphical displays allow users to test parameters and to visualize and understand the underlying physics. This software was created solely for instruction use! The modules are NOT stripped-down versions of a professional Computational Fluid Dynamics (CFD) package. With no extraneous inputs and outputs, these modules have virtually no learning curve. "Learning the software" is learning the heat transfer!· In addition to the nine Visual Basic/Fortran modules, six projects intended for implementation by students are provided.· A separate appendix on the CD-ROM teaches students everything they need to know about Visual Basic for Applications (VBA), the extremely powerful and flexible programming language incorporated into Excel.· Instructors can use these modules as lecture aids in a classroom equipped with a projection system or as the nucleus of a "hands-on" approach to heat transfer instruction in a computer classroom.· All the "canned" modules can be verified for at least some parameters by comparison with traditional analytical solutions or experimental data. Verification of results is stressed throughout.· Introduces students to Computational Fluid Dynamics (CFD) by application to simple, fundamental problems. In contrast many practicing engineers are introduced to CFD only through two- or three-day short courses provided by vendors.· Several of these modules have been under development for up to 15 years. Nearly all Visual Basic modules have been classroom-tested at the undergraduate level five times and at the graduate level twice. They have been debugged and enhanced extensively during that time.
Download or read book Differential Equations for Engineers and Scientists written by Yunus A. Çengel and published by McGraw-Hill Europe. This book was released on 2013 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential Equations for Engineers and Scientists is intended to be used in a first course on differential equations taken by science and engineering students. It covers the standard topics on differential equations with a wealth of applications drawn from engineering and science--with more engineering-specific examples than any other similar text. The text is the outcome of the lecture notes developed by the authors over the years in teaching differential equations to engineering students.
Download or read book Progress in Exergy Energy and the Environment written by Ibrahim Dincer and published by Springer. This book was released on 2014-06-17 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thorough and highly relevant volume examines exergy, energy and the environment in the context of energy systems and applications and as a potential tool for design, analysis, optimization. It further considers their role in minimizing and/or eliminating environmental impacts and providing for sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Natural Fibers Plastics and Composites written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Thermal Systems Engineering written by Michael J. Moran and published by John Wiley & Sons. This book was released on 2002-09-17 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This survey of thermal systems engineering combines coverage of thermodynamics, fluid flow, and heat transfer in one volume. Developed by leading educators in the field, this book sets the standard for those interested in the thermal-fluids market. Drawing on the best of what works from market leading texts in thermodynamics (Moran), fluids (Munson) and heat transfer (Incropera), this book introduces thermal engineering using a systems focus, introduces structured problem-solving techniques, and provides applications of interest to all engineers.
