Download or read book Manufacturing Technology Transfer written by Yasuo Yamane and published by CRC Press. This book was released on 2013-03-13 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a bestselling book originally published in Japanese, Manufacturing Technology Transfer: A Japanese Monozukuri View of Needs and Strategies offers time-tested methods and little-known tips for achieving successful transfer of technology along with the skills required to operate that technology. Designed to support a series of lectures on technology transfer within a master’s course on the management of technology, it presents the results of years of research carried out at Hiroshima University. The book delves into the authors’ decades of experience transferring technology between Japan and the rest of the world, particularly to developing countries from where much of the world’s future economic growth is expected. It contains case studies of successful technology transfers from both the ship building and food equipment industries. Its wide-reaching coverage examines methods of skill transfer, production management, and manufacturing company classification. Introducing readers to the engineering activities that occur within the manufacturing industry, the book illustrates the engineering technology activities involved in manufacturing, along with the production management activities required to support them. It also explains how job simulators can help shorten learning times in the manufacturing industry in the same way that flight simulators are used to teach flying skills to pilots. The book outlines a framework for teaching and learning processes that can be visualized in terms of an S-shaped learning curve. It explains how technology transfer overseas should be supported by contractual agreements between the parties concerned. Detailing the legal/contractual responsibilities for all parties involved, it also describes what you should do if problems arise during the transfer. Integrating previously unpublished research results with illustrative case studies, this book is suitable for a wide audience within the manufacturing industry—including manufacturing engineering students in both developed and developing countries, those responsible for the development of manufacturing engineers in industry and elsewhere, and anyone interested in the international activities of Japanese manufacturing companies.
Download or read book Global Manufacturing Technology Transfer written by Adedeji B. Badiru and published by CRC Press. This book was released on 2015-06-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global Manufacturing Technology Transfer: Africa-USA Strategies, Adaptations, and Management presents practical strategies for developing and sustaining manufacturing technology transfers. It is particularly useful for helping developing nations achieve and sustain a solid footing of economic development through manufacturing. The book examines Afr
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Crown Currency. This book was released on 2017-01-03 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Download or read book 21st Century Manufacturing written by Committee on 21st Century Manufacturing: The Role of the Manufacturing Extension Partnership Program of the National Institute of Standards and Technology and published by National Academies Press. This book was released on 2013-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manufacturing Extension Partnership (MEP) - a program of the U.S. Department of Commerce's National Institute of Standards and Technology - has sought for more than two decades to strengthen American manufacturing. It is a national network of affiliated manufacturing extension centers and field offices located throughout all fifty states and Puerto Rico. Funding for MEP Centers comes from a combination of federal, state, local and private resources. Centers work directly with manufacturing firms in their state or sub-state region. MEP Centers provide expertise, services and assistance directed toward improving growth, supply chain positioning, leveraging emerging technologies, improving manufacturing processes, work force training, and the application and implementation of information in client companies through direct assistance provided by Center staff and from partner organizations and third party consultants. 21st Century Manufacturing seeks to generate a better understanding of the operation, achievements, and challenges of the MEP program in its mission to support, strengthen, and grow U.S. manufacturing. This report identifies and reviews similar national programs from abroad in order to draw on foreign practices, funding levels, and accomplishments as a point of reference and discusses current needs and initiatives in light of the global focus on advanced manufacturing,
Download or read book Industrial Technology Development in Malaysia written by Greg Felker and published by Routledge. This book was released on 2013-02-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, and its companion, Technology, Competitiveness and the State, examine and evaluate Malaysian industrialization in terms of its experience of and prospects for industrial technology development. The focus is on the development of Malaysia's technological-industrial base from a sector and firm-specific perspective, including the role of foreign multinationals in this process. Industrial Technology Development in Malaysia, provides a valuable analysis of the technological development of a Newly Industrializing Country and reflects on whether existing development strategies can be maintained in the wake of the financial crises sweeping the East Asian economies.
Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book Technology Transfer written by Goel Cohen and published by SAGE. This book was released on 2004-02-20 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book identifies the major factors responsible for effective transfer of information and human expertise from an advanced country or a multinational corporation to the developing world.
Download or read book Reinventing the Product written by Eric Schaeffer and published by Kogan Page Publishers. This book was released on 2019-03-03 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create the personalized and compelling experiences that today's customers expect by harnessing AI and digital technologies to create smart connected products, with this cutting-edge guide from senior leaders at Accenture. Digital technology is both friend and foe: highly disruptive, yet it cannot be ignored. As traditional products transform into smart connected products faster than ever before, companies that fail to make use of it now put themselves in the firing line for disintermediation or even eradication. However, digital technology is also the biggest opportunity for product-making businesses to create the next generation of goods in the marketplace. In Reinventing the Product, Eric Schaeffer and David Sovie, both Senior Managing Directors at Accenture, show how this reinvention is made possible, to deliver truly intelligent, and often even autonomous, products. Reinventing the Product makes the case for companies to rethink their product strategy, innovation and engineering processes, including: - How to harness the opportunities of AI and digital technologies, such as IoT sensors, blockchain, advanced analytics, cloud and edge computing - Practical advice on transforming their entire culture to build the future of successful 'living products' - Features case studies from global organizations such as Faurecia, Signify, Symmons and Haier and interviews with thought leaders from top companies including Amazon, ABB, Tesla, Samsung and Google This book provides the only advice any product-making company needs as it embarks on, or accelerates, its digitization journey.
Download or read book Globalization of Technology written by Proceedings of the Sixth Convocation of The Council of Academies of Engineering and Technological Sciences and published by National Academies Press. This book was released on 1988-02-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological revolution has reached around the world, with important consequences for business, government, and the labor market. Computer-aided design, telecommunications, and other developments are allowing small players to compete with traditional giants in manufacturing and other fields. In this volume, 16 engineering and industrial experts representing eight countries discuss the growth of technological advances and their impact on specific industries and regions of the world. From various perspectives, these distinguished commentators describe the practical aspects of technology's reach into business and trade.
Download or read book China s Industrial Technology written by Shulin Gu and published by Routledge. This book was released on 2004-01-14 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a comprehensive review of reform policy, followed by an examination of major approaches to institutional restructuring, Shulin Gu explores the way in which China's industrial technology has responded to economic reforms. At the heart of the work is the argument that market reform and organisational change are closely interdependent. Gu outlines the interaction of the two in China and reveals the damage which may result if market reform is not accompanied by new organisational design. Analysis of these issues is drawn from first-hand experience of Chinese technology systems, supported by insights from technological innovation economics and transaction cost economics.
Download or read book Manufacturing and Enterprise written by Adedeji B. Badiru and published by CRC Press. This book was released on 2018-12-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an integrated systems approach to manufacturing and business enterprise. Traditionally, these topics are treated as separate and independent subjects, but the practical fact is that the manufacturing and the business enterprises are intertwined. Currently, there is no book on the market that addresses both subjects from an integrated systems engineering approach with a manufacturing engineering foundation. Topics covered include engineering process, systems modeling, business enterprise, forecasting, inventory management, product design, and project management. Features Provides in-depth treatment of modern manufacturing processes, systems, and tools Uses an integrated systems life-cycle approach to manufacturing and business Includes business proposals Discusses prototype manufacturing and/or business development processes Presents concepts, steps, and procedures for achieving an integrated enterprise of manufacturing and business
Download or read book Technological Progress and the Transformation of China s Economic Development Mode written by Wen Xiao and published by Springer Nature. This book was released on 2020-10-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores how technological progress accelerates the transformation of economic development by adopting a fundamental logical approach to technological progress, intensive inputs, and promotion of productive efficiency to transformation of economic development. It investigates the internal mechanisms and the choice of corresponding modes that initiate technological progress to accelerate the transformation of economic development at three basic research levels: micro-enterprise level, mid-industry level and macro-economy level. Based on the above research, the book summarizes four dimensions facilitating the transformation: agricultural intensification, new industrialization, modernization of the service industry and the advanced manufacturing industry, and linkage of the modern service industry. This book is especially valuable in its hierarchical categorization covering theoretical, empirical, industrial and strategic exploration. On one hand, it analyzes the mechanisms and approaches influencing the transformation of economic development driven by technological progress from both theoretical and empirical perspectives. On the other hand, based on the introduction of advanced international experiences, it probes into the guarantee basis for the strategic implementation and the corresponding mode choices of the transformations. Furthermore, it offers specific policy proposals from both the macro level of how technological progress promotes the transformation of economic development and the micro level covering the agricultural, industrial and service industries.
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1983 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Institutional Change in Southeast Asia written by Fredrik Sjöholm and published by Psychology Press. This book was released on 2005 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Institutional Change in Southeast Asiaexamines the institutional changes taking place in, and challenges facing, the region since 1997. The book focuses on determinants to the adjustments and on implementations of the reforms. It also describes various differences in the reform process between countries in the region. Southeast Asia's economic development over the last decades has been impressive. Most of the region achieved consistently high growth rates accompanied by significant structural transformation and industrialization, poverty alleviation and improvements in their overall standard of living as indicated by such social indicators as greater longevity, more widespread delivery of basic education and lower infant mortality rates. However, the crisis that struck Southeast Asia in 1997 had severe economic, social and political consequences in the region. It also threw into doubt the future economic prosperity of the countries in Southeast Asia and raised intriguing questions about the quality of their institutions and their approach to economic development. Sjöholm and Tongzon argue that the economies of Southeast Asia need to reform their institutions if the previous rapid development is to continue. The institutional weaknesses have been addressed to different degrees and with different success in the affected countries. Against the backdrop of Southeast Asia's importance in the world economy, it is hardly possible to overestimate the need to understand this process of change.
Download or read book A Study on Globalizing Cities written by Zhenhua Zhou and published by World Scientific. This book was released on 2014-01-24 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Study on Globalizing Cities is the latest masterpiece by Zhou Zhenhua, a famous Chinese economist, who closely tracks the theoretical study of global cities and is actively engaged in the strategic research of Shanghai''s development. With rich empirical data and an in-depth analysis, this book is of great theoretical and practical significance. Different from studies on global cities by renowned western scholars, this book extends its perspective to globalizing cities. It explores a unique development model for China''s globalizing cities by adopting a creative angle of observation and analytical methods. By criticizing that the traditional global city theory derives the logic relations of global cities directly from globalization, Mr Zhou puts forward the concept of globalization city, which is introduced as a new intermediate explanatory variable. More importantly, this book emphasizes that the building of global cities is not only dependent on the distribution of urban space and urban economic development but also on comprehensive construction of multiple structures and functions of cities.
Download or read book Transfer of Technology from Federal Laboratories written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Technology and Competitiveness and published by . This book was released on 1991 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
